ENGINE POWER 15W/40 - PN 941 - 00905C/941 - 00906D

Expose affected person to fresh air and obtain medical attention if necessary.

Remove contaminated clothes and shoes and rinse thoroughly with plenty of water and soap.

Rinse thoroughly with plenty of water for at least 10 minutes keeping eyelids open. Obtain medical attention if any pain or redness develops or persists.

Symptoms: Pain or redness develops or persists.

Do not induce vomiting to avoid aspiration into the respiratory tracts. Obtain medical attention.

Avoid production and diffusion of mist and aereosol with utilization of localized ventilation/aspiration or other required precautions. If necessary, adopt all required precaution to avoid product immission in environment (e.g., blasting systems, catch basins, ...).

Wear suitable gloves in oil-proof material (i.e. neoprene, nitrile). Gloves should be changed when they show wear. The kind of gloves and the term of use must be decided from employer with regard to processing and to allow for legislation on personal protection equipment and glove producer's indications. Wear gloves only with clean hands.

Chemical goggles and face shield in case of oil splashes.

None required under normal conditions of use. Use approved full face respirator with organic vapour filter cartridge if the recommended exposure limits are exceeded.

Wear suitable protective clothing (for further information, refer to CEN- EN 14605); change it immediately in case of large contamination and wash it before subsequent use.

Refer to technical precautions and also to sections 6.2, 6.3, 7.2, 12 and 13.