NextSDS Logo
Is

Isopropylamine

DANGER Liquid SDS/MSDS

Chemical Product Identification & Regulatory Data

Official chemical identifiers, CAS numbers, and regulatory compliance information

Basic Product Information

Product Name
Isopropylamine
Product Code
A15044
Chemical Name
2-aminopropane isopropylamine 612-007-00-1

Regulatory Identifiers

CAS Number

Chemical Abstracts Service registry number - unique identifier for chemical substances

EC Number

European Community number - used for regulatory compliance in EU/EEA

Uses Information

Overview

Isopropylamine (CAS: 75-31-0 ) .

Manage Your Safety Data Sheets

Organize and access your chemical safety data with ease.

GHS Hazard Classification & Safety Warnings

Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications

Classification Status

Classified

Signal Word

danger (Danger)

Hazard Classifications

Flam. Liq. Category 1 H224
Skin Irrit. Category 2 H315
Eye Irrit. Category 2A H319
STOT SE Category 3 H335

GHS Hazard Pictograms & Safety Symbols

GHS02 GHS Hazard Pictogram: Flammable hazard - Fire risk materials including gases, liquids, and solids

GHS02

GHS07 GHS Hazard Pictogram: Health hazard warning - Materials harmful to health including irritants and sensitizers

GHS07

GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions

Hazard Statements

  • H224: Extremely flammable liquid and vapor.
  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.
  • H335: May cause respiratory irritation.

Precautionary Statements

  • P210: Keep away from heat/sparks/open flames/hot surfaces. No smoking.
  • P240: Ground/bond container and receiving equipment.
  • P261: Avoid breathing dust/fume/gas/mist/vapors/spray
  • P280: Wear protective gloves / eye protection / face protection.
  • P303+P361+P353: If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
  • P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
  • P305+P351+P338: If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P405: Store locked up.
  • P501: Dispose of contents/container in accordance with local/regional/national/international regulations.

Chemical Manufacturers & Supply Chain

Authorized suppliers, manufacturers, and distribution network information

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc. company logo - Safety Data Sheet supplier organization

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc.

manufacturer

📍

30 Bond Street, Ward Hill, MA 01835-8099

🌍

US

📞

800-343-0660

📠

800-322-4757

24/7 Emergency Response & Poison Control

Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies

Emergency Contact

📞

(800) 343-0660

🕒

During normal business hours (Monday-Friday, 8am-7pm EST)

Carechem 24

📞

(866) 928-0789

🕒

After normal business hours

Chemical Composition & Hazardous Ingredients

Detailed component analysis, concentration ranges, and hazardous substance identification

Product Type

substance

General Composition

Substances

Chemical Components & Hazardous Substances

Chemical Name CAS Number Concentration Hazardous
2-aminopropane isopropylamine 612-007-00-1
EC: 200-860-9
75-31-0 100% ✓ Non-hazardous

Emergency First Aid Measures

Critical first aid procedures for chemical exposure incidents and medical emergencies

🫁 Inhalation Exposure

Supply fresh air. If required, provide artificial respiration. Keep patient warm.

🖐️ Skin Contact

Immediately wash with water and soap and rinse thoroughly.

Symptoms:

Causes skin irritation.

👁️ Eye Contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Symptoms:

Causes serious eye irritation.

🍽️ Ingestion/Swallowing

Seek medical treatment.

Related Chemical Substances & Alternative Products

Similar chemicals with comparable safety profiles and industrial applications

Technical Specifications & Material Properties

Physical state, chemical properties, melting point, boiling point, and material characteristics

📊 Solubility In Water
Fully miscible
💧 Solubility
Fully miscible
📊 Softening Point
Not available
📊 Freezing Point
Not available
🧪 Ph
Not determined.
📊 Molecular Weight
Not available
📊 Cloud Point
Not available
📊 Physical State Data
liquid
📊 Solubility In Fat
Not available
🔥 Flash Point
-32 ℃ (-26 °F)
Critical Property
👃 Odor
Amine-like
📊 Kinematic Viscosity
Not determined.
🔥 Flammability
Not applicable.
🧪 Physical State
Liquid
Critical Property
📊 Metal Corrosion
Not available
💨 Vapor Pressure
637 hPa (478 mm Hg)
📊 Vapor Density
Not determined.
💨 Evaporation Rate
Not determined.
📊 Crystallisation Point
Not available
🎨 Colour
Not available
📊 Colour Intensity
Not available
💨 Boiling Point
33-34 ℃ (91-93'ºF)
Critical Property
📊 Auto Ignition Temperature
403 ℃ (757 ºF)
📊 Relative Evaporation Rate
Not available
📊 Lower Explosive Limit
2.3 Vol %
📊 Form
Liquid
📊 Solidification Point
Not available
👁️ Appearance
Not available
📊 Odor Threshold
Not determined.
📊 Upper Explosive Limit
10.4 Vol %
📊 State Under Standard Conditions
Not available
📊 Bulk Density
Not available
🧊 Melting Point
-101 ℃ (-150 °F)
Critical Property
📊 Decomposition Temperature
Not determined.
📊 Voc Content
Not available
⚖️ Density
0.691 g/cm3 (5.766 lbs/gal)
Critical Property
📊 Partition Coefficient
Not determined.
📊 Properties Status
Not available
📊 Relative Density
Not determined.
📊 Explosive Limits
Not available
📊 Dynamic Viscosity
Not determined.

Exposure Controls & Personal Protective Equipment (PPE)

Occupational exposure limits, engineering controls, and required safety equipment

🏭 Engineering Controls

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

🧤 Hand Protection

Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Material of gloves Fluorocarbon rubber (Viton). Penetration time of glove material (in minutes) Not determined 60. Glove thickness 0.7 mm.

👁️ Eye Protection

Safety glasses.

😷 Respiratory Protection

Use suitable respirator when high concentrations are present. Recommended filter device for short term use: Use a respirator with multi-purpose combination (US) or type ABEK (EN 14387) as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. Only use equipment tested and approved under appropriate government standards such as NIOSH (USA) or CEN (EU).

🦺 Skin/Body Protection

Protective work clothing.

Transportation & Shipping Information

UN numbers, shipping names, transport classes, and regulatory transport requirements

🏷️ UN Number

UN1221

📦 Proper Shipping Name

Isopropylamine

⚠️ Transport Hazard Class

3

📋 Packing Group

I

Chemical Safety FAQ & Common Questions

Most frequently asked questions about safety, handling, storage, and regulatory compliance

What is the hazard signal word for Isopropylamine?

The signal word for this substance is "danger".

What is the physical form of Isopropylamine?

Isopropylamine is a liquid . It has amine-like odor.

What is the solubility of Isopropylamine?

Fully miscible

What are the hazard statements for Isopropylamine?

This substance has 4 hazard statements: H224: Extremely flammable liquid and vapor. H315: Causes skin irritation. H319: Causes serious eye irritation. H335: May cause respiratory irritation.

What is the melting point of Isopropylamine?

The melting point is -101 ℃ (-150 °F) and the boiling point is 33-34 ℃ (91-93'ºF).