Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- D ULTRA ENGINE POWER 15W40 CK-4
- Product Code
- 74629
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Engine oil.
Uses advised against
This product should not be used for other purposes than those specified without the advice of an expert.
Manufacturers & Suppliers
PETRONAS LUBRICANTS ITALY S.P.A.
manufacturer
Via Santena 1, 10029 Villastellone (Torino)
+39.01196131
Emergency Contacts
Emergency Answer Service
+44 1235 239670
24h/7d
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Severely refined mineral and/or synthetic oils, additives.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Distillates, petroleum, hydrotreated heavy paraffinic EC: 265-157-1 | 64742-54-7 | 3 - 4% | Yes |
| reaction mass of isomers of C7-9-alkyl 3-(3,5-di-transbutyl-4hydroxyphenyl)propioate EC: 406-040-9 | 125643-61-0 | 2.5 - 3% | Yes |
| Lubricating oils, petroleum, C20-50-hydrotreated neutral oil-based EC: 276-738-4 | 72623-87-1 | 1.5 - 2% | Yes |
| Lubricating oils, petroleum, C15-30-hydrotreated neutral oil-based EC: 276-737-9 | 72623-86-0 | 1.5 - 2% | Yes |
| Phosphorodithioic acid, mixed O,O-bis (sec-Bu and isooctyl) esters, zinc salts EC: 298-577-9 | 93819-94-4 | 1 - 1.5% | Yes |
| Distillates (petroleum), solvent-dewaxed light paraffinic EC: 265-159-2 | 64742-56-9 | 1 - 1.5% | Yes |
| Distillates (petroleum), solvent-dewaxed heavy paraffinic EC: 265-169-7 | 64742-65-0 | 1 - 1.5% | Yes |
| Paraffin oils, petroleum, catalytic dewaxed heavy EC: 265-174-4 | 64742-70-7 | 1 - 1.5% | Yes |
| Bis(nonylphenyl)amine EC: 253-249-4 | 36878-20-3 | 1 - 1.5% | Yes |
| Molibdenum polysulphide long chain alkyl dithiocarbamate complex EC: 457-320-2 | --- | 0.1 - 0.25% | Yes |
| Not classified oils | --- | 70 - 90% | No |
Notes
The mineral base oils contained in this product are severely refined and contain less than 3% DMSO extract according to IP 346 method, and are therefore not classified as carcinogen according to Regulation (EC) No 1272/2008, note L. The classification as a carcinogen need not apply if it can be shown that the substance contains less than 3% DMSO extract as measured by IP 346 "Determination of polycyclic aromatics in unused lubricating base oils and asphaltene free petroleum fractions Dimethyl sulphoxide extraction refractive index method", Institute of Petroleum, London. This note applies only to certain complex oil-derived substances in Part 3.
First Aid Measures
Emergency procedures for chemical exposure incidents
Expose affected person to fresh air and obtain medical attention if necessary.
Remove contaminated clothes and shoes and rinse thoroughly with plenty of water and soap.
Rinse thoroughly with plenty of water for at least 10 minutes keeping eyelids open. Remove contact lenses if this can be done easily. In case of contact with hot product, rinse thoroughly with plenty of water to dissipate heat.
Symptoms: development and persistence of pain and redness
Wash out thoroughly the mouth with water.
Immediate Medical Attention
Obtain immediate medical attention in case of ingestion. Obtain medical attention in case of development and persistence of pain and redness for eye contact. Obtain immediate medical attention to assess eye conditions and the correct treatment to be practiced in case of contact with hot product. Obtain medical attention if necessary for inhalation.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
B ULTRA ENGINE POWER 10W30 CK-4
---
DEVELON ULTRA ENGINE POWER 15W-40 CK-4
---
DEVELON ULTRA ENGINE POWER 10W-30 CK-4
---
D PREM ENGINE POWER 1000 10W-40 CK-4
---
ENGINE POWER 15W/40
---
ULTRA ENGINE POWER 10W/30-PN 941-00908C/941-00909D
---
DOOSAN ENGINE POWER 10W30 CI-4
---
ENGINE POWER 10W/30
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Avoid production and diffusion of mist and aerosol with utilization of localized ventilation/aspiration or other required precautions. Adopt all required precaution to avoid product immission in environment (e.g., blasting systems, catch basins, ...).
Wear suitable gloves (i.e. neoprene, nitrile). Gloves should be changed when they show wear. The kind of gloves and the term of use must be decided from employer with regard to processing and to allow for DPI legislation and glove producer's indications. Wear gloves only with clean hands.
Chemical goggles and face shield in case of oil splashes.
None required under normal conditions of use. Use approved full face respirator with organic vapour filter cartridge if the recommended exposure limits are exceeded.
Wear suitable protective clothing (for further information, refer to CEN-EN 14605); change it immediately in case of large contamination and wash it before subsequent use.
Refer to technical precautions and also to sections 6.2, 6.3, 7.2, 12 and 13.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for D ULTRA ENGINE POWER 15W40 CK-4?
The signal word is no signal word.
What is the physical form of D ULTRA ENGINE POWER 15W40 CK-4?
D ULTRA ENGINE POWER 15W40 CK-4 is a liquid appearing as viscous . It has not relevant odor.
What is D ULTRA ENGINE POWER 15W40 CK-4 used for?
Engine oil.
What is the melting point of D ULTRA ENGINE POWER 15W40 CK-4?
The melting point is N.A. and the boiling point is >300 C (572 F) ( ASTM D1120 ).