Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Styrofan® D 422
- Product Code
- 30041944
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
grondstof, alleen voor industriële doeleinden
Manufacturers & Suppliers
BASF SE
manufacturer
67056 Ludwigshafen, GERMANY
BASF Belgium Coordination Center Comm. V.
national supplier
Drève Richelle 161 E Bte 43, 1410 WATERLOO, BELGIUM
+31 26 371 71 71
Emergency Contacts
Centre Antipoisons / Antigifcentrum
+32 70 245 245
Internationaal noodnummer
+49 180 2273-112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
waterige polymeerdispersie op basis van:styreen, 1,3-butadieen
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| fenol, 4-methyl-, reactieprodukten met dicyclopentadieen en isobutyleen EC: 271-867-2 | 68610-51-5 | 0.2% | Yes |
| 1,2-benzisothiazool-3(2H)-on EC: 220-120-9 | 2634-33-5 | 450% | Yes |
| mixture of: 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one | 55965-84-9 | 15% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Rust, frisse lucht, doktershulp.
Met water en zeep grondig wassen.
Direct en tenminste 15 minuten met opengesperde oogleden d.m.v. stromend water grondig spoelen, oogarts raadplegen.
Mond uitspoelen en dan 200-300 ml water drinken. Braken enkel uitlokken wanneer dit door een antigifcentrum (BE) of vergiftigingeninformatiecentrum (NL) of een arts wordt opgedragen.
Immediate Medical Attention
Behandeling: behandeling van de symptomen (verwijderen van de verontreinigende stof, controle van de vitale functies).
Medical Treatment
behandeling van de symptomen (verwijderen van de verontreinigende stof, controle van de vitale functies).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
verneveld water, bluspoeder, schuim, kooldioxide
Geen bijzondere gevaren bekend.
Het product zelf brandt niet; blusmaatregelen afstemmen op de omgevingsbrand.
Firefighter Protection
Geen gegevens beschikbaar.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Met vloeistof absorberend materiaal (b.v. zand, zaagmeel, universeel bindmiddel, kiezelgoer) opnemen.
Product wegpompen.
Product niet zonder voorbehandeling in water terecht laten komen.
Met vloeistof absorberend materiaal opnemen; Product wegpompen.
Materials: zand, zaagmeel, universeel bindmiddel, kiezelgoer
Related Products
Similar products with comparable safety profiles
Styrene D8
CAS: 19361-62-7
Styrene Monomer -ST
CAS: 100-42-5
Stenol® 1822 A
---
FoamStar® PB 2706
UFI: D5YA-J36E-1003-EV31
FoamStar® PB 2706
UFI: D5YA-J36E-1003-EV31
FoamStar® PB 2706
UFI: RM8F-9H1Q-D00X-DF40
Styreen ≥99,5 %, voor synthese, gestabiliseerd
CAS: 100-42-5
SILFOAM® SE 47
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Bij omgang met chemicaliën gebruikelijke voorzorgsmaatregelen in acht nemen. Bij langere opslag kunnen zich geringe hoeveelheden koolmonoxide vormen. Het binnengaan van containers / tanks mag uitsluitend plaatsvinden na een grondige reiniging en nadat zeker gesteld is dat restdampen verwijderd zijn. Daarbij dienen nationale wetgeving en internationale normen voor besloten ruimten in acht te worden genomen. Bij twijfel is een koolmonoxide-concentratiemeting noodzakelijk.
Vorstvrij opslaan.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Geschikte chemicalienbestendige handschoenen (EN ISO 374-1) ook bij langer direkt contact (aanbeveling: beschermingsindex 6, overeenkomstig > 480 minuten doordringbaarheidstijd (permeatie) volgens EN ISO 374-1): b.v. nitrilrubber (0,4 mm), chloropreenrubber (0,5 mm), butylrubber (0,7 mm), e.a.
veiligheidsbril met zijkleppen (bril met montuur) (bv. EN 166)
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxiciteit
12.2. Persistentie en afbreekbaarheid
12.3. Bioaccumulatie
12.4. Mobiliteit in de bodem
12.5. Resultaten van PBT- en zPzB-beoordeling
12.6. Hormoonontregelende eigenschappen
12.7. Andere schadelijke effecten
12.2. Persistentie en afbreekbaarheid
Het product kan door abiotische processen, zoals adsorptie aan actief slib, grotendeels uit het water worden geëlimineerd.
12.3. Bioaccumulatie
Het polymere aandeel is op basis van zijn structurele eigenschappen niet biologisch beschikbaar. Accumulatie in organismen is niet te verwachten.
12.4. Mobiliteit in de bodem
Geen gegevens beschikbaar over de mobiliteit in de bodem.
12.5. Resultaten van PBT- en zPzB-beoordeling
Het product bevat geen stof die aan de PBT criteria of aan de vPvB criteria voldoet.
12.6. Hormoonontregelende eigenschappen
Het product bevat geen stoffen met hormoonontregelende eigenschappen boven de wettelijke grenswaarden.
12.7. Andere schadelijke effecten
Geen gegevens beschikbaar.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- Shipping Name
- Niet van toepassing
- Transport Class
- Niet van toepassing
- Packing Group
- Niet van toepassing
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Styrofan® D 422?
The signal word is no signal word.
What is the physical form of Styrofan® D 422?
Styrofan® D 422 is a vloeibaar with wit color. It has aromatisch odor.
What is Styrofan® D 422 used for?
grondstof, alleen voor industriële doeleinden
What is the melting point of Styrofan® D 422?
The melting point is 0 ℃ and the boiling point is 100 ℃.