Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SUPA-FLEX
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Sealant
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS08
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| xylene, mixture of isomers EC: 215-535-7 | 1330-20-7 | 1 - 10% | Yes |
| 3-isocyanatomethyl-3,5,5-trimethylcyclohexyl isocyanate EC: 223-861-6 | 4098-71-9 | 0.1 - 0.5% | Yes |
| methylenediphenyl diisocyanate EC: 247-714-0 | 26447-40-5 | 0.1 - 1% | Yes |
| low boiling point naphtha, unspecified (conc. benzene < 0.1%) EC: 265-199-0 | 64742-95-6 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove the victim into fresh air. Seek medical advice.
Rinse immediately with plenty of water. If irritation persists: seek medical advice.
Rinse immediately with plenty of water. Seek medical advice.
Never give water to an unconscious person. Do not induce vomiting. Seek medical advice.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Polyvalent foam, ABC powder, Carbon dioxide
Gas/vapour spreads at floor level: ignition hazard. Vapour-air mixture is flammable/explosive within the explosion limits.
Cool closed containers with water if they are exposed to the fire. Dilute toxic gases with water spray.
Firefighter Protection
Heat/fire exposure: compressed air/oxygen apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use appropriate containment to avoid environmental contamination
Take up liquid spill in non-combustible absorbent material e.g.: sand, earth, vermiculite; Shovel absorbed substance in closing drums; Carefully collect the spill/leftovers; Take collected spill to manufacturer/competent authority; Clean contaminated surfaces with an excess of water; Wash clothing and equipment after handling
Materials: non-combustible absorbent material e.g.: sand, earth, vermiculite
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Observe very strict hygiene - avoid contact
Keep container tightly closed; Keep out of direct sunlight; Store in a dry area; Keep away from: heat sources, ignition sources
Observe very strict hygiene - avoid contact
Take precautions against electrostatic charges; Keep away from: heat sources, ignition sources
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use only in well ventilated area
Chemically resistant gloves
Safety glasses
In case of insufficient ventilation: respiratory protection with filtertype A
Suitable protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions
heat sources, ignition sources
On burning: release of toxic and corrosive gases/vapours: sulphur oxides, hydrogen chloride, carbon monoxide and carbon dioxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1993
- Shipping Name
- Flammable liquid, n.o.s. (xylenes)
- Transport Class
- 3
- Packing Group
- III
Viscous liquid with a flash point ranging from 23°C to 60°C, which meets the conditions indicated in 2 of ADR, RID and ADNR and in 2 of IMDG not subject to ADR, RID and ADNR and neither to IMDG Code chapters 4, 5, 6.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Labelling in accordance with directives 67/548/EEC and 1999/45/EC
Contains isocyanates. See information supplied by the manufacturer. Contains methylenediphenyl diisocyanate and 3-isocyanatomethyl-3,5,5-trimethylcyclohexyl isocyanate.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for SUPA-FLEX?
The signal word is danger.
What is the physical form of SUPA-FLEX?
SUPA-FLEX is a viscous appearing as viscous with variable in colour color. It has solvent odor.
What is the solubility of SUPA-FLEX?
Insoluble
What is SUPA-FLEX used for?
Sealant
What are the hazard statements for SUPA-FLEX?
This substance has 2 hazard statements:
- H221: Flammable
- H334: May cause sensitisation by inhalation
What is the melting point of SUPA-FLEX?
The melting point is N.D. °C and the boiling point is N.D. °C.