Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
Kalteinbettmittel Epoclear 2000 (Harz) commonly used epoxy binder.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS07
GHS09
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H411: Toxic to aquatic life with long lasting effects.
Precautionary Statements
- P261: Avoid breathing dust/fume/gas/mist/vapours/spray.
- P273: Avoid release to the environment.
- P280: Wear protective gloves/protective clothing/eye protection/face protection.
- P302+P352: IF ON SKIN: Wash with plenty of water.
- P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P337+P313: If eye irritation persists: Get medical advice/attention.
- P391: Collect spillage.
- P501: Dispose of contents/container to local/regional/national/international regulations.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
Schmitz-Metallographie GmbH
national supplier
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Emergency Contact
02407 / 568296-0
DE
Mo-Fr 9:00 - 16:00
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
mixtureGeneral Composition
Epoxy resin formulation based on bisphenol A liquid resin and bisphenol F liquid resin
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| epoxy resin (number average molecular weight <= 700), reaction product: bisphenol-A-(epichlorhydrin) EC: 500-033-5 | 25068-38-6 | 50-100% | ⚠️ Hazardous |
| Formaldehyde, oligomeric reaction products with 1-chloro-2,3-epoxypropane and phenol EC: 500-006-8 | 9003-36-5 | 10-25% | ⚠️ Hazardous |
| 1,6-bis(2,3-epoxypropoxy)hexane EC: 240-260-4 | 16096-31-4 | 10-25% | ⚠️ Hazardous |
Composition Notes
Product does not contain listed SVHC substances > 0,1 % according to Regulation (EC) No. 1907/2006 Article 59 (REACH)
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
remove casualty to fresh air and keep at rest. In all cases of doubt, or when symptoms persist, seek medical advice.
🖐️ Skin Contact
After contact with skin, wash immediately with plenty of water and soap. Take off immediately all contaminated clothing.
Symptoms:
skin irritation
👁️ Eye Contact
Rinse immediately carefully and thoroughly with eye-bath or water. In case of troubles or persistent symptoms, consult an ophthalmologist.
🍽️ Ingestion/Swallowing
Rinse mouth thoroughly with water. Let water be drunken in little sips (dilution effect). Do NOT induce vomiting. In all cases of doubt, or when symptoms persist, seek medical advice.
🚨 Immediate Medical Attention Required
Treat symptomatically.
Medical Treatment
Treat symptomatically.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Provide adequate ventilation.
🧤 Hand Protection
In case of prolonged or frequently repeated skin contact: Wear suitable gloves. Suitable material: FKM (fluororubber). - Thickness of glove material: 0,4 mm Breakthrough time >= 8 h Butyl rubber. - Thickness of glove material: 0,5 mm Breakthrough time >= 8 h CR (polychloroprenes, Chloroprene rubber). - Thickness of glove material: 0,5 mm Breakthrough time >= 8 h NBR (Nitrile rubber). - Thickness of glove material: 0,35 mm Breakthrough time >= 8 h PVC (Polyvinyl chloride). - Thickness of glove material: 0,5 mm Breakthrough time >= 8 h The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it. Before using check leak tightness / impermeability. In the case of wanting to use the gloves again, clean them before taking off and air them well.
👁️ Eye Protection
Wear safety glasses; chemical goggles (if splashing is possible). DIN EN 166
😷 Respiratory Protection
With correct and proper use, and under normal conditions, breathing protection is not required. Respiratory protection necessary at: -exceeding exposure limit values -insufficient ventilation and aerosol or mist formation Suitable respiratory protective equipment: particulates filter device (DIN EN 143). Type: P1-3 The filter class must be suitable for the maximum contaminant concentration (gas/vapour/aerosol/particulates) that may arise when handling the product. If the concentration is exceeded, self-contained breathing apparatus must be used. Observe the wear time limits according GefStoffV in combination with the rules for using respiratory protection apparatus (BGR 190).
🦺 Skin/Body Protection
Suitable protective clothing: Lab apron. Minimum standard for preventive measures while handling with working materials are specified in the TRGS 500.
🌍 Environmental Exposure Controls
No information available.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
UN 3082
📦 Proper Shipping Name
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (epoxy resin (number average molecular weight <= 700), reaction product: bisphenol-A-(epichlorhydrin))
⚠️ Transport Hazard Class
9
📋 Packing Group
III
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for Kalteinbettmittel Epoclear 2000 (Harz)?
The signal word for this substance is "warning".
What is the physical form of Kalteinbettmittel Epoclear 2000 (Harz)?
Kalteinbettmittel Epoclear 2000 (Harz) is a liquid with yellowish color. It has characteristic odor.
What is the solubility of Kalteinbettmittel Epoclear 2000 (Harz)?
No information available.
What is Kalteinbettmittel Epoclear 2000 (Harz) used for?
epoxy binder
What are the hazard statements for Kalteinbettmittel Epoclear 2000 (Harz)?
This substance has 4 hazard statements: H315: Causes skin irritation. H317: May cause an allergic skin reaction. H319: Causes serious eye irritation. H411: Toxic to aquatic life with long lasting effects.
What is the melting point of Kalteinbettmittel Epoclear 2000 (Harz)?
The melting point is No information available. and the boiling point is - 200 C.