Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
BioMed Clear Resin is a light purple transparent liquid substance commonly used for use in formlabs sla printers.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS07
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H315: Causes skin irritation
- H319: Causes serious eye irritation
- H317: May cause an allergic skin reaction
- H335: May cause respiratory irritation
Precautionary Statements
- P264: Wash skin thoroughly after handling
- P280: Wear protective gloves/protective clothing/eye protection/face protection
- P261: Avoid breathing dust/fume/gas/mist/vapors/spray
- P272: Contaminated work clothing must not be allowed out of the workplace
- P271: Use only outdoors or in a well-ventilated area
- P302+P352: IF ON SKIN: Wash with plenty of soap and water
- P332+P313: If skin irritation occurs: Get medical advice/attention
- P362: Take off contaminated clothing and wash it before reuse
- P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
- P337+P313: If eye irritation persists: Get medical advice/attention
- P333+P313: If skin irritation or rash occurs: Get medical advice/attention
- P363: Wash contaminated clothing before reuse
- P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing
- P403+P233: Store in a well-ventilated place. Keep container tightly closed
- P405: Store locked up
- P501: Dispose of contents/container in accordance with local/regional/national regulations
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
Formlabs Ohio, Inc
manufacturer
27800 Lemoyne Rd. Suite O Millbury, Ohio 43447
US
+1 419-837-9783
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
CHEMTREC
1-800-424-9300
US
24/7
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Esterification products of 4,4'-isopropylidenediphenol, ethoxylated and 2methylprop-2-enoic acid | Trade Secret | 50-70% | ✓ Non-hazardous |
| Urethane dimethacrylate | Trade Secret | 25-45% | ✓ Non-hazardous |
| Methacrylate Monomer(s) | Trade Secret | 7-10% | ✓ Non-hazardous |
| Photoinitiator(s) | Trade Secret | 2% | ✓ Non-hazardous |
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
If inhaled, remove person to fresh air and place in a position comfortable for breathing. Keep person at rest. If breathing is difficult, administer oxygen. If breathing has stopped, provide artificial respiration. If experiencing respiratory symptoms, seek medical advice/attention.
Symptoms:
Inhalation may have adverse effects on the respiratory tract. Symptoms may include cough, breathing difficulties, sore throat and inflammation of the mucous membrane lining the respiratory tract.
🖐️ Skin Contact
Remove contaminated clothing and shoes. Rinse skin with copious amounts of water [shower] for several minutes. Launder contaminated clothing before reuse. If symptoms develop or persist, seek medical advice/attention.
Symptoms:
Skin contact may result in redness, pain, burning and inflammation. Dermal exposure may cause an allergic skin reaction. Symptoms may include irritation, redness, pain, rash, inflammation, itching, burning and dermatitis.
👁️ Eye Contact
Rinse eyes with plenty of water for several minutes. Remove contact lenses if present and easy to do so. Protect unexposed eye. If symptoms develop or persist, seek medical advice/attention.
Symptoms:
Eye contact may result in irritation, redness, pain, inflammation, itching, burning and tearing.
🍽️ Ingestion/Swallowing
If swallowed, DO NOT induce vomiting unless told to do so by a physician or poison control center. Rinse mouth with water. Never give anything by mouth to an unconscious person. If spontaneous vomiting occurs, place on the left side with head down to prevent aspiration of liquid into the lungs. If symptoms develop or persist, seek medical advice/attention.
Medical Treatment
Treat symptomatically.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Emergency eye wash stations and safety showers should be available in the immediate vicinity of use or handling. Provide adequate ventilation to maintain the airborne concentrations of vapor, mists, and/or dusts below the applicable workplace exposure limits, while observing recognized national standards (or equivalent).
🧤 Hand Protection
Chemical resistant, impervious gloves approved by the appropriate standards. Gloves must be inspected prior to use. Avoid skin contact with used gloves. Appropriate techniques should be used to remove used gloves and contaminated clothing.
👁️ Eye Protection
Safety glasses or goggles. Use eye protection equipment that has been tested and approved by recognized national standards (or equivalent).
😷 Respiratory Protection
If engineering controls do not maintain airborne concentrations below the applicable workplace exposure limits, or to an acceptable level (if exposure limits have not been established), a respirator approved by recognized national standards (or equivalent) must be worn.
🦺 Skin/Body Protection
Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product. Ensure that all personal protective equipment is approved by recognized national standards (or equivalent).
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
UN 3082
📦 Proper Shipping Name
Environmentally hazardous liquid, N.O.S. Methacrylate Polymer
⚠️ Transport Hazard Class
9
📋 Packing Group
III
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for BioMed Clear Resin?
The signal word for this substance is "warning".
What is the physical form of BioMed Clear Resin?
BioMed Clear Resin is a liquid appearing as light purple transparent liquid with light purple color. It has characteristic acrylate odor.
What is BioMed Clear Resin used for?
For use in Formlabs SLA Printers
What are the hazard statements for BioMed Clear Resin?
This substance has 4 hazard statements: H315: Causes skin irritation H319: Causes serious eye irritation H317: May cause an allergic skin reaction H335: May cause respiratory irritation