Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Unique Formula Identifier - for poison centres and emergency response
Uses Information
Overview
EBECRYL 416 RADIATION CURING RESINS is a liquid substance commonly used coatings and inks.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS07
GHS08
GHS09
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H351: Suspected of causing cancer.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H317: May cause an allergic skin reaction.
- H400: Very toxic to aquatic life.
- H410: Very toxic to aquatic life with long lasting effects.
Precautionary Statements
- P201: Obtain special instructions before use.
- P264: Wash face, hands and any exposed skin thoroughly after handling.
- P280: Wear protective gloves/protective clothing/eye protection/face protection.
- P261: Avoid breathing dust/fume/gas/mist/vapours/spray.
- P272: Contaminated work clothing should not be allowed out of the workplace.
- P273: Avoid release to the environment.
- IF exposed or concerned: Get medical advice/attention.
- IF ON SKIN: Wash with plenty of soap and water.
- P321: Specific treatment (see supplemental first aid instructions on this label).
- Take off contaminated clothing and wash it before reuse.
- IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- If eye irritation persists: Get medical advice/attention.
- If skin irritation or rash occurs: Get medical advice/attention.
- P391: Collect spillage.
- P405: Store locked up.
- P501: Dispose of contents/container in accordance with local, regional, national, and international regulations as applicable.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
Allnex Belgium SA/NV
national supplier
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Carechem 24
+44 (0) 1235 239 670
GB
24 hours/day
For emergency only involving spill, leak, fire, exposure or accident call
Carechem 24
+44 (0) 1235 239 671
GB
24 hours/day
For emergency only involving spill, leak, fire, exposure or accident call
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
MixtureChemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Trimethylolpropane triacrylate EC: 239-701-3 | 15625-89-5 | 41% | ⚠️ Hazardous |
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Remove to fresh air. If breathing is difficult, give oxygen. Obtain medical advice if there are persistent symptoms.
🖐️ Skin Contact
Remove contaminated clothing and shoes without delay. Wash immediately with plenty of water. Do not reuse contaminated clothing without laundering. Get medical attention if pain or irritation persists after washing or if signs and symptoms of overexposure appear.
👁️ Eye Contact
Rinse immediately with plenty of water for at least 15 minutes. Obtain medical advice if there are persistent symptoms.
🍽️ Ingestion/Swallowing
If swallowed, call a physician immediately. Only induce vomiting at the instruction of a physician. Never give anything by mouth to an unconscious person.
🚨 Immediate Medical Attention Required
Not applicable.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Where this material is not used in a closed system, good enclosure and local exhaust ventilation should be provided to control exposure when spraying or curing at elevated temperatures.
🧤 Hand Protection
Wear protective gloves. Recommendations are listed below. Other protective materials may be used based on user's own risk assessment. Barrier creams may help to protect the exposed areas of the skin, they should however not be applied once exposure has occurred. Replace gloves immediately when torn or any change in appearance (dimension, color, flexibility etc.) is noticed. The selected protective gloves have to satisfy the specifications of EU Regulation (EC) 2016/425 and standard EN ISO 374-1:2016. Gloves for repeated or prolonged exposure - non exhaustive list: Nitrile rubber (NBR), thickness: > 0.56 mm, break through time: up to 480 m. Gloves for short term exposure/splash protection - non exhaustive list: Nitrile rubber (NBR), thickness: 0.1 mm, break through time: up to 30 min. The chemical resistance depends on the type of product and amount of product on the glove. Therefore gloves need to be changed when in contact with chemicals. Not suitable gloves - non exhaustive list: Latex gloves. Due to many conditions (e.g. temperature, abrasion) the practical usage of a chemical protective glove in practice may be much shorter than the permeation time determined through testing.
👁️ Eye Protection
Wear eye/face protection such as chemical splash proof goggles or face shield. Eyewash equipment and safety shower should be provided in areas of potential exposure.
😷 Respiratory Protection
For operations where inhalation exposure can occur use an approved respirator. Recommendations are listed below. Other protective respiratory equipment may be used based on user's own risk assessment. Recommended: Full Face Mask with organic vapor cartridge, Type A filter (BP >65C).
🦺 Skin/Body Protection
Avoid skin contact. Wear impermeable gloves and suitable protective clothing. Barrier creams may be used in conjunction with the gloves to provide additional skin protection.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
UN3082
📦 Proper Shipping Name
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
⚠️ Transport Hazard Class
9
📋 Packing Group
III
🚛 ADR Transport Precautions
Protect against external heat sources higher than +40C.
🚢 IMDG Maritime Transport Precautions
Protect against external heat sources higher than +40C.
✈️ IATA Air Transport Precautions
Protect against external heat sources higher than +40C.
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for EBECRYL 416 RADIATION CURING RESINS?
The signal word for this substance is "warning".
What is the physical form of EBECRYL 416 RADIATION CURING RESINS?
EBECRYL 416 RADIATION CURING RESINS is a liquid appearing as liquid with yellowish color. It has odourless odor.
What is EBECRYL 416 RADIATION CURING RESINS used for?
Coatings and Inks
What are the hazard statements for EBECRYL 416 RADIATION CURING RESINS?
This substance has 6 hazard statements: H351: Suspected of causing cancer. H315: Causes skin irritation. H319: Causes serious eye irritation. H317: May cause an allergic skin reaction. H400: Very toxic to aquatic life. H410: Very toxic to aquatic life with long lasting effects.