NextSDS Logo
Safety Data Sheet EN

NONRUSTER P377

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
NONRUSTER P377
Product Code
GB151458

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Rust preventative agent

Manufacturers & Suppliers

Y

YUSHIRO CHEMICAL INDUSTRY CO., LTD

manufacturer

34-16, 2-CHOME, CHIDORI, OHTA-KU, TOKYO, JAPAN 146-8510

Emergency Contacts

YUSHIRO CHEMICAL INDUSTRY CO., LTD

+81-467-75-0175

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 4
Acute Tox. Cat. 4
Eye Irrit. Cat. 2B
Muta. Cat. 2
Repr. Cat. 1A
STOT RE Cat. 2
Asp. Tox. Cat. 1
Aquatic Acute Cat. 3
Aquatic Chronic Cat. 3

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H227 Combustible liquid
H304 May be fatal if swallowed and entered in airways
H320 Causes eye Irritation
H332 Harmful if inhaled
H341 Suspected of causing genetic defects
H360 May damage fertility or the unborn child
H373 May cause damage to airways, nervous system, systematic toxicity, lung, skin through prolonged or repeated exposure
H412 Harmful to aquatic life with long lasting effects

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P210 Keep away from heat/sparks/open flames/hot surfaces. — No smoking.
P260 Do not breathe mist/vapors/spray.
P261 Avoid breathing mist/vapors/spray.
P264 Wash hands, eyes thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P273 Avoid release to the environment.
P280 Wear protective gloves/eye protection/face protection.
P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Call a POISON CENTER/ doctor.
P312 IF inhaled, IF you feel unwell: Call a POISON CENTER or doctor/physician.
P314 Get medical advice/attentions if you feel unwell.
P331 Do not induce vomiting.
P337 + P313 If eye irritation persists: Get medical advice/attention.
P370 + P378 In case of fire, use appropriate extinguisher for extinction.
P403 + P235 Store in a well-ventilated place. Keep cool.
P405 Store locked up.
P501 Dispose of contents/container to in accordance with local regional/national/international regulation.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Private in each component --- --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

The data for this section has not been processed yet.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Carbon dioxide, dry chemical powder, foam

Unsuitable media

Direct running water

Specific hazards

Irritating/Toxic/corrosive gases may form upon combustion.

Instructions

Remove a container from fire area if not dangerous. Cool a container with plenty of water. Firefighters will use unattended hose holders and nozzles with monitor and fight from farthest distance. Choose suitable fire extinguisher with accordance with a situation. Do not add water into a container. If surrounding fire, immediately remove a container to safe place, if safe to do so.

Firefighter Protection

Firefighters should wear appropriate breathing equipment and chemical protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Stay upwind. Away from the lowlands. Immediately seclude as leak area by taking appropriate distance in all direction. Do not contact a broken container or spillage without appropriate protective clothing.

Small spill

If small quantity, absorb with drying soil, sand or noncombustible matter, or, collect into a seal-up container to dump. If small quantity, cover with drying soil, sand and non-combustible matter and cover with plastic sheet to avoid drift and rain.

Large spill

If large quantity, surround with bank of earth and collect spillage.

Environmental

Do not release into environment.

Cleanup methods

Absorb with drying soil, sand or noncombustible matter. Or collect into container. Solidify substance to collect by scratch.

Materials: drying soil, sand or noncombustible matter

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Get rid of all ignition source (smoking, sparks, open flame in surrounding place). Prevent flowing into drain, sewerage, basement and closed space. Keep fire away. Keep away from ignition source such as static electricity, sparks, high temperature surface. Avoid skin and eye contact and inhalation. Wear protective equipment. Do not handle until safety precautions have been read and understood.

Storage

Store in place with enough equipment of daylighting, lighting and ventilation to store dangerous substance safely. Floor should be designed to avoid infiltrating water. Floor should be designed to avoid dangerous substance infiltrating. Also it should be with appropriate slope and equipped with retaining bath. Avoid direct daylight. Store in cool and well-ventilated place. Keep container tightly closed. Store lock-up. Store in container prescribed in fire laws and UN transportation regulations. Store in closed and secure container.

Hygiene

Do not eat or smoke while handling this product. Wash hands thoroughly after handling. Do not swallow. Avoid skin contact. Do not breathe gas. Do not breathe mist, fume and spray. Avoid eye contact. Do not contact, breathe and swallow.

Fire prevention

Get rid of all ignition source (smoking, sparks, open flame in surrounding place). Keep fire away. Keep away from ignition source such as static electricity, sparks, high temperature surface. Keep away from ignition source such as static electricity, sparks, open flame.-Non-smoking.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Handle in place with general ventilation.

Hands

Wear personal hand protective if necessary.

Eyes

Wear personal eye protective. Wear protective glasses (General type, glasses with side guard, goggle). If spills or mist, wear coverall chemical splash goggle or face shield.

Respiratory

Wear personal breathing protective if necessary. Wear appropriate breathing protective. If possibly exposed, wear air-supplied respirator, air respirator or oxygen respirator.

Skin/Body

Wear personal clothing and mask.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Solubility In Water
Insoluble
Colour Intensity
---
Kinematic Viscosity
14mm²/s, 40°C
Voc Content
---
Relative Density
---
Colour
Brown
Upper Explosive Limit
---
State Under Standard Conditions
---
Physical State
Liquid
Appearance
---
Solubility
Insoluble in water
Lower Explosive Limit
---
Properties Status
---
Partition Coefficient
---
Vapor Pressure
---
Ph
---
Flammability
---
Physical State Data
liquid
Molecular Weight
---
Relative Evaporation Rate
---
Odor
Specific
Evaporation Rate
---
Auto Ignition Temperature
---
Cloud Point
---
Boiling Point
---
Freezing Point
---
Decomposition Temperature
---
Form
Liquid
Crystallisation Point
---
Solidification Point
---
Dynamic Viscosity
---
Bulk Density
---
Metal Corrosion
---
Softening Point
---
Density
0.87g/cm³, 15°C
Odor Threshold
---
Vapor Density
---
Solubility In Fat
---
Melting Point
less than 0°C
Explosive Limits
---
Flash Point
76°C (TCC)
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

This product is considered a stable material under normal.

Hazardous reactions

Contacting with strong oxidant may cause fire or explosion by severe reaction.

Avoid

High temperature surface, sparks, open flame, static electric spark.

Incompatible

Strong oxidant

Decomposition

Toxic gases (COx, SOx) will form upon combustion.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Before disposal, detoxify/stabilize/mediate as much as possible.

Disposal

Waste material may be disposed of under conditioning which meets Federal, State and Local environmental control regulations. If an approved industrial waste disposer or local government legally handle the waste, entrust the disposal. If outsourcing disposal, inform dangerousness and hazards of the waste well.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

ADR

Make sure no leakage or its risk. Prevent falling, dropping and damage when loading up. Handle in accordance with precautions on storage as written and also regulation/laws.

IMDG

Make sure no leakage or its risk. Prevent falling, dropping and damage when loading up. Handle in accordance with precautions on storage as written and also regulation/laws.

IATA

Make sure no leakage or its risk. Prevent falling, dropping and damage when loading up. Handle in accordance with precautions on storage as written and also regulation/laws.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for NONRUSTER P377?

The signal word is danger.

What is the physical form of NONRUSTER P377?

NONRUSTER P377 is a liquid with brown color. It has specific odor.

What is the solubility of NONRUSTER P377?

Insoluble in water

What is NONRUSTER P377 used for?

Rust preventative agent

What are the hazard statements for NONRUSTER P377?

This substance has 8 hazard statements:

  • H227: Combustible liquid
  • H304: May be fatal if swallowed and entered in airways
  • H320: Causes eye Irritation
  • H332: Harmful if inhaled
  • H341: Suspected of causing genetic defects
  • H360: May damage fertility or the unborn child
  • H373: May cause damage to airways, nervous system, systematic toxicity, lung, skin through prolonged or repeated exposure
  • H412: Harmful to aquatic life with long lasting effects

What is the melting point of NONRUSTER P377?

The melting point is less than 0°C .