NextSDS Logo
Ar

Arti - Spray BK28 6 - 288

DANGER Gas aerosol SDS/MSDS

Chemical Product Identification & Regulatory Data

Official chemical identifiers, CAS numbers, and regulatory compliance information

Basic Product Information

Product Name
Arti - Spray BK28 6 - 288
Product Form
Mixture

Regulatory Identifiers

CAS Number
N/A

Chemical Abstracts Service registry number - unique identifier for chemical substances

Uses Information

Identified Uses
Universal color indicator to test the occlusal contacts and accurate fit of crowns and bridges.
Uses Advised Against
intraoral application

Overview

Arti - Spray BK28 6 - 288 commonly used universal color indicator to test the occlusal contacts and accurate fit of crowns and bridges..

Manage Your Safety Data Sheets

Organize and access your chemical safety data with ease.

GHS Hazard Classification & Safety Warnings

Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications

Classification Status

Classified

Signal Word

danger (Danger)

Hazard Classifications

Aerosol Category 1 H222
STOT SE Category 3 H336
Aquatic Chronic Category 3 H412

GHS Hazard Pictograms & Safety Symbols

GHS02 GHS Hazard Pictogram: Flammable hazard - Fire risk materials including gases, liquids, and solids

GHS02

GHS07 GHS Hazard Pictogram: Health hazard warning - Materials harmful to health including irritants and sensitizers

GHS07

GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions

Hazard Statements

  • H222: Extremely flammable aerosol.
  • H229: Pressurised container: May burst if heated.
  • H336: May cause drowsiness or dizziness.
  • H412: Harmful to aquatic life with long lasting effects.

Precautionary Statements

  • P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
  • P211: Do not spray on an open flame or other ignition source.
  • P251: Do not pierce or burn, even after use.
  • P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 ℃/122 ΒΊF

Chemical Manufacturers & Supply Chain

Authorized suppliers, manufacturers, and distribution network information

Dr. Jean Bausch GmbH & Co. KG company logo - Safety Data Sheet supplier organization

Dr. Jean Bausch GmbH & Co. KG

manufacturer

πŸ“

Oskar-Schindler-Str.4, 50769 KΓΆln

🌍

DE

πŸ“ž

+49 (0)221-70936-0

πŸ“ 

+49 (0)221-70936-66

24/7 Emergency Response & Poison Control

Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies

Peter Bausch (CEO)

πŸ“ž

+49 (0)221-70936-20

🌍

DE

Peter Bausch (CEO)

πŸ“ž

+49 (0)172-2601451

🌍

DE

Chemical Composition & Hazardous Ingredients

Detailed component analysis, concentration ranges, and hazardous substance identification

Product Type

mixture

Chemical Components & Hazardous Substances

Chemical Name CAS Number Concentration Hazardous
Butane
EC: 203-448-7
106-97-8 90% ⚠️ Hazardous
Propane
EC: 200-827-9
74-98-6 90% ⚠️ Hazardous
Isobutane
EC: 200-857-2
75-28-5 90% ⚠️ Hazardous
Pentane
EC: 203-692-4
109-66-0 10-20% ⚠️ Hazardous

Emergency First Aid Measures

Critical first aid procedures for chemical exposure incidents and medical emergencies

🫁 Inhalation Exposure

If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a physician if symptoms develop or persist.

πŸ–οΈ Skin Contact

Wash skin with plenty of water. If skin irritation or rash occurs: Get medical advice/attention.

πŸ‘οΈ Eye Contact

Rinse cautiously with water for several minutes. If eye irritation persists: Get medical advice/attention.

🍽️ Ingestion/Swallowing

Get medical advice/attention.

Medical Treatment

Provide general supportive measures and treat symptomatically.

Fire Fighting Measures & Emergency Response

Fire suppression methods, extinguishing media, and firefighting safety procedures

βœ… Suitable Extinguishing Media

Water spray. Dry chemical, CO2, dry sand, or alcohol-resistant foam.

❌ Unsuitable Extinguishing Media

Do not use water jet as an extinguisher, as this will spread the fire.

⚠️ Specific Fire Hazards

Extremely flammable aerosol. Pressurised container: May burst if heated. In the event of fire hazardous gases may occur.

πŸ”₯ Fire Fighting Instructions

Move container from fire area if it can be done without risk. Use water spray or fog for cooling exposed containers.

πŸ›‘οΈ Firefighter Protection Equipment

Self-contained breathing apparatus and full protective clothing must be worn in case of fire. Wear fire/flame resistant/retardant clothing.

Accidental Release Measures & Spill Response

Emergency spill cleanup procedures, containment methods, and environmental protection

🚨 Emergency Procedures

Keep unnecessary personnel away. Keep people away from and upwind of spill/leak. Wear appropriate protective equipment and clothing during clean-up. Avoid breathing mist or vapor. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Ensure adequate ventilation. Local authorities should be advised if significant spillages cannot be contained.

🌍 Environmental Precautions

Avoid release to the environment. Inform appropriate managerial or supervisory personnel of all environmental releases. Prevent further leakage or spillage if safe to do so. Avoid discharge into drains, water courses or onto the ground.

🧹 Cleanup Methods

Remove all sources of ignition. Keep away from combustible material.

Related Chemical Substances & Alternative Products

Similar chemicals with comparable safety profiles and industrial applications

Technical Specifications & Material Properties

Physical state, chemical properties, melting point, boiling point, and material characteristics

πŸ§ͺ Physical State
Gas aerosol
Critical Property
πŸ“Š Physical State Data
gas
πŸ“Š State Under Standard Conditions
Not available
πŸ‘οΈ Appearance
Not available
🎨 Colour
blue, green, red, white
πŸ“Š Colour Intensity
Not available
πŸ“Š Form
Not available
πŸ‘ƒ Odor
Characteristic
πŸ“Š Odor Threshold
No data available
πŸ§ͺ Ph
No data available
🧊 Melting Point
No data available
Critical Property
πŸ’¨ Boiling Point
-44℃
Critical Property
πŸ”₯ Flash Point
aerosol/Not applicable
Critical Property
πŸ“Š Freezing Point
No data available
πŸ“Š Softening Point
Not available
πŸ“Š Solidification Point
Not available
πŸ“Š Cloud Point
Not available
πŸ“Š Crystallisation Point
Not available
πŸ“Š Relative Evaporation Rate
No data available
πŸ’¨ Evaporation Rate
Not available
πŸ’¨ Vapor Pressure
2700 hPa (@ 20℃)
πŸ“Š Vapor Density
Not available
πŸ“Š Relative Density
No data available
πŸ“Š Bulk Density
Not available
βš–οΈ Density
1,28 g/m3
Critical Property
πŸ”₯ Flammability
Extremely flammable aerosol
πŸ“Š Upper Explosive Limit
10,9 vol %
πŸ“Š Lower Explosive Limit
1,5 vol %
πŸ“Š Explosive Limits
Not available
πŸ“Š Auto Ignition Temperature
No data available
πŸ“Š Decomposition Temperature
No data available
πŸ’§ Solubility
Water: Negligible
πŸ“Š Partition Coefficient
No data available
πŸ“Š Solubility In Water
Not available
πŸ“Š Solubility In Fat
Not available
πŸ“Š Molecular Weight
Not available
πŸ“Š Voc Content
Not applicable
πŸ“Š Metal Corrosion
Not available
πŸ“Š Dynamic Viscosity
Not available
πŸ“Š Kinematic Viscosity
Not available
πŸ“Š Properties Status
Not available

Safe Handling & Storage Procedures

Industrial handling precautions, storage conditions, and workplace safety requirements

⚠️ Handling Precautions

β€’ Keep away from sources of ignition - No smoking.

β€’ Do not pierce or burn, even after use.

β€’ Use only outdoors or in a well-ventilated area.

β€’ Ground/bond container and receiving equipment.

β€’ Avoid prolonged exposure.

β€’ Avoid contact with eyes.

β€’ Observe good industrial hygiene practices.

β€’ Do not eat, drink or smoke when using this product.

β€’ Wear appropriate personal protective equipment.

β€’ Keep only in original container.

β€’ Avoid release to the environment.

πŸͺ Storage Conditions

β€’ Protect from sunlight.

β€’ Do not expose to temperatures exceeding 50 ℃/ 122 ΒΊF.

β€’ Store in a well-ventilated place.

β€’ Keep container tightly closed.

πŸ”₯ Fire Prevention Measures

Keep away from ignition sources.

Exposure Controls & Personal Protective Equipment (PPE)

Occupational exposure limits, engineering controls, and required safety equipment

🏭 Engineering Controls

Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level.

🧀 Hand Protection

Wear appropriate protective gloves for prolonged or repeated skin contact.

πŸ‘οΈ Eye Protection

If skin or eye contact with the product is probable, protective glasses with side shield are recommended.

😷 Respiratory Protection

In case of inadequate ventilation wear respiratory protection.

🦺 Skin/Body Protection

Wear suitable protective clothing. Personal protection equipment should be chosen according to the CEN standards and in discussion with the supplier of the personal protective equipment.

🌍 Environmental Exposure Controls

Inform appropriate managerial or supervisory personnel of all environmental releases.

Chemical Stability & Reactivity Data

Chemical stability, hazardous reactions, and incompatible materials information

βœ… Chemical Stability

Stable under normal conditions of use.

βš—οΈ Reactivity

Extremely flammable aerosol. Pressurised container: May burst if heated.

⚠️ Hazardous Reactions

No dangerous reactions known under normal conditions of use.

🚫 Conditions to Avoid

Avoid contact with hot surfaces. Heat. No flames, no sparks. Eliminate all sources of ignition.

πŸ§ͺ Incompatible Materials

Strong oxidizers.

πŸ’¨ Hazardous Decomposition Products

Carbon monoxide. Carbon dioxide. Hydrocarbon fragments.

Ecological Information & Environmental Impact

Environmental toxicity, biodegradation, bioaccumulation, and ecological effects data

🌱 Toxicity

Ecology - general Harmful to aquatic life with long lasting effects. Hazardous to the aquatic environment, Not classified short-term (acute) Hazardous to the aquatic environment, Harmful to aquatic life with long lasting effects. long-term (chronic)

🌱 Persistence and degradability

Pentane (109-66-0) Persistence and degradability Readily biodegradable. (OECD 301F method). Biodegradation Butane (106-97-8) 87 % Persistence and degradability Readily biodegradable. Propane (74-98-6) Persistence and degradability Readily biodegradable.

🌱 Bioaccumulative potential

Pentane (109-66-0) Bioconcentration factor (BCF REACH) 171 Log Pow 3,39 Log Kow 3,45 @ 25 ℃ Butane (106-97-8) Log Pow 1,09 - 2,8 @ 20 °℃, pH 7 Propane (74-98-6) Log Pow 1,09 - 2,8 @ 20 °℃, pH 7

🌱 Mobility in soil

No additional information available.

🌱 Results of PBT and vPvB assessment

Occlusion spray This substance/mixture does not meet the PBT criteria of REACH regulation, annex XIII. This substance/mixture does not meet the vPvB criteria of REACH regulation, annex XIII.

🌱 Other adverse effects

Other adverse effects No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creation potential, endocrine disruption, global warming potential) are expected from this product.

🌱 Other adverse effects

No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creation potential, endocrine disruption, global warming potential) are expected from this product.

Waste Disposal & Treatment Methods

Waste disposal procedures, treatment methods, and regulatory compliance requirements

♻️ Waste Treatment Methods

Collect and reclaim or dispose in sealed containers at licensed waste disposal site. Do not allow this material to drain into sewers/water supplies. Do not contaminate ponds, waterways or ditches with chemical or used container. Dispose of contents/container in accordance with licensed collector's sorting instructions.

πŸ—‚οΈ Product Disposal Recommendations

Since emptied containers may retain product residue, follow label warnings even after container is emptied. Empty containers should be taken to an approved waste handling site for recycling or disposal.

🏷️ Waste Classification Codes

08 02 01 waste coating powders EWC
15 01 04 metallic packaging EWC

Transportation & Shipping Information

UN numbers, shipping names, transport classes, and regulatory transport requirements

🏷️ UN Number

UN 1950

πŸ“¦ Proper Shipping Name

AEROSOLS

⚠️ Transport Hazard Class

2.1

πŸ“‹ Packing Group

Not applicable

πŸš› ADR Transport Precautions

190, 327, 344, 625

🚒 IMDG Maritime Transport Precautions

63, 190, 277, 327, 344, 381, 959

✈️ IATA Air Transport Precautions

A145, A167, A802

Regulatory Information & Compliance

Chemical regulations, safety assessments, and regulatory compliance status

πŸ“‹ Regulatory Summary

Contains no substance on the REACH candidate list. Contains no REACH Annex XIV substances. Contains no substance subject to Regulation (EU) No 649/2012. Contains no substance subject to Regulation (EU) No 2019/1021.

❌ Chemical Safety Assessment

No chemical safety assessment has been performed for this substance.

ℹ️ Additional Regulatory Information

VOC content not applicable.

Chemical Safety FAQ & Common Questions

Most frequently asked questions about safety, handling, storage, and regulatory compliance

What is the hazard signal word for Arti - Spray BK28 6 - 288?

The signal word for this substance is "danger".

What is the physical form of Arti - Spray BK28 6 - 288?

Arti - Spray BK28 6 - 288 is a gas aerosol with blue, green, red, white color. It has characteristic odor.

What is the solubility of Arti - Spray BK28 6 - 288?

Water: Negligible

What is Arti - Spray BK28 6 - 288 used for?

Universal color indicator to test the occlusal contacts and accurate fit of crowns and bridges.

What are the hazard statements for Arti - Spray BK28 6 - 288?

This substance has 4 hazard statements: H222: Extremely flammable aerosol. H229: Pressurised container: May burst if heated. H336: May cause drowsiness or dizziness. H412: Harmful to aquatic life with long lasting effects.

What is the melting point of Arti - Spray BK28 6 - 288?

The melting point is No data available and the boiling point is -44℃.