NextSDS Logo
RE

RED HOT BLUE GLUE

DANGER liquid SDS/MSDS

Chemical Product Identification & Regulatory Data

Official chemical identifiers, CAS numbers, and regulatory compliance information

Basic Product Information

Product Name
RED HOT BLUE GLUE
Product Form
Medium Body

Regulatory Identifiers

CAS Number
N/A

Chemical Abstracts Service registry number - unique identifier for chemical substances

Uses Information

Identified Uses
PVC solvent cement, adhesive

Overview

RED HOT BLUE GLUE is a liquid substance commonly used pvc solvent cement, adhesive.

Manage Your Safety Data Sheets

Organize and access your chemical safety data with ease.

GHS Hazard Classification & Safety Warnings

Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications

Classification Status

Classified

Signal Word

danger

Hazard Classifications

Acute Tox. Category 4 H302
Skin Irr. Category 2 H315
Eye Irrit. Category 2 H319
Carc. Category 2 H351
STOT SE Category 3 H335
Flam. Liq. Category 2 H225

GHS Hazard Pictograms & Safety Symbols

GHS02 GHS Hazard Pictogram: Flammable hazard - Fire risk materials including gases, liquids, and solids

GHS02

GHS07 GHS Hazard Pictogram: Health hazard warning - Materials harmful to health including irritants and sensitizers

GHS07

GHS08 GHS Hazard Pictogram: Serious health hazard - Carcinogenic, mutagenic, or toxic to organs

GHS08

GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions

Hazard Statements

  • H225: Highly flammable liquid and vapor.
  • H302: Harmful if swallowed.
  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.
  • H335: May cause respiratory irritation.
  • H351: Suspected of causing cancer.

Precautionary Statements

  • P101: If medical advice is needed, have product container or label at hand.
  • P102: Keep out of reach of children.
  • P201: Obtain special instructions before use.
  • P210: Keep away from heat/sparks/open flames/hot surfaces. No smoking.
  • P240: Ground/bond container and receiving equipment.
  • P241: Use explosion-proof electrical/ventilating/lighting equipment.
  • P242: Use only non-sparking tools.
  • P243: Take precautionary measures against static discharge.
  • P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
  • P270: Do not eat, drink or smoke when using this product.
  • P271: Use only outdoors or in a well-ventilated area.
  • P280: Wear protective gloves/eye protection/face protection.
  • P301+P312: If swallowed: Call a poison center/doctor if you feel unwell.
  • P302+P352: If on skin: Wash with plenty of water.
  • P303+P361+P353: If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/ shower.
  • P304+P340: If inhaled: Remove person to fresh air and keep comfortable for breathing.
  • P305+P351+P338: If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P312: Call a poison center/doctor if you feel unwell.
  • P321: Specific treatment (see on this label).
  • P330: Rinse mouth.
  • P362: Take off contaminated clothing and wash it before reuse.
  • P370+P378: In case of fire: Use sand, carbon dioxide or powder extinguisher to extinguish.
  • P403+P233: Store in a well-ventilated place. Keep container tightly closed.
  • P403+P235: Store in a well-ventilated place. Keep cool.
  • P405: Store locked up.
  • P501: Dispose of contents/container to industrial combustion plant.

Chemical Manufacturers & Supply Chain

Authorized suppliers, manufacturers, and distribution network information

T Christy Enterprises, Inc. company logo - Safety Data Sheet supplier organization

T Christy Enterprises, Inc.

national supplier

πŸ“

655 East Ball Road Anaheim CA 92805

🌍

US

πŸ“ž

714-507-3300

🌐 tchristy.com

24/7 Emergency Response & Poison Control

Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies

CHEMTEL

πŸ“ž

(800) 255-3924

🌍

US

πŸ•’

24 Hours

CHEMTEL

πŸ“ž

(813) 248-0585

🌍

US

πŸ•’

24 Hours

πŸ’‘

International

Chemical Composition & Hazardous Ingredients

Detailed component analysis, concentration ranges, and hazardous substance identification

Product Type

mixture

General Composition

Description of the mixture

Chemical Components & Hazardous Substances

Chemical Name CAS Number Concentration Hazardous
tetrahydrofuran 109-99-9 50-75% ⚠️ Hazardous
cyclohexanone 108-94-1 10-25% ⚠️ Hazardous
methyl ethyl ketone 78-93-3 5-10% ⚠️ Hazardous

Emergency First Aid Measures

Critical first aid procedures for chemical exposure incidents and medical emergencies

🫁 Inhalation Exposure

If breathing is irregular or stopped, immediately seek medical assistance and start first aid actions. In case of respiratory tract irritation, consult a physician. Provide fresh air.

πŸ–οΈ Skin Contact

Wash with plenty of soap and water.

πŸ‘οΈ Eye Contact

Remove contact lenses, if present and easy to do. Continue rinsing. Irrigate copiously with clean, fresh water for at least 10 minutes, holding the eyelids apart.

🍽️ Ingestion/Swallowing

Rinse mouth with water (only if the person is conscious). Do NOT induce vomiting.

Related Chemical Substances & Alternative Products

Similar chemicals with comparable safety profiles and industrial applications

Technical Specifications & Material Properties

Physical state, chemical properties, melting point, boiling point, and material characteristics

πŸ§ͺ Physical State
liquid
Critical Property
πŸ“Š Physical State Data
liquid
πŸ“Š State Under Standard Conditions
Not available
πŸ‘οΈ Appearance
liquid
🎨 Colour
blue
πŸ“Š Colour Intensity
Not available
πŸ“Š Form
Not available
πŸ‘ƒ Odor
characteristic
πŸ“Š Odor Threshold
Not available
πŸ§ͺ Ph
not determined
🧊 Melting Point
not determined
Critical Property
πŸ’¨ Boiling Point
65 ℃ at 101.3 kPa
Critical Property
πŸ”₯ Flash Point
-21.2 °℃ at 101.3 kPa
Critical Property
πŸ“Š Freezing Point
not determined
πŸ“Š Softening Point
Not available
πŸ“Š Solidification Point
Not available
πŸ“Š Cloud Point
Not available
πŸ“Š Crystallisation Point
Not available
πŸ“Š Relative Evaporation Rate
Not available
πŸ’¨ Evaporation Rate
not determined
πŸ’¨ Vapor Pressure
17 kPa at 20 ℃
πŸ“Š Vapor Density
this information is not available
πŸ“Š Relative Density
Not available
πŸ“Š Bulk Density
Not available
βš–οΈ Density
0.944 9/cm3 at 73 ΒΊF
Critical Property
πŸ”₯ Flammability
not relevant, (fluid)
πŸ“Š Upper Explosive Limit
Not available
πŸ“Š Lower Explosive Limit
Not available
πŸ“Š Explosive Limits
Not available
πŸ“Š Auto Ignition Temperature
215 °℃ (auto-ignition temperature (liquids and gases)
πŸ“Š Decomposition Temperature
Not available
πŸ’§ Solubility
not determined
πŸ“Š Partition Coefficient
this information is not available
πŸ“Š Solubility In Water
Not available
πŸ“Š Solubility In Fat
Not available
πŸ“Š Molecular Weight
Not available
πŸ“Š Voc Content
When applied as directed, per SCAQMD Rule 1168, Test Method 316A, VOC content is: <= 510 g/L
πŸ“Š Metal Corrosion
Not available
πŸ“Š Dynamic Viscosity
500 - 700 cP at 73 ΒΊF
πŸ“Š Kinematic Viscosity
Not available
πŸ“Š Properties Status
Not available

Exposure Controls & Personal Protective Equipment (PPE)

Occupational exposure limits, engineering controls, and required safety equipment

🏭 Engineering Controls

General ventilation.

🧀 Hand Protection

Wear suitable gloves. Chemical protection gloves are suitable, which are tested according to EN 374. Check leak-tightness/impermeability prior to use. In the case of wanting to use the gloves again, clean them before taking off and air them well. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves.

πŸ‘οΈ Eye Protection

Wear eye/face protection.

😷 Respiratory Protection

In case of inadequate ventilation wear respiratory protection.

🌍 Environmental Exposure Controls

Use appropriate container to avoid environmental contamination. Keep away from drains, surface and ground water.

Transportation & Shipping Information

UN numbers, shipping names, transport classes, and regulatory transport requirements

🏷️ UN Number

UN 1133

πŸ“¦ Proper Shipping Name

Adhesives

⚠️ Transport Hazard Class

3

πŸ“‹ Packing Group

II

Chemical Safety FAQ & Common Questions

Most frequently asked questions about safety, handling, storage, and regulatory compliance

What is the hazard signal word for RED HOT BLUE GLUE?

The signal word for this substance is "danger".

What is the physical form of RED HOT BLUE GLUE?

RED HOT BLUE GLUE is a liquid appearing as liquid with blue color. It has characteristic odor.

What is the solubility of RED HOT BLUE GLUE?

not determined

What is RED HOT BLUE GLUE used for?

PVC solvent cement, adhesive

What are the hazard statements for RED HOT BLUE GLUE?

This substance has 6 hazard statements: H225: Highly flammable liquid and vapor. H302: Harmful if swallowed. H315: Causes skin irritation. H319: Causes serious eye irritation. H335: May cause respiratory irritation. H351: Suspected of causing cancer.

What is the melting point of RED HOT BLUE GLUE?

The melting point is not determined and the boiling point is 65 ℃ at 101.3 kPa.