NextSDS Logo
Safety Data Sheet EN

Soudal Flexifoam

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Soudal Flexifoam

Regulatory Identifiers

CAS Number
N/A
REACH No.
Not applicable (mixture)

Identified Uses

polyurethane

Uses advised against

No uses advised against known

Manufacturers & Suppliers

S

SOUDAL N.V.

national supplier

Everdongenlaan 18-20, B-2300 Turnhout

+32 14 42 42 31

S

SOUDAL N.V.

manufacturer

Everdongenlaan 18-20, B-2300 Turnhout

+32 14 42 42 31

Emergency Contacts

BIG

+32 14 58 45 45

24h/24h

EN, FR, DE, NL

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Aerosol Cat. 1 H222
Aerosol Cat. 1 H229
Carc. Cat. 2 H351
Acute Tox. Cat. 4 H332
STOT RE Cat. 2 H373
Eye Irrit. Cat. 2 H319
STOT SE Cat. 3 H335
Skin Irrit. Cat. 2 H315
Resp. Sens. Cat. 1 H334
Skin Sens. Cat. 1 H317

GHS Pictograms

GHS02 - Flammable

GHS02

GHS08 - Serious health hazard

GHS08

GHS07 - Health hazard

GHS07

Hazard Statements

H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H332 Harmful if inhaled.
H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
H335 May cause respiratory irritation.
H351 Suspected of causing cancer.
H373 May cause damage to organs through prolonged or repeated exposure if inhaled.

Precautionary Statements

P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P280 Wear protective gloves, protective clothing and eye protection/face protection.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P410 + P412 Protect from sunlight. Do no expose to temperatures exceeding 50 / 122F.
P501 Dispose of contents/container in accordance with local/regional/national/international regulation.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
tris(2-chloro-1-methylethyl) phosphate EC: 237-158-7 13674-84-5 1 - 25% Yes
polymethylene polyphenyl isocyanate 9016-87-9 25% Yes
propane EC: 200-827-9 74-98-6 1 - 10% Yes
isobutane EC: 200-857-2 75-28-5 1 - 10% Yes
dimethyl ether EC: 204-065-8 115-10-6 1 - 10% Yes
1,3-butadiene --- 0.1% No

(1) For R-phrases and H-statements in full: see heading 16 (2) Substance with a Community workplace exposure limit (10) Subject to restrictions of Annex XVII of Regulation (EC) No. 1907/2006

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove the victim into fresh air. Respiratory problems: consult a doctor/medical service.

Symptoms: Dry/sore throat. Coughing. Irritation of the respiratory tract. Irritation of the nasal mucous membranes. Runny nose. FOLLOWING SYMPTOMS MAY APPEAR LATER: Possible inflammation of the respiratory tract. Risk of lung oedema. Respiratory difficulties.

Skin contact

Wash immediately with lots of water. Take victim to a doctor if irritation persists.

Symptoms: Tingling/irritation of the skin.

Eye contact

Rinse immediately with plenty of water. Do not apply neutralizing agents. Take victim to an ophthalmologist if irritation persists.

Symptoms: Irritation of the eye tissue. Lacrimation.

Ingestion

Rinse mouth with water. Immediately after ingestion: give lots of water to drink. Do not induce vomiting. Consult a doctor/medical service if you feel

Symptoms: No effects known.

Immediate Medical Attention

If applicable and available it will be listed below.

Medical Treatment

If applicable and available it will be listed below.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Use spark-/explosionproof appliances and lighting system. Keep away from naked flames/heat. Keep away from ignition sources/sparks. Measure the concentration in the air regularly. Carry operations in the open/under local exhaust/ventilation or with respiratory protection.

Hands

Gloves. Materials: LDPE (Low Density Poly Ethylene). Breakthrough time: 10 minutes. Thickness: 0.025 mm.

Eyes

Protective goggles.

Respiratory

Wear gas mask with filter type A if conc. in air > exposure limit.

Skin/Body

Head/neck protection. Protective clothing.

Environmental

See headings 6.2, 6.3 and 13

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Melting Point
No data available
Odor Threshold
No data available
Freezing Point
---
Colour
Variable in colour, depending on the composition
Molecular Weight
---
Softening Point
---
Explosive Limits
---
Boiling Point
No data available
Bulk Density
---
Density
900 kg/m3 ; 20
Physical State
Aerosol
Voc Content
---
Auto Ignition Temperature
No data available
Odor
Characteristic odour
Vapor Density
---
Solidification Point
---
Metal Corrosion
---
Vapor Pressure
No data available
Dynamic Viscosity
No data available
Flammability
Extremely flammable aerosol.
Appearance
---
Physical State Data
aerosol
Colour Intensity
---
Ph
No data available
Relative Evaporation Rate
---
Properties Status
---
Relative Density
0.9; 20
Upper Explosive Limit
---
Crystallisation Point
---
State Under Standard Conditions
---
Lower Explosive Limit
---
Form
---
Partition Coefficient
Not applicable (mixture)
Decomposition Temperature
No data available
Solubility In Water
insoluble
Cloud Point
---
Solubility In Fat
---
Evaporation Rate
No data available
Solubility
water ; insoluble organic solvents ; soluble
Kinematic Viscosity
No data available
Flash Point
No data available
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1950
Shipping Name
Aerosols
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Soudal Flexifoam?

The signal word is danger.

What is the physical form of Soudal Flexifoam?

Soudal Flexifoam is a aerosol with variable in colour, depending on the composition color. It has characteristic odour odor.

What is the solubility of Soudal Flexifoam?

water ; insoluble organic solvents ; soluble

What is Soudal Flexifoam used for?

polyurethane

What are the hazard statements for Soudal Flexifoam?

This substance has 10 hazard statements:

  • H222: Extremely flammable aerosol.
  • H229: Pressurised container: May burst if heated.
  • H315: Causes skin irritation.
  • H317: May cause an allergic skin reaction.
  • H319: Causes serious eye irritation.
  • H332: Harmful if inhaled.
  • H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
  • H335: May cause respiratory irritation.
  • H351: Suspected of causing cancer.
  • H373: May cause damage to organs through prolonged or repeated exposure if inhaled.

What is the melting point of Soudal Flexifoam?

The melting point is No data available and the boiling point is No data available.