Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Triclopyr 2-butoxyethylester
- Product Code
- 36538
Regulatory Identifiers
- CAS Number
- 64700-56-7 Check regulations →
Identified Uses
Laboratory chemicals, Manufacture of substances
Manufacturers & Suppliers
Sigma-Aldrich
manufacturer
3050 Spruce Street, SAINT LOUIS MO 63103, USA
+1 800-325-5832
Emergency Contacts
CHEMTREC
+1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-Butoxyethyl [(3,5,6-trichloropyridin-2-yl)oxy]acetate EC: 265-024-8 | 64700-56-7 | --- | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
Wash off with soap and plenty of water. Consult a physician.
Flush eyes with water as a precaution.
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Carbon oxides, nitrogen oxides (NOx), Hydrogen chloride gas
Firefighter Protection
Wear self contained breathing apparatus for fire fighting if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate personnel to safe areas.
Discharge into the environment must be avoided.
Soak up with inert absorbent material
Materials: inert absorbent material
Related Products
Similar products with comparable safety profiles
Triclopyr
CAS: 55335-06-3
Tribenuron-methyl
CAS: 101200-48-0
Chlorpyrifos
CAS: 2921-88-2
Tetramethrin
CAS: 7696-12-0
Parathion-methyl
CAS: 298-00-0
2-(2,4-Dichlorophenoxy)propionic acid
CAS: 120-36-5
Heptachlor-endo-epoxide (trans-, isomer A)
CAS: 28044-83-9
Bis-(2-chloroisopropyl) ether
CAS: 108-60-1
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes. Avoid inhalation of vapour or mist.
Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage.
Normal measures for preventive fire protection.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Handle in accordance with good industrial hygiene and safety practice.
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.
Face shield and safety glasses. Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Complete suit protecting against chemicals. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
no data available
no data available
no data available
no data available
Other decomposition products - no data available. In the event of fire: see section 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed professional waste disposal service to dispose of this material.
Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed professional waste disposal service to dispose of this material.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (2-Butoxyethyl [(3,5,6-trichloropyridin-2-yl)oxy]acetate)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Triclopyr 2-butoxyethylester?
The signal word is warning.
What is the physical form of Triclopyr 2-butoxyethylester?
Triclopyr 2-butoxyethylester is a liquid appearing as liquid . It has no data available odor.
What is Triclopyr 2-butoxyethylester used for?
Laboratory chemicals, Manufacture of substances
What are the hazard statements for Triclopyr 2-butoxyethylester?
This substance has 3 hazard statements:
- H302: Harmful if swallowed.
- H315: Causes skin irritation.
- H410: Very toxic to aquatic life with long lasting effects.
What is the melting point of Triclopyr 2-butoxyethylester?
The melting point is no data available and the boiling point is no data available.