Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Phenyl-pyrrolidin-1-yl-acetic acid
- Product Code
- 028346
Regulatory Identifiers
- CAS Number
- 100390-48-5 Check regulations →
Identified Uses
For R&D use only.
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Phenyl-pyrrolidin-1-yl-acetic acid | 100390-48-5 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove victim from source of exposure to fresh air. If breathing is difficult, administer oxygen.
Wash thoroughly with soap and plenty of water.
Immediately flush eyes with running water for at least 15 minutes while keeping eyes open.
Do not induce vomiting. Give water to victim to drink.
Immediate Medical Attention
Seek medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use carbon dioxide, dry chemical powder, alcohol-resistant or polymer foam.
emits toxic fumes under fire conditions.
Firefighter Protection
Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment. Avoid breathing fumes, vapors, mists or gas. Ventilate area. Remove all sources of ignition. Evacuate personnel.
Prevent further leakage if safe to do so.
place in closed container for disposal
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid prolonged use. Avoid all direct contact with material. Do not breathe dust or vapor. Wash thoroughly after handling.
Keep container tightly closed. Store in a cool, dry, well-ventilated area.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation during use.
Wear chemical-resistant gloves.
Wear protective safety goggles or face shields tested and approved under appropriate government standards such as NIOSH (US) or EN 166 (EU).
Approved respiratory equipment must be used when airborne concentrations are unknown or exceed the exposure limits.
Wear protective clothing and boots.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
no data available
no data available
Strong oxidizing agents.
May evolve carbon monoxide, carbon dioxide, and nitrogen oxides.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dissolve in or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Dissolve in or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Phenyl-pyrrolidin-1-yl-acetic acid?
The signal word is warning.
What is the physical form of Phenyl-pyrrolidin-1-yl-acetic acid?
Phenyl-pyrrolidin-1-yl-acetic acid is a solid appearing as solid . It has no data available odor.
What is the solubility of Phenyl-pyrrolidin-1-yl-acetic acid?
no data available
What is Phenyl-pyrrolidin-1-yl-acetic acid used for?
For R&D use only.
What are the hazard statements for Phenyl-pyrrolidin-1-yl-acetic acid?
This substance has 3 hazard statements:
- H303: May be harmful if swallowed
- H313: May be harmful in contact with skin
- H333: May be harmful if inhaled
What is the melting point of Phenyl-pyrrolidin-1-yl-acetic acid?
The melting point is no data available and the boiling point is no data available.