NextSDS Logo
Safety Data Sheet EN

Bobcat Propylene Glycol Antifreeze & Coolant Premix

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Bobcat Propylene Glycol Antifreeze & Coolant Premix
Product Code
13428

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Coolant

Uses advised against

Not Determined

Manufacturers & Suppliers

B

Bobcat

manufacturer

PO Box 128 Gwinner, ND 58040-0128

701-241-8700

Emergency Contacts

CHEMTREC

1-800-424-9300

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Chemical Name CAS Number Concentration Hazardous
1,2 Propyleenglycol EC: 200-338-0 57-55-6 45 - 55% No
Water EC: 231-791-2 7732-18-5 45 - 55% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If you feel unwell or concerned: Get medical advice/attention.

Skin contact

Call a doctor if you feel unwell.

Eye contact

cautiously rinse eyes with lukewarm, gently flowing water for 5 minutes, while holding the eyelids open.

Symptoms: Irritation

Ingestion

Rinse mouth. Do NOT induce vomiting. If vomiting occurs naturally, lie on your side, in the recovery position.

Immediate Medical Attention

If eye irritation persists: Get medical advice/attention. Call a doctor if you feel unwell. If you feel unwell or concerned: Get medical advice/attention.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Use adequate ventilation when working with material in an enclosed area. Mechanical methods such as fume hoods or area fans may be used to reduce localized vapor/mist areas. If vapor or mist is generated when the material handled, adequate ventilation in accordance with good engineering practice must be provided to maintain concentrations below the specified exposure.

Hands

Impervious, chemically resistant gloves such as neoprene or nitrile rubber to avoid skin sensitization and absorption.

Eyes

Eye protection is strongly recommended. Wear safety glasses with side shields or vented/splash proof goggles (ANSI Z87.1 or approved equivalent).

Respiratory

None required if ventilation is adequate. Otherwise a respiratory protection program meeting OSHA 1910.134 and ANSI Z88.2 requirements must be followed. Where misting may occur, wear an MSHA/NIOSH approved (or equivalent) half-mask form dust/mist air purifying respirator.

Skin/Body

Use of an apron and overboots of chemically impervious materials such as neoprene or nitrile rubber is recommended based on level of activity and exposure. Launder soiled clothes. Properly dispose of contaminated leather articles and other materials which cannot be decontaminated.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Kinematic Viscosity
Not determined.
Solubility In Water
Miscible in water
Auto Ignition Temperature
Not determined.
Colour Intensity
---
Bulk Density
---
Physical State Data
---
Melting Point
-37 (-34F)
Relative Evaporation Rate
---
Softening Point
---
Relative Density
1.04 @ 15.6
Cloud Point
---
Crystallisation Point
---
Flammability
Non-flammable
Odor
---
Properties Status
---
Form
---
State Under Standard Conditions
---
Boiling Point
125C (257F)
Decomposition Temperature
Not determined.
Ph
Not determined.
Explosive Limits
---
Dynamic Viscosity
Not determined.
Partition Coefficient
Not determined.
Solubility In Fat
negligible in most petroleum solvents.
Upper Explosive Limit
Non-flammable
Solubility
Miscible in water, negligible in most petroleum solvents.
Colour
purple
Vapor Density
Not determined.
Voc Content
---
Odor Threshold
Not determined.
Flash Point
104C.
Metal Corrosion
---
Solidification Point
---
Appearance
Clear, purple
Density
---
Molecular Weight
---
Physical State
---
Vapor Pressure
< 0.1 mm Hg @ 20
Freezing Point
-37 (-34F)
Lower Explosive Limit
Non-flammable
Evaporation Rate
Not determined.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Bobcat Propylene Glycol Antifreeze & Coolant Premix?

The signal word is no signal word.

What is the solubility of Bobcat Propylene Glycol Antifreeze & Coolant Premix?

Miscible in water, negligible in most petroleum solvents.

What is Bobcat Propylene Glycol Antifreeze & Coolant Premix used for?

Coolant

What is the melting point of Bobcat Propylene Glycol Antifreeze & Coolant Premix?

The melting point is -37 (-34F) and the boiling point is 125C (257F).

Compliance Scanner

Scan your compliance