Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Peptid4® S-Control
- Chemical Name
- Propanediol (and) Tripeptide-85 (and) Water
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
SU3 - Industrial uses: Uses of substances as such or in preparations at industrial sites / PC39 - Cosmetics, Personal Care Products.
Manufacturers & Suppliers
Chemyunion Ltda
manufacturer
Avenida Independência, 1501, Iporanga. CEP: 18087-101- Sorocaba – São Paulo.
+55 (15) 2102-2000
Emergency Contacts
Emergency Contact
+55 (15) 2102-2002
Emergency Contact
+55 (15) 2102-2086
Suatrans
+55 (11) 3526-3526
Suatrans
0800 707 7022
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Tripeptide consisting of glutamic acid, valine and phenylalanine in 1,3-propanediol.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Propanediol | 504-63-2 | 97.5 - 99% | No |
| Tripeptide-85 | 31461-61-7 | 0.5 - 1.5% | No |
| Water (EU: Aqua; JPN: Onsen-Sui) | 7732-18-5 | 0.5 - 1% | No |
None.
Notes
None.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove the victim to fresh air and seek immediate medical attention, if necessary. If not breathing, give artificial respiration or oxygen.
Wash skin with soap and water and remove the contaminated clothes and shoes. If skin irritation persists, seek medical attention.
Flush eyes with plenty of clean water, keeping the eyes opened to assure the product's removal. Seek medical attention immediately, if necessary.
Wash mouth abundantly with water. Do not induce vomit or ingest liquid unless directed to do so by medical personnel. Never give anything by month to an unconscious person. Obtain medical attention.
Immediate Medical Attention
If necessary, look for medical attention immediately taking the label or SDS of the product.
Medical Treatment
Symptomatic treatment.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry chemical, carbon dioxide, foam, and water in fog form.
Do not use direct water stream, unless operated by trained person.
In case of fire, carbon dioxide, carbon monoxide and water in fog form may be released. In certain combustion conditions, traces of other toxic substances may not be excluded.
Firefighter Protection
Full protective clothing including self contained breathing apparatus (SCBA).
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use suitable protective equipment (Section 8). Floor may become slippery.
Avoid material from entering drains and rivers.
Remove the product mechanically with adequate absorbent material, as shovel, broom, etc. Water is indicated to be used freely with any common detergent.
Materials: shovel, broom, absorbent material, water, common detergent
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep preemptively away from sources of ignition and heat.
Store under refrigeration between 2 to 8°C. The product may present precipitate formation, it is recommended to shake before use. Product remains stable until expiry date indicated if stored in its original sealed packaging.
Wash contaminated clothing before reuse. Wash hands before and after handling. Use disposable surgical mask to prevent contamination of the product. Do not eat, drink or smoke when handling the product.
Not applicable. Product not flammable under usual conditions. Keep preemptively away from sources of ignition and heat.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use appropriated protection equipment. No engineering control measure is required. However, it is recommended ensure adequate ventilation and keep shower and eyewash near the workplace. No special requirements under normal use conditions.
Protective gloves.
Safety glasses.
Disposable mask.
Apron and rubber or PVC boots.
Avoid material from entering drains and rivers. No special requirements under normal use conditions.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Product is stable under regular conditions.
Not available.
None known.
Dust, humidity, open packaging, inappropriate handling and elevated temperatures.
Strong oxidizing agents. Sulfuric acid. Phosphoric acid. Acetic anhydride.
In case of fire, carbon dioxide, carbon monoxide and water in fog form may be released. In certain combustion conditions, traces of other toxic substances may not be excluded.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose in compliance with local laws and regulation.
Do not reuse the package. Dispose in compliance with local laws and regulation.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- Shipping Name
- Not applicable
- Transport Class
- Not applicable
- Packing Group
- Not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
In compliance with Occupational Safety and Health regulations.
None.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Peptid4® S-Control?
The signal word is no signal word.
What is the physical form of Peptid4® S-Control?
Peptid4® S-Control is a limpid to opalescent liquid appearing as limpid to opalescent liquid. colorless to light yellow. the product may present precipitate formation. with colorless to light yellow color. It has characteristic odor.
What is the solubility of Peptid4® S-Control?
Soluble in water, glycols and alcohols. Insoluble in oils.
What is Peptid4® S-Control used for?
SU3 - Industrial uses: Uses of substances as such or in preparations at industrial sites / PC39 - Cosmetics, Personal Care Products.
What is the melting point of Peptid4® S-Control?
The melting point is Not available and the boiling point is Not available.