NextSDS Logo
Safety Data Sheet EN

DRIVE LS TRANSMISSION OIL W90LS

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
DRIVE LS TRANSMISSION OIL W90LS
Product Code
311D

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Lubricant for rearaxle with limited sleep.

Uses advised against

This product should not be used for other purposes than those specified without the advice of an expert.

Manufacturers & Suppliers

P

PETRONAS LUBRICANTS ITALY S.P.A.

manufacturer

Via Santena 1, 10029 Villastellone (Torino) - ITALY

0039 01196131

Emergency Contacts

Poisons Centre

+32 (0)70 - 245 245

Nationaal Vergiftigingen Informatie Centrum

+31 (0)30 - 274 88 88

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Additive package containing nitrogen, sulphur, phosphorus, antioxidants and polymers.

Chemical Name CAS Number Concentration Hazardous
Reaction products of bis(4- methylpentan- 2yl) dithiophosphoric acid with phosphorus oxide, propylene oxide and amines, C12- 14 alkyl (branched) EC: 300-298-5 93925-00-9 0.1 - 0.9% Yes
(Z)- o c t a d e c - 9enylamine EC: 204-015-5 112-90-3 1 - 3% Yes
Formaldehyde, reaction products with branched and linear heptylphenol, carbon disulfide and hydrazine EC: 931-384-6 --- 0.4% Yes
Severely refined paraffinic mineral oils --- 86 - 92% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Expose affected person to fresh air and obtain medical attention if necessary.

Skin contact

Remove contaminated clothes and shoes and rinse thoroughly with plenty of water and soap.

Eye contact

Rinse thoroughly with plenty of water for at least 10 minutes keeping eyelids open. Obtain medical attention

Symptoms: pain or redness develops or persists.

Ingestion

Do not induce vomiting to avoid aspiration into the respiratory tracts. Obtain medical attention.

Immediate Medical Attention

Obtain medical attention. Obtain medical attention if any pain or redness develops or persists. Obtain medical attention if necessary.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Avoid production and diffusion of mist and aereosol with utilization of localized ventilation/aspiration or other required precautions. If necessary, adopt all required precaution to avoid product immission in environment (e.g., blasting systems, catch basins, ...).

Hands

Wear suitable gloves in oil-proof material (i.e. neoprene, nitrile). Gloves should be changed when they show wear. The kind of gloves and the term of use must be decided from employer with regard to processing and to allow for legislation on personal protection equipment and glove producer's indications. Wear gloves only with clean hands.

Eyes

Chemical goggles and face shield in case of oil splashes.

Respiratory

None required under normal conditions of use. Use approved full face respirator with organic vapour filter cartridge if the recommended exposure limits are exceeded.

Skin/Body

Wear suitable protective clothing (for further information, refer to CEN- EN 14605); change it immediately in case of large contamination and wash it before subsequent use.

Environmental

Refer to technical precautions and also to sections 6.2, 6.3, 7.2, 12 and 13.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Cloud Point
---
Softening Point
---
Solubility
---
Odor
---
Density
0.905 G/CM3
Flash Point
>200C
Auto Ignition Temperature
---
Form
---
Flammability
---
Solubility In Water
INSOLUBLE
Colour
---
Vapor Pressure
---
Kinematic Viscosity
14.5 CST
Melting Point
---
State Under Standard Conditions
---
Relative Evaporation Rate
---
Physical State
VISCOUS LIQUID
Solubility In Fat
---
Decomposition Temperature
---
Ph
---
Odor Threshold
---
Crystallisation Point
---
Lower Explosive Limit
---
Explosive Limits
---
Voc Content
---
Relative Density
---
Physical State Data
liquid
Bulk Density
---
Evaporation Rate
---
Dynamic Viscosity
---
Partition Coefficient
---
Appearance
VISCOUS LIQUID
Solidification Point
---
Freezing Point
---
Metal Corrosion
---
Boiling Point
>300C
Vapor Density
---
Properties Status
---
Colour Intensity
---
Molecular Weight
---
Upper Explosive Limit
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
Not applicable
Shipping Name
Not applicable
Transport Class
Not applicable
Packing Group
Not applicable
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for DRIVE LS TRANSMISSION OIL W90LS?

The signal word is no signal word.

What is the physical form of DRIVE LS TRANSMISSION OIL W90LS?

DRIVE LS TRANSMISSION OIL W90LS is a viscous liquid appearing as viscous liquid .

What is DRIVE LS TRANSMISSION OIL W90LS used for?

Lubricant for rearaxle with limited sleep.