Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
epple 200/S toluene free is a liquid substance commonly used adhesive for the gluing of most diverse substrates..
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS02
GHS07
GHS09
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H225: Highly flammable liquid and vapour.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
- H411: Toxic to aquatic life with long lasting effects.
Precautionary Statements
- P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P261: Avoid breathing vapours.
- P271: Use only outdoors or in a well-ventilated area.
- P273: Avoid release to the environment.
- P280: Wear protective gloves.
- P501: Dispose of contents/container in accordance with local/regional/ national/international regulations.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
E. Epple & Co. GmbH
manufacturer
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Information center against poisoning Bonn
+49 (0) 228 / 19 240
DE
Languages: DE
Advice in German
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
mixtureGeneral Composition
polychloroprene solution
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ethyl acetate EC: 205-500-4 | 141-78-6 | 24.9-49.9% | ⚠️ Hazardous |
| Hydrocarbons, C7, n-alkanes, isoalkanes, cyclics EC: 927-510-4 | N/A | 24.9-49.9% | ⚠️ Hazardous |
| 2,2-methylenebis(6-T-butyl-4-methylphenol) EC: 204-327-1 | 119-47-1 | 0.1-0.9% | ⚠️ Hazardous |
Additional Information
Full text of classification: see section 16
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Remove casualty to fresh air and keep warm and at rest. In case of irregular breathing or respiratory arrest provide artificial respiration.
🖐️ Skin Contact
Take off immediately all contaminated clothing. After contact with skin, wash immediately with plenty of water and soap.
👁️ Eye Contact
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical advice immediately.
🍽️ Ingestion/Swallowing
If swallowed, rinse mouth with water (only if the person is conscious). Seek medical advice immediately. Keep victim calm. Do NOT induce vomiting.
🚨 Immediate Medical Attention Required
First Aid, decontamination, treatment of symptoms.
Medical Treatment
First Aid, decontamination, treatment of symptoms.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Provide good ventilation. This can be achieved with local or room suction. If this should not be sufficient to keep aerosol and solvent vapour concentration below the exposure limit values, a suitable respiratory protection must be used.
🧤 Hand Protection
For prolonged or repeated handling the following glove material must be used: NBR (Nitrile rubber) Thickness of the glove material > 0,4 mm ; Breakthrough time: > 480 min. Observe the instructions and details for use, storage, maintenance and replacement provided by the protective glove manufacturer. Penetration time of glove material depending on intensity and duration of exposure to skin. Recommended glove articles EN ISO 374 Barrier creams can help protecting exposed skin areas. In no case should they be used after contact.
👁️ Eye Protection
Wear closely fitting protective glasses in case of splashes.
😷 Respiratory Protection
If concentration of solvents is beyond the occupational exposure limit values, approved and suitable respiratory protection must be used. Observe the wear time limits according GefStoffV in combination with the rules for using respiratory protection apparatus (BGR 190). Use only respiratory protection equipment with CE-symbol including four digit test number.Recommendation: Half-face mask Filter type: ABEK-P2
🦺 Skin/Body Protection
Wear antistatic clothing of natural fibers (cotton) or heat resistant synthetic fibers.
🌍 Environmental Exposure Controls
Do not allow to enter into surface water or drains. See section 7. No additional measures necessary.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
1133
📦 Proper Shipping Name
Adhesives
⚠️ Transport Hazard Class
3
📋 Packing Group
III
🚛 ADR Transport Precautions
Transport always in closed, upright and safe containers. Make sure that persons transporting the product know what to do in case of an accident or leakage. Advices on safe handling: see parts 6 - 8
🚢 IMDG Maritime Transport Precautions
Transport always in closed, upright and safe containers. Make sure that persons transporting the product know what to do in case of an accident or leakage. Advices on safe handling: see parts 6 - 8
✈️ IATA Air Transport Precautions
Transport always in closed, upright and safe containers. Make sure that persons transporting the product know what to do in case of an accident or leakage. Advices on safe handling: see parts 6 - 8
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for epple 200/S toluene free?
The signal word for this substance is "danger".
What is the physical form of epple 200/S toluene free?
epple 200/S toluene free is a liquid appearing as liquid with yellow color. It has like solvents odor.
What is the solubility of epple 200/S toluene free?
Water solubility at 20 C: insoluble
What is epple 200/S toluene free used for?
Adhesive for the gluing of most diverse substrates.
What are the hazard statements for epple 200/S toluene free?
This substance has 5 hazard statements: H225: Highly flammable liquid and vapour. H315: Causes skin irritation. H319: Causes serious eye irritation. H336: May cause drowsiness or dizziness. H411: Toxic to aquatic life with long lasting effects.
What is the melting point of epple 200/S toluene free?
The melting point is -83 C and the boiling point is 77 C.