Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- DUPLI-COLOR Color Spray Quality Paint (glossy)
- Product Code
- 893902 - 893995
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
SU21 Consumer uses: Private households / general public / consumers SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen) PC9a Coatings and paints, thinners, paint removers PROC7 Industrial spraying PROC11 Non industrial spraying Lacquer
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
MOTIP DUPLI GmbH
manufacturer
Kurt Vogelsang Strasse 6 D-74855 Hamersheim
+49/6266/75-0
Emergency Contacts
Emergency Contact
+49 6266-75-310
Mo - Th 08:00 am - 04:00 pm, Fr 08:00 am - 00:30 pm
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Acetone a.r. EC: 200-662-2 | 67-64-1 | 25 - 50% | Yes |
| propaan vloeibar gemaakt EC: 200-827-9 | 74-98-6 | 12.5 - 20% | Yes |
| n-Butane, pure EC: 203-448-7 | 106-97-8 | 12.5 - 20% | Yes |
| Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, aromatics EC: 919-857-5 | --- | 10 - 12.5% | Yes |
| Isobutane (R600a) EC: 200-857-2 | 75-28-5 | 5 - 10% | Yes |
| 2-ethylhexaanzuur EC: 205-743-6 | 149-57-5 | 0.5% | Yes |
The content of Benzene (EINECS-Nr. 200-753-7) in the ingredients is less than 0,1% (Note P Annex 1A 1272/2008 EU), so the classification as carcinogen need not to apply. For the wording of the listed hazard phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Drink plenty of water and provide fresh air. Call for a doctor immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
DUPLI-COLOR Color Spray Quality Paint (silk mat)
---
SPRAY PAINT
---
DUPLI-COLOR Engine Enamel with Ceramic, Ford Semi-Gloss Black
---
Aerosol NC Industrielack uni glanz, diff colors
---
Aerosol NC Industrielack uni glanz, diff colors
---
Aerosol NC Industrielack uni glanz, diff colors
---
Motip 2K Clear coat highgloss
---
TRADE SPRAY GLOSS WHITE
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
In case of contact with spray dust protective gloves made of butyl shoud be used (min. 0.4 mm thick), e.g. KCL Camatril, article no. 898 or similar products. Solvent resistant gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: Butyl rubber, BR. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Butyl rubber gloves with a thickness of 0.4 mm are resistant to: Acetone: 480 min, Butyl acetate: 60 min, Ethyl acetate: 170 min, Xylene: 42 min. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles
Filter AX. Not necessary if room is well-ventilated. In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
- Packing Group
- not regulated
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for DUPLI-COLOR Color Spray Quality Paint (glossy)?
The signal word is danger.
What is the physical form of DUPLI-COLOR Color Spray Quality Paint (glossy)?
DUPLI-COLOR Color Spray Quality Paint (glossy) is a aerosol appearing as form: aerosol, colour: according to product specification with according to product specification color. It has characteristic odor.
What is the solubility of DUPLI-COLOR Color Spray Quality Paint (glossy)?
Not miscible or difficult to mix.
What is DUPLI-COLOR Color Spray Quality Paint (glossy) used for?
SU21 Consumer uses: Private households / general public / consumers SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen) PC9a Coatings and paints, thinners, paint removers PROC7 Industrial spraying PROC11 Non industrial spraying Lacquer
What are the hazard statements for DUPLI-COLOR Color Spray Quality Paint (glossy)?
This substance has 4 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
What is the melting point of DUPLI-COLOR Color Spray Quality Paint (glossy)?
The melting point is Undetermined. and the boiling point is Not applicable, as aerosol..