NextSDS Logo
p-

p-Phenetidin

DANGER liquid SDS/MSDS

Chemical Product Identification & Regulatory Data

Official chemical identifiers, CAS numbers, and regulatory compliance information

Basic Product Information

Product Name
p-Phenetidin
Product Code
000000000062533938

Regulatory Identifiers

CAS Number
N/A

Chemical Abstracts Service registry number - unique identifier for chemical substances

Uses Information

Identified Uses
Industrial use

Overview

p-Phenetidin is a liquid substance commonly used industrial use.

Manage Your Safety Data Sheets

Organize and access your chemical safety data with ease.

GHS Hazard Classification & Safety Warnings

Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications

Classification Status

Classified

Signal Word

danger (Danger)

Hazard Classifications

Acute Tox. Category 4 H302
Acute Tox. Category 3 H331
Acute Tox. Category 4 H312
Eye Irrit. Category 2 H319
Skin Sens. Category 1 H317
Muta. Category 2 H341
Aquatic Chronic Category 3 H412

GHS Hazard Pictograms & Safety Symbols

GHS06 GHS Hazard Pictogram: Acute toxicity hazard - Poisonous materials that can cause death or serious harm

GHS06

GHS07 GHS Hazard Pictogram: Health hazard warning - Materials harmful to health including irritants and sensitizers

GHS07

GHS08 GHS Hazard Pictogram: Serious health hazard - Carcinogenic, mutagenic, or toxic to organs

GHS08

GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions

Hazard Statements

  • H302: Harmful if swallowed.
  • H312: Harmful in contact with skin.
  • H317: May cause an allergic skin reaction.
  • H319: Causes serious eye irritation.
  • H331: Toxic if inhaled.
  • H341: Suspected of causing genetic defects.
  • H412: Harmful to aquatic life with long lasting effects.

Precautionary Statements

  • P201: Obtain special instructions before use.
  • P261: Avoid breathing mist or vapours.
  • P264: Wash skin thoroughly after handling.
  • P273: Avoid release to the environment.
  • P280: Wear protective gloves/ protective clothing/ eye protection/ face protection.
  • IF ON SKIN: Wash with plenty of water. Call a POISON CENTER/ doctor if you feel unwell.
  • IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/ doctor.
  • P308+P313: IF exposed or concerned: Get medical advice/ attention.
  • P333+P313: If skin irritation or rash occurs: Get medical advice/ attention.
  • P403+P233: Store in a well-ventilated place. Keep container tightly closed.

Chemical Manufacturers & Supply Chain

Authorized suppliers, manufacturers, and distribution network information

LANXESS Deutschland GmbH

undefined

๐Ÿ“

Production, Technology, Safety & Environment 51369 Leverkusen, Germany

๐ŸŒ

DE

๐Ÿ“ž

+49 221 8885 2288

24/7 Emergency Response & Poison Control

Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies

CHEMTREC EMEA

๐Ÿ“ž

+44 20 3885 0382

๐ŸŒ

GB

๐Ÿ•’

24/7

๐Ÿ’ก

mention CCN 1001748

Chemical Composition & Hazardous Ingredients

Detailed component analysis, concentration ranges, and hazardous substance identification

Product Type

Substance

Chemical Components & Hazardous Substances

Chemical Name CAS Number Concentration Hazardous
4-ethoxyaniline
EC: 205-855-5
156-43-4 90-100% โš ๏ธ Hazardous
2-ethoxyaniline
EC: 202-356-4
94-70-2 0.1-1% โš ๏ธ Hazardous
hydrazine
EC: 206-114-9
302-01-2 0.025-0.1% โš ๏ธ Hazardous
4-chloroaniline
EC: 203-401-0
106-47-8 0.025-0.1% โš ๏ธ Hazardous

Emergency First Aid Measures

Critical first aid procedures for chemical exposure incidents and medical emergencies

๐Ÿซ Inhalation Exposure

Move the victim to fresh air. Keep patient warm and at rest. If breathing is labored, administer oxygen. If unconscious, place in recovery position and get medical attention immediately. Keep respiratory tract clear. Loosen tight clothing such as a collar, tie, belt or waistband.

Symptoms:

If breathing is labored. Symptoms may be delayed.

๐Ÿ–๏ธ Skin Contact

Take off contaminated clothing and shoes immediately. Wash skin immediately with plenty of water and soap. Subsequent cleansing with polyethyleneglycol 400, then again with water and soap.

Symptoms:

May cause an allergic skin reaction. Blueness of lips, skin or nails (cyanosis).

๐Ÿ‘๏ธ Eye Contact

Rinse immediately with plenty of water, also under the eyelids, for at least 10 minutes. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist.

Symptoms:

Serious eye irritation.

๐Ÿฝ๏ธ Ingestion/Swallowing

Do not induce vomiting without medical advice. Never give anything by mouth to an unconscious person. Rinse mouth, ingest activated charcoal. If vomiting occurs, the head should be kept low so that vomit does not enter the lungs.

Symptoms:

Harmful if swallowed.

๐Ÿšจ Immediate Medical Attention Required

Get medical attention immediately. If unconscious, place in recovery position and get medical attention immediately. If eye irritation persists, consult a specialist. Get medical attention.

Medical Treatment

Elementary aid, decontamination, symptomatic treatment and depending on the formation of methaemoglobin: intravenous administration of toluidine blue or other redox dyes according to dosage specifications plus ascorbic acid.

Related Chemical Substances & Alternative Products

Similar chemicals with comparable safety profiles and industrial applications

Technical Specifications & Material Properties

Physical state, chemical properties, melting point, boiling point, and material characteristics

๐Ÿงช Physical State
liquid
Critical Property
๐Ÿ“Š Physical State Data
liquid
๐Ÿ“Š State Under Standard Conditions
Not available
๐Ÿ‘๏ธ Appearance
Liquid
๐ŸŽจ Colour
brown
๐Ÿ“Š Colour Intensity
Not available
๐Ÿ“Š Form
Not available
๐Ÿ‘ƒ Odor
No data available
๐Ÿ“Š Odor Threshold
No data available
๐Ÿงช Ph
No data available
๐ŸงŠ Melting Point
No data available
Critical Property
๐Ÿ’จ Boiling Point
No data available
Critical Property
๐Ÿ”ฅ Flash Point
- 100 C
Critical Property
๐Ÿ“Š Freezing Point
Not available
๐Ÿ“Š Softening Point
Not available
๐Ÿ“Š Solidification Point
Not available
๐Ÿ“Š Cloud Point
Not available
๐Ÿ“Š Crystallisation Point
Not available
๐Ÿ“Š Relative Evaporation Rate
Not available
๐Ÿ’จ Evaporation Rate
No data available
๐Ÿ’จ Vapor Pressure
No data available
๐Ÿ“Š Vapor Density
Not available
๐Ÿ“Š Relative Density
No data available
๐Ÿ“Š Bulk Density
Not available
โš–๏ธ Density
No data available
Critical Property
๐Ÿ”ฅ Flammability
No data available
๐Ÿ“Š Upper Explosive Limit
No data available
๐Ÿ“Š Lower Explosive Limit
No data available
๐Ÿ“Š Explosive Limits
Not available
๐Ÿ“Š Auto Ignition Temperature
No data available
๐Ÿ“Š Decomposition Temperature
No data available
๐Ÿ’ง Solubility
No data available
๐Ÿ“Š Partition Coefficient
No data available
๐Ÿ“Š Solubility In Water
No data available
๐Ÿ“Š Solubility In Fat
Not available
๐Ÿ“Š Molecular Weight
No data available
๐Ÿ“Š Voc Content
Not available
๐Ÿ“Š Metal Corrosion
Not available
๐Ÿ“Š Dynamic Viscosity
No data available
๐Ÿ“Š Kinematic Viscosity
No data available
๐Ÿ“Š Properties Status
Not available

Exposure Controls & Personal Protective Equipment (PPE)

Occupational exposure limits, engineering controls, and required safety equipment

๐Ÿญ Engineering Controls

If user operations generate dust, fumes, gas, vapour or mist, use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure to airborne contaminants below any recommended or statutory limits.

๐Ÿงค Hand Protection

Material : Fluorinated rubber - FKM Break through time : >= 8 h Glove thickness : >= 0,4 mm Wearing time : < 60 min Material : Butyl rubber - IIR Break through time : >= 8 h Glove thickness : >= 0,5 mm Wearing time : < 60 min Remarks : The suitability for a specific workplace should be discussed with the producers of the protective gloves. After contamination with product change the gloves immediately and dispose of them according to relevant national and local regulations

๐Ÿ‘๏ธ Eye Protection

Tightly fitting safety goggles Wear face-shield and protective suit for abnormal processing problems.

๐Ÿ˜ท Respiratory Protection

In the case of vapour formation use a respirator with an approved filter. Wear breathing apparatus with separate air supply (compressed air respirator, tube apparatus) at higher concentrations. Filter type : Combined particulates and organic vapour type (A-P) P3 filter

๐Ÿฆบ Skin/Body Protection

Complete suit protecting against chemicals Choose body protection according to the amount and concentration of the dangerous substance at the work place.

Transportation & Shipping Information

UN numbers, shipping names, transport classes, and regulatory transport requirements

๐Ÿท๏ธ UN Number

2311

๐Ÿ“ฆ Proper Shipping Name

PHENETIDINES

โš ๏ธ Transport Hazard Class

6.1

๐Ÿ“‹ Packing Group

III

Chemical Safety FAQ & Common Questions

Most frequently asked questions about safety, handling, storage, and regulatory compliance

What is the hazard signal word for p-Phenetidin?

The signal word for this substance is "danger".

What is the physical form of p-Phenetidin?

p-Phenetidin is a liquid appearing as liquid with brown color. It has no data available odor.

What is the solubility of p-Phenetidin?

No data available

What is p-Phenetidin used for?

Industrial use

What are the hazard statements for p-Phenetidin?

This substance has 7 hazard statements: H302: Harmful if swallowed. H312: Harmful in contact with skin. H317: May cause an allergic skin reaction. H319: Causes serious eye irritation. H331: Toxic if inhaled. H341: Suspected of causing genetic defects. H412: Harmful to aquatic life with long lasting effects.

What is the melting point of p-Phenetidin?

The melting point is No data available and the boiling point is No data available.