Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Bleko - Ontweringswater
- Product Code
- 1011380
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- QG0C-WW43-0207-PPU4
Identified Uses
Reiniger
Uses advised against
Al het dergelijke gebruik wordt niet gespecificeerd in deze rubriek noch in rubriek 7.3
Manufacturers & Suppliers
Bleko Chemie BV
manufacturer
Het Lentfert 3, 7547 SN Enschede - Netherlands
+31 (0)53 431 58 35
http://www.blekochemie.nl
Emergency Contacts
NVIC
088-755 8000
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Zure oplossing
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| ethanol EC: 200-578-6 | 64-17-5 | 10 - 25% | Yes |
| oxaalzuur EC: 205-634-3 | 144-62-7 | 2.5 - 10% | Yes |
Voor meer informatie over het gevaarlijke karakter van de stoffen de rubrieken 11, 12 en 16 raadplegen. Acute toxiciteitsschatting voor de stof in deel 3 van bijlage VI bij Verordening (EG) nr. 1272/2008 of die zijn vastgesteld overeenkomstig bijlage I bij die verordening: Identificatie Acute toxiciteit Soort oxaalzuur LD50 oraal 500 mg/kg (ATEi) CAS: 144-62-7 LD50 via de huid 1100 mg/kg (ATEi) EC: 205-634-3 LC50 inademing Niet van toepassing
First Aid Measures
Emergency procedures for chemical exposure incidents
De betrokken persoon weghalen uit de zone van blootstelling en hem/haar verse lucht toedienen. Medische hulp inroepen indien de symptomen verergeren of aanhouden.
Verontreinigde kleren en schoenen uit te doen, de huid te wassen of de betrokken personen zo nodig te douchen met overvloedig koud water en neutrale zeep. In geval van aandoening zeker een arts raadplegen.
Spoelen gedurende minstens 15 minuten met overvloedig water op kamertemperatuur. Vermijden dat de betrokken persoon in zijn/haar ogen wrijft of ze sluit. Indien de betrokken persoon contactlenzen draagt, moeten die verwijderd worden op voorwaarde dat ze niet aan de ogen kleven, aangezien dan bijkomende letsels kunnen optreden. In elk geval na het wassen zo snel mogelijk een arts raadplegen met het veiligheidsinformatieblad van het product.
Het braken niet opwekken, indien de betrokken persoon toch moet braken zijn/haar hoofd naar voren buigen om inademing van braaksel te voorkomen. De betrokken persoon laten rusten. De mond en keel spoelen, aangezien die aangetast kunnen zijn door de opname.
Symptoms: De mond en keel spoelen, aangezien die aangetast kunnen zijn door de opname.
Immediate Medical Attention
Niet van toepassing
Medical Treatment
Niet van toepassing
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Installation of emergency showers and/or eye baths in warehouses, considering applicable standards for chemical storage. Emergency shower standards: ANSI Z358-1, ISO 3864-1:2011, ISO 3864-4:2011. Eye bath standards: DIN 12 899, ISO 3864-1:2011, ISO 3864-4:2011.
Disposable chemical protection gloves (Material: Linear low-density polyethylene (LLPDE), Penetration time: > 480 min, Thickness: 0.062 mm). Standard: EN ISO 21420:2020. Replace gloves upon signs of deterioration. As the product is a mixture of different materials, the resistance of the gloves cannot be fully reliably calculated and must therefore be checked before application.
Chemical safety glasses (wide-vision goggles) with side shields. Standards: EN 166:2002, EN ISO 4007:2018. Daily cleaning and regular disinfection according to manufacturer's instructions. Use is recommended in case of splash risk.
The use of protective equipment is necessary in case of mist formation or if occupational exposure limits are exceeded.
Work clothing: Replace upon any sign of deterioration. For long periods of exposure to the product, CE III is recommended for commercial/industrial users, in accordance with EN ISO 6529:2013, EN ISO 6530:2005, EN ISO 13688:2013, EN 464:1994. Anti-slip work shoes: Replace upon any sign of deterioration. For long periods of exposure to the product, CE III is recommended for commercial/industrial users, in accordance with EN ISO 20345:2012 and EN 13832-1:2007.
Under EU environmental protection legislation, it is recommended to prevent the discharge of both the product and its packaging. For more information, see section 7.1.D.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1993
- Shipping Name
- BRANDBARE VLOEISTOF, N.E.G. (ethanol)
- Transport Class
- 3
- Packing Group
- III
Bijzondere bepalingen: 274, 223, 955
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Bleko - Ontweringswater?
The signal word is warning.
What is the physical form of Bleko - Ontweringswater?
Bleko - Ontweringswater is a vloeibaar appearing as vloeistof with kleurloos color. It has ruikt naar alcohol odor.
What is the solubility of Bleko - Ontweringswater?
Oplosbaar in water
What is Bleko - Ontweringswater used for?
Reiniger
What are the hazard statements for Bleko - Ontweringswater?
This substance has 1 hazard statement:
- H319: Veroorzaakt ernstige oogirritatie.
What is the melting point of Bleko - Ontweringswater?
The melting point is Niet van toepassing * and the boiling point is 95 °C.