NextSDS Logo
Safety Data Sheet EN

Sikaflex®-953 L15 Part A

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Sikaflex®-953 L15 Part A

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Sealant/adhesive

Manufacturers & Suppliers

S

Sika Schweiz AG

manufacturer

Tüffenwies 16 8048 Zürich

+41 58 436 40 40

Emergency Contacts

Tox Info Suisse

+41(0)44 251 51 51

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
N-[3- (dimethoxymethylsi- lyl)propyl]ethylenediamine Contains: methanol <= 0,5 % EC: 221-336-6 3069-29-2 0.5 - 1% Yes
trimethoxyvinylsilane Contains: tetramethyl orthosilicate <= 0,2 % EC: 220-449-8 2768-02-7 0.1 - 0.5% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air.

Skin contact

Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water.

Eye contact

Remove contact lenses. Keep eye wide open while rinsing.

Ingestion

Do not induce vomiting without medical advice. Rinse mouth with water. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Maintain air concentrations below occupational exposure standards. Ensure adequate ventilation, especially in confined areas.

Hands

Chemical-resistant, impervious gloves complying with an approved standard must be worn at all times when handling chemical products. Reference number EN 374. Follow manufacturer specifications. Butyl rubber/nitrile rubber gloves (> 0,1 mm) Recommended: Butyl rubber/nitrile rubber gloves.

Eyes

Safety glasses

Respiratory

No special measures required.

Skin/Body

Protective clothing (e.g. Safety shoes acc. to EN ISO 20345, long-sleeved working clothing, long trousers). Rubber aprons and protective boots are additionaly recommended for mixing and stirring work.

Environmental

No special environmental precautions required.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Voc Content
---
Density
ca. 1,41 g/cm3 (20 ℃)
Metal Corrosion
---
Appearance
paste
Melting Point
No data available
Lower Explosive Limit
No data available
Physical State
liquid
Form
---
Ph
Not applicable substance/mixture is non-soluble (in water)
Odor Threshold
---
Physical State Data
liquid
Molecular Weight
---
Flammability
No data available
Odor
very faint
Explosive Limits
---
Properties Status
---
Solubility In Fat
---
Freezing Point
---
Partition Coefficient
No data available
Flash Point
> 101 ℃
Dynamic Viscosity
---
Relative Evaporation Rate
---
Boiling Point
No data available
Relative Density
---
Cloud Point
---
Vapor Density
---
State Under Standard Conditions
---
Colour
various
Bulk Density
---
Colour Intensity
---
Solubility In Water
insoluble
Softening Point
---
Decomposition Temperature
No data available
Crystallisation Point
---
Evaporation Rate
---
Solubility
---
Auto Ignition Temperature
No data available
Upper Explosive Limit
No data available
Vapor Pressure
0,01 hPa
Kinematic Viscosity
> 20,5 mm2/s (40 ℃)
Solidification Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Sikaflex®-953 L15 Part A?

The signal word is no signal word.

What is the physical form of Sikaflex®-953 L15 Part A?

Sikaflex®-953 L15 Part A is a liquid appearing as paste with various color. It has very faint odor.

What is Sikaflex®-953 L15 Part A used for?

Sealant/adhesive

What is the melting point of Sikaflex®-953 L15 Part A?

The melting point is No data available and the boiling point is No data available.

Compliance Scanner

Scan your compliance