NextSDS Logo
Safety Data Sheet EN

Siliconspray 300 ML

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Siliconspray 300 ML
Product Code
3310

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Eluent, Lubricant, SU21 - Consumer uses: Private households (=general public = consumers), SU22 - Professional uses: Public domain (administration, education, entertainment, services, craftsmen), PC24 - Lubricants, greases, release products, PROC11 - Non industrial spraying, ERC 8a - Wide dispersive indoor use of processing aids in open systems, ERC 8d - Wide dispersive outdoor use of processing aids in open systems

Uses advised against

No information available at present.

Manufacturers & Suppliers

L

LIQUI MOLY GmbH

Jerg-Wieland-Strae 4, D-89081 Ulm-Lehr

Emergency Contacts

LIQUI MOLY GmbH

(+49) 0731-1420-0

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Aquatic Chronic Cat. 3 H412
Aerosol Cat. 1 H222
Aerosol Cat. 1 H229

GHS Pictograms

GHS02 - Flammable

GHS02

Hazard Statements

H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H412 Harmful to aquatic life with long lasting effects.

Precautionary Statements

P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P410+P412 Protect from sunlight. Do no expose to temperatures exceeding 50 C.
P501 Dispose of contents/container in a safe way.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Aerosol

Chemical Name CAS Number Concentration Hazardous
Hydrocarbons, C7-C9, n-alkanes, isoalkanes, cyclics EC: 920-750-0 --- 2.5 - 10% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person from danger area. Supply person with fresh air and consult doctor according to symptoms. If the person is unconscious, place in a stable side position and consult a doctor. Respiratory arrest - Artificial respiration apparatus necessary.

Symptoms: Irritation of the respiratory tract, Headaches, Dizziness, Effects/damages the central nervous system, Coordination disorders, fatigue, Unconsciousness.

Skin contact

Remove polluted, soaked clothing immediately, wash thoroughly with plenty of water and soap, in case of irritation of the skin (flare), consult a doctor.

Symptoms: Irritation of the skin. Drying of the skin. Dermatitis (skin inflammation).

Eye contact

Remove contact lenses. Wash thoroughly for several minutes using copious water. Seek medical help if necessary. Consult medical specialist.

Symptoms: Irritation of the eyes.

Ingestion

Rinse the mouth thoroughly with water. Immediate admittance to a hospital.

Immediate Medical Attention

Consult doctor according to symptoms. If the person is unconscious, consult a doctor. Respiratory arrest - Artificial respiration apparatus necessary. In case of irritation of the skin (flare), consult a doctor. Seek medical help if necessary. Consult medical specialist. Immediate admittance to a hospital.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ensure good ventilation. This can be achieved by local suction or general air extraction. If this is insufficient to maintain the concentration under the WEL or AGW values, suitable breathing protection should be worn. Applies only if maximum permissible exposure values are listed here.

Hands

Chemical resistant protective gloves (EN 374). Recommended Protective nitrile gloves (EN 374) Minimum layer thickness in mm: 0,65 Permeation time (penetration time) in minutes: - 120 Protective hand cream recommended. Additional information on hand protection - No tests have been performed. In the case of mixtures, the selection has been made according to the knowledge available and the information about the contents. Selection of materials derived from glove manufacturer's indications. Final selection of glove material must be made taking the breakthrough times, permeation rates and degradation into account. Selection of a suitable glove depends not only on the material but also on other quality characteristics and varies from manufacturer to manufacturer. In the case of mixtures, the resistance of glove materials cannot be predicted and must therefore be tested before use. The exact breakthrough time of the glove material can be requested from the protective glove manufacturer and must be observed.

Eyes

With danger of contact with eyes. Tight fitting protective goggles with side protection (EN 166).

Respiratory

Normally not necessary. In case of emergency: Respiratory protection appliance (insulation device) (e.g. EN 137 or EN 138)

Skin/Body

Protective working garments (e.g. safety shoes EN ISO 20345, long-sleeved protective working garments)

Environmental

No information available at present.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Aerosol, Substance: Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Colourless
Colour Intensity
---
Form
---
Odor
Characteristic
Odor Threshold
Not determined
Ph
n.a.
Melting Point
Not determined
Boiling Point
Not determined
Flash Point
Not determined
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not determined
Vapor Pressure
Not determined
Vapor Density
Not determined
Relative Density
---
Bulk Density
n.a.
Density
0,595 g/ml
Flammability
Not determined
Upper Explosive Limit
9,5 Vol-% (Propane)
Lower Explosive Limit
0,9 Vol-% (Naphtha (petroleum), hydrotreated light)
Explosive Limits
---
Auto Ignition Temperature
n.a.
Decomposition Temperature
Not determined
Solubility
Alcohols, Hydrocarbons
Partition Coefficient
Not determined
Solubility In Water
Insoluble
Solubility In Fat
Not determined
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1950
Shipping Name
AEROSOLS
ADR

Persons employed in transporting dangerous goods must be trained. All persons involved in transporting must observe safety regulations. Precautions must be taken to prevent damage.

IMDG

Persons employed in transporting dangerous goods must be trained. All persons involved in transporting must observe safety regulations. Precautions must be taken to prevent damage.

IATA

Persons employed in transporting dangerous goods must be trained. All persons involved in transporting must observe safety regulations. Precautions must be taken to prevent damage.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Siliconspray 300 ML?

The signal word is danger.

What is the physical form of Siliconspray 300 ML?

Siliconspray 300 ML is a aerosol, substance: liquid with colourless color. It has characteristic odor.

What is the solubility of Siliconspray 300 ML?

Alcohols, Hydrocarbons

What is Siliconspray 300 ML used for?

Eluent, Lubricant, SU21 - Consumer uses: Private households (=general public = consumers), SU22 - Professional uses: Public domain (administration, education, entertainment, services, craftsmen), PC24 - Lubricants, greases, release products, PROC11 - Non industrial spraying, ERC 8a - Wide dispersive indoor use of processing aids in open systems, ERC 8d - Wide dispersive outdoor use of processing aids in open systems

What are the hazard statements for Siliconspray 300 ML?

This substance has 3 hazard statements:

  • H222: Extremely flammable aerosol.
  • H229: Pressurised container: May burst if heated.
  • H412: Harmful to aquatic life with long lasting effects.

What is the melting point of Siliconspray 300 ML?

The melting point is Not determined and the boiling point is Not determined.

Compliance Scanner

Scan your compliance