Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
KRYLON Farm & Implement Paint John Deere Yellow commonly used paint or paint related material..
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS02
GHS07
GHS08
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H226: Flammable liquid and vapor.
- H304: May be fatal if swallowed and enters airways.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H335: May cause respiratory irritation.
- H336: May cause drowsiness or dizziness.
- H351: Suspected of causing cancer.
- Suspected of damaging fertility or the unborn child.
- Causes damage to organs through prolonged or repeated exposure. (lungs)
Precautionary Statements
- Read label before use.
- Keep out of reach of children.
- If medical advice is needed, have product container or label at hand.
- Obtain special instructions before use.
- Do not handle until all safety precautions have been read and understood.
- Wear protective gloves, protective clothing and eye or face protection.
- Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- Use explosion-proof electrical, ventilating or lighting equipment.
- Use non-sparking tools.
- Take action to prevent static discharges.
- Use only outdoors or in a well-ventilated area.
- Do not breathe vapor.
- Do not eat, drink or smoke when using this product.
- Wash thoroughly after handling.
- Contaminated work clothing must not be allowed out of the workplace.
- IF exposed or concerned: Get medical advice or attention.
- IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor if you feel unwell.
- IF SWALLOWED: Immediately call a POISON CENTER or doctor. Do NOT induce vomiting.
- IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. Wash contaminated clothing before reuse.
- IF ON SKIN: Wash with plenty of water. If skin irritation or rash occurs: Get medical advice or attention.
- IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice or attention.
- Store locked up.
- Store in a well-ventilated place. Keep container tightly closed. Keep cool.
- Dispose of contents and container in accordance with all local, regional, national and international regulations.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
Krylon Products Group
manufacturer
101 W. Prospect Avenue Cleveland, OH 44115
US
(800) 457-9566
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Krylon Products Group
(216) 566-2917
US
US / Canada. Also serves as Transportation Emergency Telephone Number.
SETIQ
01-800-00-214-00
MX
24 hours / 365 days a year
Mexico. Also serves as Transportation Emergency Telephone Number.
SETIQ
(52) 55-5559-1588
MX
24 hours / 365 days a year
Mexico. Also serves as Transportation Emergency Telephone Number.
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
MixtureChemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Light Aliphatic Hydrocarbon | 64742-47-8 | 10-25% | ⚠️ Hazardous |
| Titanium Dioxide | 13463-67-7 | 10-25% | ⚠️ Hazardous |
| Talc | 14807-96-6 | 5% | ⚠️ Hazardous |
| Xylene, mixed isomers | 1330-20-7 | 3% | ⚠️ Hazardous |
| Methyl Ethyl Ketoxime | 96-29-7 | 2.9% | ⚠️ Hazardous |
| Hydrotreated Heavy Petroleum Naphtha | 64742-48-9 | 1% | ⚠️ Hazardous |
| Methyl Isobutyl Ketone | 108-10-1 | 1% | ⚠️ Hazardous |
| Ethylbenzene | 100-41-4 | 1% | ⚠️ Hazardous |
| Zirconium 2-Ethylhexanoate | 22464-99-9 | 0.3% | ⚠️ Hazardous |
| Med. Aliphatic Hydrocarbon Solvent | 64742-88-7 | 0.3% | ⚠️ Hazardous |
| Calcium 2-Ethylhexanoate | 136-51-6 | 0.3% | ⚠️ Hazardous |
Composition Notes
Any concentration shown as a range is to protect confidentiality or is due to batch variation.
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Remove victim to fresh air and keep at rest in a position comfortable for breathing. If it is suspected that fumes are still present, the rescuer should wear an appropriate mask or self-contained breathing apparatus. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. Get medical attention. If necessary, call a poison center or physician. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.
Symptoms:
Can cause central nervous system (CNS) depression. May cause drowsiness or dizziness. May cause respiratory irritation. Adverse symptoms may include the following: respiratory tract irritation, coughing, nausea or vomiting, headache, drowsiness/fatigue, dizziness/vertigo, unconsciousness, reduced fetal weight, increase in fetal deaths, skeletal malformations.
🖐️ Skin Contact
Wash with plenty of soap and water. Remove contaminated clothing and shoes. Wash contaminated clothing thoroughly with water before removing it, or wear gloves. Continue to rinse for at least 10 minutes. Get medical attention. In the event of any complaints or symptoms, avoid further exposure. Wash clothing before reuse. Clean shoes thoroughly before reuse.
Symptoms:
May cause an allergic skin reaction. Adverse symptoms may include the following: irritation, redness, reduced fetal weight, increase in fetal deaths, skeletal malformations.
👁️ Eye Contact
Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10 minutes. Get medical attention.
Symptoms:
Causes serious eye irritation. Adverse symptoms may include the following: pain or irritation, watering, redness.
🍽️ Ingestion/Swallowing
Get medical attention immediately. Call a poison center or physician. Wash out mouth with water. Remove dentures if any. Remove victim to fresh air and keep at rest in a position comfortable for breathing. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Aspiration hazard if swallowed. Can enter lungs and cause damage. Do not induce vomiting. If vomiting occurs, the head should be kept low so that vomit does not enter the lungs. Never give anything by mouth to an unconscious person. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or waistband.
Symptoms:
Can cause central nervous system (CNS) depression. May be fatal if swallowed and enters airways. Adverse symptoms may include the following: nausea or vomiting, reduced fetal weight, increase in fetal deaths, skeletal malformations.
🚨 Immediate Medical Attention Required
Get medical attention. Call a poison center or physician if necessary. Get medical attention immediately if unconscious or for ingestion.
Medical Treatment
No specific treatment.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Use only with adequate ventilation. Use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure to airborne contaminants below any recommended or statutory limits. The engineering controls also need to keep gas, vapor or dust concentrations below any lower explosive limits. Use explosion-proof ventilation equipment.
🧤 Hand Protection
Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary. Considering the parameters specified by the glove manufacturer, check during use that the gloves are still retaining their protective properties. It should be noted that the time to breakthrough for any glove material may be different for different glove manufacturers. In the case of mixtures, consisting of several substances, the protection time of the gloves cannot be accurately estimated.
👁️ Eye Protection
Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts. If contact is possible, the following protection should be worn, unless the assessment indicates a higher degree of protection: chemical splash goggles.
😷 Respiratory Protection
Based on the hazard and potential for exposure, select a respirator that meets the appropriate standard or certification. Respirators must be used according to a respiratory protection program to ensure proper fitting, training, and other important aspects of use.
🦺 Skin/Body Protection
Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product. When there is a risk of ignition from static electricity, wear anti-static protective clothing. For the greatest protection from static discharges, clothing should include anti-static overalls, boots and gloves. Appropriate footwear and any additional skin protection measures should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.
🌍 Environmental Exposure Controls
Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
UN1263
📦 Proper Shipping Name
PAINT
⚠️ Transport Hazard Class
3
📋 Packing Group
III
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for KRYLON Farm & Implement Paint John Deere Yellow?
The signal word for this substance is "danger".
What is the physical form of KRYLON Farm & Implement Paint John Deere Yellow?
KRYLON Farm & Implement Paint John Deere Yellow is a liquid. with yellow. color. It has not available. odor.
What is the solubility of KRYLON Farm & Implement Paint John Deere Yellow?
Not available.
What is KRYLON Farm & Implement Paint John Deere Yellow used for?
Paint or paint related material.
What are the hazard statements for KRYLON Farm & Implement Paint John Deere Yellow?
This substance has 9 hazard statements: H226: Flammable liquid and vapor. H304: May be fatal if swallowed and enters airways. H317: May cause an allergic skin reaction. H319: Causes serious eye irritation. H335: May cause respiratory irritation. H336: May cause drowsiness or dizziness. H351: Suspected of causing cancer. Suspected of damaging fertility or the unborn child. Causes damage to organs through prolonged or repeated exposure. (lungs)
What is the melting point of KRYLON Farm & Implement Paint John Deere Yellow?
The melting point is Not available. and the boiling point is 138C (280.4F).