Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- QSR SR-35 Soluble Support Material
- Product Code
- SDS-400702 EN A
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Additive manufacturing
Uses advised against
No information available
Manufacturers & Suppliers
Stratasys Corporate headquarters
manufacturer
9600 West 76th Street Suite #108, Eden Prairie, MN 55344, United States
+1 952-937-3000
Emergency Contacts
Americas
+1-352-323-3500
24/7
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Not a dangerous substance or mixture according to the Globally Harmonized System (GHS).
Notes
Not a dangerous substance or mixture according to the Globally Harmonized System (GHS).
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air.
Wash skin with soap and water when in contact with molten residues.
Rinse thoroughly with plenty of water for at least 15 minutes, lifting lower and upper eyelids. Consult a physician.
Drink plenty of water. Do not induce vomiting without medical advice. Call a physician immediately.
Immediate Medical Attention
Call a physician immediately.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam. Water. Carbon dioxide (CO2). Dry chemical. Alcohol resistant foam.
None known.
None known.
Firefighter Protection
Firefighters should wear self-contained breathing apparatus and full firefighting turnout gear. Use personal protection equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment as required. Avoid contact with skin and eyes. Remove all sources of ignition. Sweep up to prevent slipping hazard.
Do not flush into surface water or sanitary sewer system. Keep out of waterways.
Pick up and transfer to properly labeled containers.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use personal protection equipment. Avoid contact with skin and eyes, when handling melted filament. If small particles are generated during further processing, handling, or by other means, combustible dust concentrations in air may form. Use respirator.
Keep containers tightly closed in a dry, cool and well-ventilated place.
If small particles are generated during further processing, handling, or by other means, combustible dust concentrations in air may form.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
If dust is generated during further processing provide exhaust ventilation.
Goggles. Safety glasses with side-shields.
Minimize dust generation and accumulation. Wear respiratory protection.
Impervious clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
None under normal use conditions.
None under normal processing.
Excessive heat. To avoid thermal decomposition, do not overheat.
Oxidizing agent. Strong bases.
Burning produces obnoxious and toxic fumes. Carbon monoxide. Carbon dioxide (CO2). Aldehydes.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of in accordance with local regulations. Dispose of waste in accordance with environmental legislation.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for QSR SR-35 Soluble Support Material?
The signal word is no signal word.
What is the physical form of QSR SR-35 Soluble Support Material?
QSR SR-35 Soluble Support Material is a solid appearing as monofilament with light yellow color. It has no information available odor.
What is the solubility of QSR SR-35 Soluble Support Material?
No data available
What is QSR SR-35 Soluble Support Material used for?
Additive manufacturing
What are the hazard statements for QSR SR-35 Soluble Support Material?
This substance has 1 hazard statement:
- The product contains no substances which at their given concentration, are considered to be hazardous to health.
What is the melting point of QSR SR-35 Soluble Support Material?
The melting point is Not applicable and the boiling point is Not applicable.