NextSDS Logo
Safety Data Sheet EN

2-Hydroxyethyl acrylate

CAS 818-61-1
EC 212-454-9

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
2-Hydroxyethyl acrylate
Product Code
B24815

Regulatory Identifiers

CAS Number
818-61-1 Check regulations →
EC Number
212-454-9 Check regulations →

Identified Uses

Scientific research and development

Uses advised against

No further relevant information available.

Manufacturers & Suppliers

Alfa Aesar GmbH & Co.KG logo

Alfa Aesar GmbH & Co.KG

manufacturer

Zeppelinstr. 7b, 76185 Karlsruhe / Germany

+49 (0) 721 84007 280

http://www.alfa.com

Emergency Contacts

Product safety

+4049 (0) 7275 988687-0

Carechem 24

+44 (0) 1235 239 670

Poison Information Center Mainz

+49(0)6131/19240

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Acute Tox. Cat. 3 H311
Skin Corr. Cat. 1B H314
Aquatic Acute Cat. 1 H400
Skin Sens. Cat. 1 H317

GHS Pictograms

GHS06 - Acute toxicity

GHS06

GHS05 - Corrosive

GHS05

GHS09 - Environmental hazard

GHS09

Hazard Statements

H311 Toxic in contact with skin.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H400 Very toxic to aquatic life.

Precautionary Statements

P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P303+P361+P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P361 Remove/Take off immediately all contaminated clothing.
P405 Store locked up.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Chemical Name CAS Number Concentration Hazardous
2-Hydroxyethyl acrylate EC: 212-454-9 818-61-1 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist. Seek immediate medical advice.

Symptoms: In case of irregular breathing or respiratory arrest.

Skin contact

Instantly wash with water and soap and rinse thoroughly. Seek immediate medical advice.

Symptoms: No further relevant information available.

Eye contact

Rinse opened eye for several minutes under running water. Then consult doctor. Seek medical treatment.

Symptoms: Rinse opened eye for several minutes under running water.

Ingestion

No further relevant information available.

Symptoms: No further relevant information available.

Immediate Medical Attention

Seek immediate medical advice.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

Hands

Use breathing protection with high concentrations. Check protective gloves prior to each use for their proper condition. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. Impervious gloves

Eyes

Tightly sealed safety glasses. Full face protection

Respiratory

Use breathing protection with high concentrations.

Skin/Body

Protective work clothing. DE/E

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Partition Coefficient
Not determined.
Appearance
Colourless
Relative Evaporation Rate
---
Solubility In Water
Fully miscible
Vapor Density
Not determined.
Colour Intensity
---
Decomposition Temperature
Not determined
Bulk Density
---
Physical State Data
liquid
Density
1,106 g/cm3
Molecular Weight
---
Relative Density
Not determined.
Explosive Limits
---
Flammability
Not applicable.
Boiling Point
192 °℃
Solubility
Fully miscible
Vapor Pressure
Not determined.
Cloud Point
---
Odor
Pungent
Evaporation Rate
Not determined.
Flash Point
101 ℃
Auto Ignition Temperature
Not determined
Upper Explosive Limit
Not determined
Ph
Not determined.
Dynamic Viscosity
Not determined.
Lower Explosive Limit
Not determined
Metal Corrosion
---
Freezing Point
---
Colour
Colourless
Crystallisation Point
---
Physical State
Liquid
Odor Threshold
Not determined.
Melting Point
<- 60 ℃
Solidification Point
---
State Under Standard Conditions
---
Softening Point
---
Properties Status
---
Voc Content
---
Form
Liquid
Solubility In Fat
---
Kinematic Viscosity
Not determined.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN2927
Shipping Name
TOXIC LIQUID, CORROSIVE, ORGANIC, N.O.S. (2-Hydroxyethyl acrylate)
Transport Class
6.1
Packing Group
II
ADR

Warning: Toxic substances. 68

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for 2-Hydroxyethyl acrylate?

The signal word is danger.

What is the physical form of 2-Hydroxyethyl acrylate?

2-Hydroxyethyl acrylate is a liquid appearing as colourless with colourless color. It has pungent odor.

What is the solubility of 2-Hydroxyethyl acrylate?

Fully miscible

What is 2-Hydroxyethyl acrylate used for?

Scientific research and development

What are the hazard statements for 2-Hydroxyethyl acrylate?

This substance has 4 hazard statements:

  • H311: Toxic in contact with skin.
  • H314: Causes severe skin burns and eye damage.
  • H317: May cause an allergic skin reaction.
  • H400: Very toxic to aquatic life.

What is the melting point of 2-Hydroxyethyl acrylate?

The melting point is <- 60 ℃ and the boiling point is 192 °℃.