Micro-Sorb 30/60 LVM

remove to fresh air and seek medical attention.

Symptoms: difficulties occur after dust has been inhaled

Wash thoroughly with soap and water.

Wash affected eyes for at least 15 minutes under running water with eyelids held open.

Rinse mouth and then drink plenty of water.

Chemical resistant protective gloves (EN 374) Suitable materials also with prolonged, direct contact (Recommended: Protective index 6, corresponding > 480 minutes of permeation time according to EN 374): e.g. nitrile rubber (0.4 mm), chloroprene rubber (0.5 mm), polyvinylchloride (0.7 mm) and other Supplementary note: The specifications are based on tests, literature data and information of glove manufacturers or are derived from similar substances by analogy. Due to many conditions (e.g. temperature) it must be considered, that the practical usage of a chemical-protective glove in practice may be much shorter than the permeation time determined through testing. Manufacturer's directions for use should be observed because of great diversity of types.

Safety glasses with side-shields (frame goggles) (e.g. EN 166)

Suitable respiratory protection for lower concentrations or short-term effect: Particle filter with medium efficiency for solid and liquid particles (e.g. EN 143 or 149, Type P2 or FFP2)

Due to the colouring properties of the product closed work clothes should be used, to avoid stains during manipulation.

No hazardous reactions when stored and handled according to instructions.

vegetable oils, unsaturated organic compounds

No hazardous decomposition products if stored and handled as prescribed/indicated.