Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
Shell Turbo Oil T 68 is a vloeibaar bij kamertemperatuur. substance commonly used turbineolie..
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
GHS Hazard Pictograms & Safety Symbols
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
Precautionary Statements
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
Belgian Shell NV/SA
manufacturer
Kantersteen Cantersteen 47 B-1000 Brussel - Bruxelles
BE
(+32) 02508 9298
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Emergency Contact
+32 2 2167469
BE
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
mixtureGeneral Composition
Hoog geraffineerde minerale olin en additieven. Deze hoog geraffineerde olie bevat <3% (w/w) DMSO extract, bepaald volgens IP346.
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| (4-nonylfenoxy)azijnzuur EC: 221-486-2 | 3115-49-9 | 0.01-0.09% | ⚠️ Hazardous |
| N-fenyl-1-nafthylamine EC: 201-983-0 | 90-30-2 | 0.1-0.24% | ⚠️ Hazardous |
| Verwisselbare laag visceuze basisolie (<20,5 mm/s @ 40C) * | N/A | 90% | ⚠️ Hazardous |
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Onder normale gebruiksomstandigheden is behandeling niet nodig. Indien symptomen aanhouden, medisch advies inwinnen.
🖐️ Skin Contact
Verontreinigde kleding uitdoen. Blootgestelde lichaamsdelen met water afspoelen en daarna wassen met zeep, indien beschikbaar. Bij blijvende irritatie medische hulp inroepen.
Symptoms:
Tot de verschijnselen en symptomen van olieacne en folliculitis kan behoren de vorming van zwarte puistjes en vlekken op de huid van de blootgestelde lichaamsdelen.
👁️ Eye Contact
Spoel het oog uit met grote hoeveelheden water. Contactlenzen verwijderen, indien mogelijk. Blijven spoelen. Bij blijvende irritatie medische hulp inroepen.
🍽️ Ingestion/Swallowing
In het algemeen is behandeling niet noodzakelijk. Zijn er echter zeer grote hoeveelheden ingeslikt, dan dient men medisch advies in te winnen.
Symptoms:
Opname in het lichaam kan leiden tot misselijkheid, braken en/of diarree.
🚨 Immediate Medical Attention Required
Indien symptomen aanhouden, medisch advies inwinnen (inhalation). Bij blijvende irritatie medische hulp inroepen (skin, eyes). Zijn er echter zeer grote hoeveelheden ingeslikt, dan dient men medisch advies in te winnen (ingestion).
Medical Treatment
Opmerkingen voor de arts: Behandel symptomatisch.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
The level of protection and the type of measures required depend on the potential exposure conditions. Choose the type of measures based on the risk assessment under local conditions. Suitable measures include: Adequate ventilation to control airborne concentrations. If material is heated or sprayed or if mist forms, the likelihood of airborne concentrations being generated is higher.
🧤 Hand Protection
If hand contact with the product may occur, the use of gloves conforming to relevant standards (in Europe: EN374, in the US: F739) can provide sufficient chemical protection if they are made of the following materials: PVC, neoprene, or nitrile rubber gloves. The suitability and durability of a glove depend on its use, e.g., the number of contacts and the duration of contact, and the degree of chemical resistance of the glove material, and skill. Always ask for advice from glove suppliers. Contaminated gloves should be replaced. Personal hygiene is very important for effective hand care. Wear gloves only over clean hands. After using gloves, hands should be thoroughly washed and dried. The use of unscented moisturizing cream is recommended. For continuous contact, we recommend gloves with a breakthrough time of more than 240 minutes, with a preference for more than 480 minutes in cases where suitable gloves can be identified. For short-term or splash protection, we recommend the same, but are aware that suitable gloves offering this level of protection may not be available, and in that case, a shorter breakthrough time may be acceptable as long as applicable maintenance and timely replacement procedures are followed. The thickness of the gloves is not a good measure of the gloves' resistance to a chemical, as this depends on the exact composition of the material from which the gloves are made. The thickness of the gloves should generally be greater than 0.35 mm, depending on the model and material of the gloves.
👁️ Eye Protection
If the material is handled in such a way that it could splash into the eyes, protective eye protection is recommended. Approved according to EU standard EN166.
😷 Respiratory Protection
Under normal conditions of use, respiratory protection is usually not required. In accordance with good industrial hygiene practices, precautions should be taken to prevent inhalation of the material. When engineering controls cannot maintain airborne concentrations at an adequate level to protect worker health, select respiratory protective equipment suitable for the specific conditions of use and complying with relevant legislation. Check suitability with the supplier of respiratory protective equipment. If air-purifying respiratory protection is possible, select a suitable mask and filter combination. Select a combination filter suitable for particles/organic gases and vapors [Type A/Type P boiling point > 65C (149F)] that complies with EN14387 and EN143.
🦺 Skin/Body Protection
Usually no further skin protection than standard work clothing is required. It is advisable to wear chemical-resistant gloves.
🌍 Environmental Exposure Controls
Take appropriate measures to comply with environmental protection legislation requirements. Prevent environmental contamination by following the advice in Section 6. If necessary, prevent the discharge of (un)dissolved material into wastewater. Wastewater must be treated in municipal or industrial wastewater treatment plants before being discharged into surface water. Local guidelines for emission limits for volatile substances must be observed when exhaust gases containing vapors are released.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for Shell Turbo Oil T 68?
The signal word for this substance is "no signal word".
What is the physical form of Shell Turbo Oil T 68?
Shell Turbo Oil T 68 is a vloeibaar bij kamertemperatuur. appearing as vloeibaar bij kamertemperatuur. with kleurloos tot geelachtig color.
What is Shell Turbo Oil T 68 used for?
Turbineolie.
What is the melting point of Shell Turbo Oil T 68?
The melting point is Geen gegevens beschikbaar and the boiling point is > 280 CGeschatte waarde(n).