NextSDS Logo
Safety Data Sheet EN

Refined oleic sunflower oil

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Refined oleic sunflower oil

Regulatory Identifiers

CAS Number
N/A
REACH No.
Substance exempt from registration under REACH appendix IV.

Identified Uses

Animal feed, human foodstuffs, various technical uses (lubricants, solvents, additives, etc.), fuel production.

Manufacturers & Suppliers

S

SAIPOL

manufacturer

Immeuble boulevard maritime, F-76530 GRAND-COURONNE

+33 (0)2 35 18 55 10

Emergency Contacts

I.N.R.S.

+33 (0)1 45 42 59 59

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type uvcb

Refined oleic sunflower oil; Glycerids in C16-18 and unsatured in C18

Chemical Name CAS Number Concentration Hazardous
Refined oleic sunflower oil EC: 266-948-4 67701-30-8 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

In the event of inhalation, take the person out of the exposure zone. If the person is not breathing, administer artificial respiration.

Skin contact

Rinse well with soap and water.

Eye contact

Open eyelids and rinse eyes with water.

Ingestion

Never attempt to make an unconscious person swallow. Rinse the mouth with water.

Immediate Medical Attention

In the event of persistent symptoms or when in doubt, contact a doctor immediately.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Fog, aqueous film-forming foams (AFFF), powders, inert gases. (class-B extinguisher)

Unsuitable media

Water.

Firefighter Protection

Wear an insulated breathing apparatus. Appropriate protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Stop the leak at the source if possible. Plug the product and avoid pouring it into sewer drains or waterways, by using oil snares and absorbent materials. Eliminate all nearby sources of heat, flame or spark. Notify the fire fighters and the appropriate authorities in the event of a situation that cannot be controlled quickly and effectively.

Environmental

Avoid pouring it into sewer drains or waterways, by using oil snares and absorbent materials.

Cleanup methods

Collection: Contain spills and collect them using a pump or sand or any other inert absorbent material. Store waste in appropriate, closed recipients so that it can be properly disposed of. Cleaning: Degrease using alkaline and surface active products.

Materials: pump, sand, inert absorbent material, alkaline and surface active products

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Drums: Preventive measures to prevent accidental spillage (securing the drums).

Storage

Away from heat, flame or spark. Bulk: in a retaining area

Fire prevention

Away from heat, flame or spark.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

In the event of extended or repeated contact, use protective gloves.

Eyes

Safety goggles.

Respiratory

Respiratory protection is not required.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Lower Explosive Limit
---
Cloud Point
---
Colour
Amber-yellow
Auto Ignition Temperature
>320 °C
Crystallisation Point
---
Solubility
Highly soluble
Relative Evaporation Rate
---
Boiling Point
---
Dynamic Viscosity
51-62 mPa.s (at 20°C); 50 mPa.s (at 21-28°C)
Ph
(Non-aqueous product)
Appearance
---
Explosive Limits
---
State Under Standard Conditions
---
Evaporation Rate
---
Relative Density
0.920 - 0.925
Form
---
Physical State Data
liquid
Solubility In Fat
---
Decomposition Temperature
---
Freezing Point
---
Vapor Pressure
---
Solubility In Water
Insoluble in water (< 1mg/L)
Odor Threshold
---
Molecular Weight
---
Solidification Point
---
Partition Coefficient
---
Density
---
Kinematic Viscosity
---
Metal Corrosion
---
Odor
Practically odorless
Softening Point
---
Flammability
---
Vapor Density
---
Colour Intensity
---
Melting Point
-17 °C
Flash Point
>200 °C
Properties Status
---
Voc Content
---
Bulk Density
---
Physical State
Liquid viscous
Upper Explosive Limit
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Product stable at ordinary storage, handling and use temperatures.

Avoid

Heat, spark, combustion point, flame.

Incompatible

Highly oxidant agents.

Decomposition

At temperatures greater than 200°C: Acroleine. Incomplete combustion and thermolysis produce toxic gases such as CO, CO2, aldehydes and soot.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

Toxicity

Toxicity - invertebrates (CE50, 48h): > 1 000mg/L (bibliography, ToxMINDS 2008) Toxicity - algae (CE50, 72h): > 1 000mg/L (bibliography, ToxMINDS 2008) Toxicity - fish (CE50, 96h): > solubility in water (bibliography and modeling, ToxMINDS 2008)

Persistence and degradability

Potential for breakdown: Quickly biodegradable. Rich in DBO, avoid putting too much in water treatment plants
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

Do not discharge in drains or in nature. Comply with the conditions authorized by local, regional or national regulations.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Substance listed in the EC inventory. Not classified as hazardous. Chemical safety assessment not required.

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Refined oleic sunflower oil?

The signal word is no signal word.

What is the physical form of Refined oleic sunflower oil?

Refined oleic sunflower oil is a liquid viscous with amber-yellow color. It has practically odorless odor.

What is the solubility of Refined oleic sunflower oil?

Highly soluble

What is Refined oleic sunflower oil used for?

Animal feed, human foodstuffs, various technical uses (lubricants, solvents, additives, etc.), fuel production.

What is the melting point of Refined oleic sunflower oil?

The melting point is -17 °C .