Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Unique Formula Identifier - for poison centres and emergency response
Uses Information
Overview
LOCTITE 518 commonly used anaerobic adhesive.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS07
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H412: Harmful to aquatic life with long lasting effects.
Precautionary Statements
- P273: Avoid release to the environment.
- P280: Wear protective gloves.
- P302+P352: IF ON SKIN: Wash with plenty of soap and water.
- P333+P313: If skin irritation or rash occurs: Get medical advice/attention.
- P337+P313: If eye irritation persists: Get medical advice/attention.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
Henkel Ltd
manufacturer
Wood Lane End, HP2 4RQ, Hemel Hempstead, Great Britain
GB
+44 (1442) 278000
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Emergency Contact
+44 (0)1442 278497
GB
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
mixtureChemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 3-Phenoxy-2-hydroxypropyl methacrylate EC: 240-994-5 | 16926-87-7 | 10-20% | ⚠️ Hazardous |
| 3,3,5 Trimethylcyclohexyl methacrylate EC: 231-927-0 | 7779-31-9 | 5-10% | ⚠️ Hazardous |
| 2-Hydroxyethyl methacrylate EC: 212-782-2 | 868-77-9 | 5-10% | ⚠️ Hazardous |
| Methacryloyloxyethyl succinate EC: 244-096-4 | 20882-04-6 | 0.1-1% | ⚠️ Hazardous |
| Acetic acid, 2-phenylhydrazide EC: 204-055-3 | 114-83-0 | 0.1-1% | ⚠️ Hazardous |
| methacrylic acid EC: 201-204-4 | 79-41-4 | 0.1-1% | ⚠️ Hazardous |
| 2-Carboxyethyl acrylate EC: 246-359-9 | 24615-84-7 | 0.1-1% | ⚠️ Hazardous |
| Acrylic acid EC: 201-177-9 | 79-10-7 | 0.1-1% | ⚠️ Hazardous |
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Move to fresh air. If symptoms persist, seek medical advice.
🖐️ Skin Contact
Rinse with running water and soap. Obtain medical attention if irritation persists.
Symptoms:
Rash, Urticaria. Redness, inflammation.
👁️ Eye Contact
Rinse immediately with plenty of running water (for 10 minutes), seek medical attention from a specialist.
Symptoms:
Irritation, conjunctivitis.
🍽️ Ingestion/Swallowing
Rinse mouth, drink 1-2 glasses of water, do not induce vomiting, consult a doctor.
Fire Fighting Measures & Emergency Response
Fire suppression methods, extinguishing media, and firefighting safety procedures
✅ Suitable Extinguishing Media
water, carbon dioxide, foam, powder
❌ Unsuitable Extinguishing Media
High pressure waterjet
⚠️ Specific Fire Hazards
In the event of a fire, carbon monoxide (CO), carbon dioxide (CO2) and nitrogen oxides (NOx) can be released.
🔥 Fire Fighting Instructions
In case of fire, keep containers cool with water spray.
🛡️ Firefighter Protection Equipment
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures & Spill Response
Emergency spill cleanup procedures, containment methods, and environmental protection
💧 Small Spill Procedures
For small spills wipe up with paper towel and place in container for disposal.
🌊 Large Spill Procedures
For large spills absorb onto inert absorbent material and place in sealed container for disposal.
🌍 Environmental Precautions
Do not empty into drains / surface water / ground water.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Safe Handling & Storage Procedures
Industrial handling precautions, storage conditions, and workplace safety requirements
⚠️ Handling Precautions
• Avoid skin and eye contact.
• See advice in section 8.
• Wash hands before work breaks and after finishing work.
• Do not eat, drink or smoke while working.
• Good industrial hygiene practices should be observed.
🏪 Storage Conditions
• Keep container tightly sealed.
🧼 General Hygiene Measures
Wash hands before work breaks and after finishing work. Do not eat, drink or smoke while working. Good industrial hygiene practices should be observed.
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Ensure good ventilation/extraction.
🧤 Hand Protection
Chemical-resistant protective gloves (EN 374). Suitable materials for short-term contact or splashes (recommended: at least protection index 2, corresponding to > 30 minutes permeation time as per EN 374): nitrile rubber (NBR; >= 0.4 mm thickness). Suitable materials for longer, direct contact (recommended: protection index 6, corresponding to > 480 minutes permeation time as per EN 374): nitrile rubber (NBR; >= 0.4 mm thickness). Gloves should be replaced if signs of wear and tear are noticed.
👁️ Eye Protection
Safety glasses with sideshields or chemical safety goggles should be worn if there is a risk of splashing. Protective eye equipment should conform to EN166.
😷 Respiratory Protection
Ensure adequate ventilation. An approved mask or respirator fitted with an organic vapour cartridge should be worn if the product is used in a poorly ventilated area. Filter type: A (EN 14387).
🦺 Skin/Body Protection
Wear suitable protective clothing. Protective clothing should conform to EN 14605 for liquid splashes or to EN 13982 for dusts.
Chemical Stability & Reactivity Data
Chemical stability, hazardous reactions, and incompatible materials information
✅ Chemical Stability
Stable under recommended storage conditions.
⚗️ Reactivity
Reacts with strong oxidants. Acids. Reducing agents. Strong bases.
⚠️ Hazardous Reactions
See section reactivity
🚫 Conditions to Avoid
Stable under normal conditions of storage and use.
🧪 Incompatible Materials
See section reactivity.
💨 Hazardous Decomposition Products
carbon oxides. Hydrocarbons nitrogen oxides. Rapid polymerisation may generate excessive heat and pressure.
Ecological Information & Environmental Impact
Environmental toxicity, biodegradation, bioaccumulation, and ecological effects data
🌱 Toxicity
🌱 Persistence and degradability
🌱 Bioaccumulative potential
🌱 Mobility in soil
🌱 Results of PBT and vPvB assessment
🌱 Endocrine disrupting properties
🌱 Other adverse effects
Waste Disposal & Treatment Methods
Waste disposal procedures, treatment methods, and regulatory compliance requirements
♻️ Waste Treatment Methods
Dispose of in accordance with local and national regulations.
🗂️ Product Disposal Recommendations
Do not empty into drains / surface water / ground water.
🏷️ Waste Classification Codes
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
📦 Proper Shipping Name
Not hazardous according to RID, ADR, ADN, IMDG, IATA-DGR.
⚠️ Transport Hazard Class
Not hazardous according to RID, ADR, ADN, IMDG, IATA-DGR.
📋 Packing Group
Not hazardous according to RID, ADR, ADN, IMDG, IATA-DGR.
Regulatory Information & Compliance
Chemical regulations, safety assessments, and regulatory compliance status
📋 Regulatory Summary
This Safety Data Sheet has been produced for sales from Henkel to parties purchasing from Henkel, is based on Regulation (EC) No 1907/2006 and provides information in accordance with applicable regulations of the European Union only.
❌ Chemical Safety Assessment
No chemical safety assessment has been performed for this substance.
ℹ️ Additional Regulatory Information
When exporting to territories other than the European Union, please consult with the respective Safety Data Sheet of the concerned territory to ensure compliance or liaise with Henkel's Product Safety and Regulatory Affairs Department ([email protected]) prior to export to other territories than the European Union.
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for LOCTITE 518?
The signal word for this substance is "warning".
What is the physical form of LOCTITE 518?
LOCTITE 518 is a liquid with red color. It has acrylic odor.
What is the solubility of LOCTITE 518?
Slight
What is LOCTITE 518 used for?
Anaerobic Adhesive
What are the hazard statements for LOCTITE 518?
This substance has 4 hazard statements: H315: Causes skin irritation. H317: May cause an allergic skin reaction. H319: Causes serious eye irritation. H412: Harmful to aquatic life with long lasting effects.
What is the melting point of LOCTITE 518?
The melting point is Not applicable, Product is a liquid and the boiling point is >150 °℃ (> 302 °F); Boiling point.