Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Refined sunflower oil
Regulatory Identifiers
- CAS Number
- 8001-21-6 Check regulations →
- EC Number
- 232-273-9 Check regulations →
- REACH No.
- The substance is exempted from registration, according to Art. 2 (7) a)and Annex V of REACH regulation.
Identified Uses
_Sector of Use [SU]:_SU 3 – Industrial uses; SU 4 – Manufacture of food products. _Chemical Product Category [PC]:_PC 0 – Other; food material (feedstock for manufacture of food products). _Process Category [PROC]:_PROC 2 – Use in closed, continuous process with occasional controlled exposure. _Environmental Release Category [ERC]:_ERC 6a – Industrial use resulting in manufacture of another substance (use of interme- diates). _Article Category, no release intended [AC]:_Other; TARIC code: 1512 19 90;sunflower seed oil and its fractions - refined oil.
Uses advised against
None.
Manufacturers & Suppliers
Bunge Növényolajipari Zrt. Martfűi Gyára
manufacturer
Szolnoki út 201. H-5435 Martfű
+36-56-581-176
Bunge Növényolajipari Zrt.
distributor
H-1134 Budapest, Váci út 33.
+36-1-237-6400
Emergency Contacts
Országos Kémiai Biztonsági Központ, Egészségügyi Toxikológiai Tájékoztató Szolgálat(OKBI - ETTSZ)
+36-80-20-1199 (toll free)
M-Th.: 08:00 – 16:00,F.: 08:00 – 14:00
HU
Országos Kémiai Biztonsági Központ, Egészségügyi Toxikológiai Tájékoztató Szolgálat (OKBI - ETTSZ)
06-1-476-6464
M-Th.: 08:00 – 16:00,F.: 08:00 – 14:00
HU
General Emergency
112
Ambulance
104
Fire service
105
Police
107
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
3.1.1. Chemical nature: substances of unknown or variable composition or biological origin (UVCB).
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| sunflower oil EC: 232-273-9 | 8001-21-6 | 99% | No |
| Water EC: 231-791-2 | 7732-18-5 | 0.5% | No |
| N/A | --- | 0.5% | No |
See Section 16 for full text of H-statements,R- and S-phrases.
Notes
* NA: Not applicable. ** See Section 1, point 1.1.
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled then fresh air is needed, consult a doctor in case of symptoms.
Wash with soap and warm water.
Rinse under warm running water for a few minutes (drinking water or isotonic solution).
If you feel unwell then drink potable water (upto 2 cups.). Get medical attention if symptoms are prolonged.
Immediate Medical Attention
Immediate medical attention and special treatment are not required.
Medical Treatment
special treatment are not required.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Extinguish by any standard extinguishing media, except water: using alcohol-resistant foam, carbon-dioxide or dry powder.
Fire extinguishing with water not recommended.
Remove substance from the fire zone.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
For non-emergency personnel: Collect the spilled substance by liquid-absorbing material (e.g. sawdust, perlite, or other absorbent). For emergency responders: Remove(take away)exposedperson(s)from the dangerous zone.
Prevent releasingto sewer(drain)or surface water.
Collect the spilled substance by liquid-absorbing material (e.g. sawdust, perlite, or other absorbent),then treat as waste.
Materials: liquid-absorbing material (e.g. sawdust, perlite, or other absorbent)
Related Substances
Similar chemicals with comparable safety profiles
Refined sunflower oil
CAS: 8001-21-6
Refined sunfloweroil
---
Refined oleic sunflower oil
---
Refined high oleic sunflower oil
CAS: 210823-73-7
Refined high oleic sunflower oil
CAS: 8001-21-6
Fully Refined Sunflower Oil
---
Fully Refined High Oleic Sunflower Oil
---
Reffined Hight Oleic Sunflower Oil
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Personal protective equipment is not necessary. Slipping hazard if spilled.
Store in closed, acid-proof, plastic or carbon-steel containers or buckets. Protect from direct sunshine and store at cool temperature. Avoid application of high temperatures or strong oxidizers.
No special measures required. Handle according to best health- and safety practice. Wash hands after use. Affected protective wear should be washed before reuse.
Avoid application of high temperatures or strong oxidizers. Remove substance from the fire zone.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Substance/mixture related measures to prevent exposure during identified uses: Not applicable. Structural measures to prevent exposure: Personal protective wear is recommended. Choose it according to current CEN standards and supplier advice. Organisational measures to prevent exposure: Handle according to best health- and safety practice. Wash hands after use. Affected protective wear should be washed before reuse. Keep tight all medical instructions. Technical measures to prevent exposure: Prevent inhalation of vapour or fog by proper aeration.
Use protective gloves: PVC or Nitrile rubber, NBR; thickness: > 0.11 mm; permeation value: > 480 min. The oil may weep the gloves – change them frequently.
If splashing hazard occurs, wear protective glasses or mask.
Generally no equipment needed. In case of non-proper aeration or heating of the product use filter breather type A2. Contact the local EHS manager when further measures are required.
Personal protective wear is recommended.
Substance/mixture related measures to prevent exposure: Not applicable. Instruction measures to prevent exposure: See Sections 6 and 7. Obeying the relevant national legislation is mandatory. Organisational measures to prevent exposure: Not applicable. Technical measures to prevent exposure: See Sections 6 and 7.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal(purpose-like)conditions of use and storage.
Stable at normal(purpose-like)conditions of use.
Hazardouspolymerization does not occur.
Avoid application of high temperatures and strongoxidizers.
Strongoxidizers.
No hazardous decomposition products known at normal (purpose-like) use. Carbon monoxide and carbon dioxide gases (CO, CO2) at thermal decomposition temperature.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
As waste, the substance can be placed in landfill or considered as recyclable, after consultation with the relevant authorities.
As waste, the substance can be placed in landfill or considered as recyclable, after consultation with the relevant authorities.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not applicable.
- Shipping Name
- Not applicable.
- Transport Class
- Not applicable.
- Packing Group
- 10 – 13: Other liquids and solids.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The product does not need to be labelled according to EC directives or respective national law.
The substance is food grade.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Refined sunflower oil?
The signal word is no signal word.
What is the physical form of Refined sunflower oil?
Refined sunflower oil is a liquid appearing as at room temperature light, yellow, transparent, odourless liquid (sometimes with mild scent reminiscent of the base material),oilyliquid. with light, yellow color. It has neutral,a mild scent reminiscent of sunflowerpermitted. odor.
What is the solubility of Refined sunflower oil?
Not soluble in water.
What is Refined sunflower oil used for?
_Sector of Use [SU]:_SU 3 – Industrial uses; SU 4 – Manufacture of food products. _Chemical Product Category [PC]:_PC 0 – Other; food material (feedstock for manufacture of food products). _Process Category [PROC]:_PROC 2 – Use in closed, continuous process with occasional controlled exposure. _Environmental Release Category [ERC]:_ERC 6a – Industrial use resulting in manufacture of another substance (use of interme- diates). _Article Category, no release intended [AC]:_Other; TARIC code: 1512 19 90;sunflower seed oil and its fractions - refined oil.
What is the melting point of Refined sunflower oil?
The melting point is [-13°C]–[-15°C]. and the boiling point is Not available..