Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
Interflon Fin Grease commonly used lubricant.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS02
GHS07
GHS08
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H315: Causes skin irritation.
- H412: Harmful to aquatic life with long lasting effects.
Precautionary Statements
- P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 C/122 F.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
Interflon b.v.
manufacturer
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
UK National Poisons Emergency number
+44 870 600 6266
GB
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
mixtureGeneral Composition
Blend of mineral oils, inorganic thickener, solvent, additives and Teflon. Propellant gas propane, butane and isobutane.
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons, C7-C9, isoalkanes EC: 921-728-3 | N/A | 10-25% | ⚠️ Hazardous |
| butane EC: 203-448-7 | 106-97-8 | 10-25% | ⚠️ Hazardous |
| propane EC: 200-827-9 | 74-98-6 | 10-25% | ⚠️ Hazardous |
| isobutane EC: 200-857-2 | 75-28-5 | 10-25% | ⚠️ Hazardous |
Additional Information
Note: Any entry in the EC column that begins with the number "9" is a Provisional List Number provided by ECHA pending publication of the official EC Inventory Number for the substance. See Section 16 for additional CAS number information for the substance. For the wording of the listed hazard phrases refer to section 16.
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
In case of unconsciousness place patient stably in side position for transportation.
🖐️ Skin Contact
Immediately wash with water and soap and rinse thoroughly.
👁️ Eye Contact
Rinse opened eye for several minutes under running water. Then consult a doctor.
🍽️ Ingestion/Swallowing
If symptoms persist consult doctor.
🚨 Immediate Medical Attention Required
No further relevant information available.
Medical Treatment
No further relevant information available.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
No further data; see item 7.
🧤 Hand Protection
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation Protective gloves The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Practical experience has shown that gloves of Nitril offer sufficient protection. Glove thickness: 0,13 mm Breakthrough time: > 15 minutes The penetration times are not determined by method EN 374 Part 3.
👁️ Eye Protection
Tightly sealed goggles (EN166)
😷 Respiratory Protection
Not required.
🦺 Skin/Body Protection
Protective work clothing (EN340)
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
UN1950
📦 Proper Shipping Name
AEROSOLS
📋 Packing Group
Void
🚛 ADR Transport Precautions
Warning: Gases.
🚢 IMDG Maritime Transport Precautions
Warning: Gases.
✈️ IATA Air Transport Precautions
Warning: Gases.
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for Interflon Fin Grease?
The signal word for this substance is "danger".
What is the physical form of Interflon Fin Grease?
Interflon Fin Grease is a aerosol with white color. It has recognisable odor.
What is Interflon Fin Grease used for?
Lubricant
What are the hazard statements for Interflon Fin Grease?
This substance has 4 hazard statements: H222: Extremely flammable aerosol. H229: Pressurised container: May burst if heated. H315: Causes skin irritation. H412: Harmful to aquatic life with long lasting effects.
What is the melting point of Interflon Fin Grease?
The melting point is Not applicable. and the boiling point is < 0 C.