Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Kilfrost Cooltrans Plus CTL
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Heat transfer fluid. Restricted to professional users.
Uses advised against
None known.
Manufacturers & Suppliers
Kilfrost Limited
manufacturer
Albion Works, Haltwhistle, NE49 OHJ Northumberland, ENGLAND
+44 (01434) 320332
Emergency Contacts
NHS
111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Monopropylene Glycol EC: 200-338-0 | 57-55-6 | 60 - 100% | No |
According to REACH Regulation (EC) No 1907/2006, as retained and amended SI 2019/758 and SI 2020/1577
Notes
See full text of H-phrases in section 16. Occupational exposure limits are listed in section 8, if these are available.
First Aid Measures
Emergency procedures for chemical exposure incidents
In case of discomfort: bring the person into fresh air.
Upon irritation: rinse with water. In the event of continued irritation, seek medical assistance.
Symptoms: irritation
If in eyes: Flush eyes with plenty of water or salt water (20-30 °C) and continue until irritation stops. Remove contact lenses.
Rinse and flush mouth thoroughly and consume large quantities of water. In case of continued discomfort: seek medical assistance and bring this safety data sheet.
Immediate Medical Attention
Contact a doctor or casualty department
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol-resistant foam, carbon dioxide, powder, water mist.
Waterjets should not be used, since they can spread the fire.
Fire will result in dense smoke. Exposure to combustion products may harm your health. Closed containers, which are exposed to fire, should be cooled with water.
Closed containers, which are exposed to fire, should be cooled with water.
Firefighter Protection
Fire fighters should wear appropriate personal protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep unauthorized persons away from the spill. Contaminated areas may be slippery.
Avoid discharge to lakes, streams, sewers, etc.
Contain and collect spillage. Wherever possible cleaning should be performed with normal cleaning agents. Avoid use of solvents.
Materials: non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth
Related Products
Similar products with comparable safety profiles
Kilfrost K400
---
Provifrost KF ECO
CAS: 590-29-4
Miracold Plus
---
WOLF COOLANT G12+ LL -36°C
UFI: CU5E-YH73-EN4K-T6M1
UltraCool
---
TYFOCOR® G-LS –ready-to-use, frost protection –28 °C
---
-40°C Acwel Organic Acid Coolant
---
MPM Coolant Premium Longlife -40°C G13 Ready to Use
UFI: QSKQ-5GAP-320Q-7KES
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
See section 8 "Exposure controls/personal protection" for information on personal protection.
Store in tightly closed, original container in a dry, cool and well ventilated place.
Smoking, drinking and consumption of food is not allowed in the work area.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Apply standard precautions during use of the product. Avoid inhalation of vapours.
Material: Nitrile, Glove thickness: 0,2 mm, Breakthrough time: > 240 min, Standards: EN374-2, EN374-3, EN388
Type: Face shield alternatively safety glasses with side shields, Standards: EN166
Respiratory protection is not needed in the event of adequate ventilation.
Dedicated work clothing should be worn. Wear a protective suit in the event of prolonged periods of work with the product.
No specific requirements.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable under the conditions, noted in section 7 "Handling and storage".
No data available.
None known.
None known.
Strong oxidizing agents
The product is not degraded when used as specified in section 1.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. ▼ Toxicity
12.2. ▼ Persistence and degradability
Based on available data, the classification criteria are not met.
12.3. ▼ Bioaccumulative potential
Based on available data, the classification criteria are not met.
12.4. ▼ Mobility in soil
No data available.
12.5. Results of PBT and vPvB assessment
The mixture does not contain any substances known to fulfil the criteria for PBT and vPvB classification.
12.6. Endocrine disrupting properties
The mixture does not contain any substances considered to have endocrine-disrupting properties in relation to the environment.
12.7. Other adverse effects
No other adverse effects are known.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Product is not covered by regulations on dangerous waste.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Kilfrost Cooltrans Plus CTL?
The signal word is no signal word.
What is the physical form of Kilfrost Cooltrans Plus CTL?
Kilfrost Cooltrans Plus CTL is a liquid with clear color.
What is the solubility of Kilfrost Cooltrans Plus CTL?
Completely soluble
What is Kilfrost Cooltrans Plus CTL used for?
Heat transfer fluid. Restricted to professional users.
What is the melting point of Kilfrost Cooltrans Plus CTL?
The melting point is Testing not relevant or not possible due to the nature of the product. and the boiling point is ~151 @ 1013 mbar.