Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
Isopropylamine anhydrous commonly used chemical for the synthesis and / or formulation of industrial products; provided that the product has been supplied after confirmation of compliance with the strictly controlled conditions specified in art. 18 of the reach regulation (ec) no. 1907/2006, this product shall be used as an intermediate in accordance with this regulation. recommended use: industrial chemicals.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS02
GHS05
GHS06
GHS07
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H224: Extremely flammable liquid and vapour.
- H311: Toxic in contact with skin.
- H331: Toxic if inhaled.
- H301: Toxic if swallowed.
- H335: May cause respiratory irritation.
- H314: Causes severe skin burns and eye damage.
- H402: Harmful to aquatic life.
Precautionary Statements
- P280: Wear protective gloves, protective clothing and eye protection or face protection.
- P271: Use only outdoors or in a well-ventilated area.
- P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P243: Take action to prevent static discharges.
- P241: Use explosion-proof electrical, ventilating and lighting equipment.
- P273: Avoid release to the environment.
- P260: Do not breathe dust/gas/mist/vapours.
- P264: Wash contaminated body parts thoroughly after handling.
- P270: Do not eat, drink or smoke when using this product.
- P242: Use non-sparking tools.
- P240: Ground and bond container and receiving equipment.
- P310: Immediately call a POISON CENTER or physician.
- IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- IF INHALED: Remove person to fresh air and keep comfortable for breathing.
- IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
- IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
- In case of fire: Use water spray, dry powder, foam or carbon dioxide for extinction.
- Store in a well-ventilated place. Keep cool.
- P233: Keep container tightly closed.
- P405: Store locked up.
- P501: Dispose of contents and container to hazardous or special waste collection point.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
BASF SE
global supplier
67056 Ludwigshafen GERMANY
DE
+49 621 60-0
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Emergency Contact
+49 180 2273-112
DE
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
substanceGeneral Composition
Chemical nature amine
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Isopropylamine EC: 200-860-9 | 75-31-0 | 99.5-100% | ⚠️ Hazardous |
| Diisopropylamine EC: 203-558-5 | 108-18-9 | 0.1% | ⚠️ Hazardous |
| Ammonia, aqueous solution EC: 215-647-6 | 1336-21-6 | 0.1% | ⚠️ Hazardous |
Composition Notes
For the classifications not written out in full in this section the full text can be found in section 16.
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Keep patient calm, remove to fresh air, seek medical attention. Immediately administer a corticosteroid from a controlled/metered dose inhaler.
🖐️ Skin Contact
Immediately wash thoroughly with plenty of water, apply sterile dressings, consult a skin specialist.
👁️ Eye Contact
Immediately wash affected eyes for at least 15 minutes under running water with eyelids held open, consult an eye specialist.
🍽️ Ingestion/Swallowing
Do not induce vomiting. Immediately rinse mouth and then drink 200-300 ml of water, seek medical attention.
🚨 Immediate Medical Attention Required
Treat according to symptoms (decontamination, vital functions), no known specific antidote.
Medical Treatment
Treat according to symptoms (decontamination, vital functions)
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🧤 Hand Protection
Chemical resistant protective gloves (EN ISO 374-1) Suitable materials also with prolonged, direct contact (Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN ISO 374-1): Polyethylene-Laminate (PE laminate) - ca. 0.1 mm coating thickness Suitable materials for short-term contact (recommended: At least protective index 2, corresponding > 30 minutes of permeation time according to EN ISO 374-1) butyl rubber (butyl) - 0.7 mm coating thickness Supplementary note: The specifications are based on tests, literature data and information of glove manufacturers or are derived from similar substances by analogy. Due to many conditions (e.g. temperature) it must be considered, that the practical usage of a chemical-protective glove in practice may be much shorter than the permeation time determined through testing.
👁️ Eye Protection
Tightly fitting safety goggles (cage goggles) (e.g. EN 166) and face shield.
😷 Respiratory Protection
Wear respiratory protection if ventilation is inadequate. Respiratory protection in case of vapour/aerosol release. Suitable respiratory protection for higher concentrations or long-term effect: Self-contained breathing apparatus. Suitable respiratory protection for lower concentrations or short-term effect: Combination filter for gases/vapours of organic compounds and solid and liquid particles (f.e. EN 14387 Type A-P2)
🦺 Skin/Body Protection
chemical-protection suit (f.e. according to EN 14605)
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
UN1221
📦 Proper Shipping Name
ISOPROPYLAMINE
⚠️ Transport Hazard Class
3, 8
📋 Packing Group
I
✈️ IATA Air Transport Precautions
None known
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for Isopropylamine anhydrous?
The signal word for this substance is "danger".
What is the physical form of Isopropylamine anhydrous?
Isopropylamine anhydrous is a liquid with colourless to yellow color. It has amine-like odor.
What is Isopropylamine anhydrous used for?
Chemical for the synthesis and / or formulation of industrial products; Provided that the product has been supplied after confirmation of compliance with the strictly controlled conditions specified in Art. 18 of the REACH Regulation (EC) No. 1907/2006, this product shall be used as an intermediate in accordance with this Regulation. Recommended use: industrial chemicals
What are the hazard statements for Isopropylamine anhydrous?
This substance has 7 hazard statements: H224: Extremely flammable liquid and vapour. H311: Toxic in contact with skin. H331: Toxic if inhaled. H301: Toxic if swallowed. H335: May cause respiratory irritation. H314: Causes severe skin burns and eye damage. H402: Harmful to aquatic life.
What is the melting point of Isopropylamine anhydrous?
The melting point is < -90 C (1.013,25 hPa) and the boiling point is 32 C (1.013 hPa).