NextSDS Logo
Safety Data Sheet EN

2-Butyne-1,4-diol

CAS 110-65-6
EC 203-788-6

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
2-Butyne-1,4-diol
Product Code
A14539
Chemical Name
2-Butyn -1,4 diol
Synonyms
1,4-Dihydroxy-2-butyne

Regulatory Identifiers

CAS Number
110-65-6 Check regulations →
EC Number
203-788-6 Check regulations →

Identified Uses

SU24 Scientific research and development

Manufacturers & Suppliers

Alfa Aesar
Thermo Fisher Scientific Chemicals, Inc. logo

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc.

manufacturer

30 Bond Street Ward Hill, MA 01835-8099

www.alfa.com

Emergency Contacts

Emergency Contact

(800) 343-0660

8am-7pm EST

Carechem 24

(866) 928-0789

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Acute Tox. Cat. 3 H301
Acute Tox. Cat. 3 H331
STOT RE Cat. 2 H373
Skin Corr. Cat. 1B H314
Acute Tox. Cat. 4 H312
Skin Sens. Cat. 1 H317

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H301 + H331 Toxic if swallowed or if inhaled.
H312 Harmful in contact with skin.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H373 May cause damage to the liver and the blood through prolonged or repeated exposure. Route of exposure: Oral and Inhalative.

Precautionary Statements

P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER/ doctor/
P303 + P361 + P353 If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P405 Store locked up.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type Substances

Substances

Chemical Name CAS Number Concentration Hazardous
2-Butyn -1,4 diol EC: 203-788-6 110-65-6 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm. Seek immediate medical advice.

Skin contact

Immediately wash with water and soap and rinse thoroughly. Seek immediate medical advice.

Symptoms: Causes severe skin burns.

Eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Symptoms: Causes serious eye damage.

Ingestion

Do not induce vomiting; immediately call for medical help.

Immediate Medical Attention

Seek immediate medical advice (after inhalation and skin contact). Immediately call for medical help (after swallowing).

Medical Treatment

No further relevant information available.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

Hands

Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Penetration time of glove material (in minutes) Not determined

Eyes

Tightly sealed goggles. Full face protection

Respiratory

Use self-contained respiratory protective device in emergency situations.

Skin/Body

Protective work clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
---
Physical State Data
solid
State Under Standard Conditions
---
Appearance
---
Colour
White
Colour Intensity
---
Form
Flakes
Odor
Not determined
Odor Threshold
Not determined.
Ph
Not applicable.
Melting Point
54-58 C (129-136 F)
Boiling Point
194 C (381 F) (100mm Hg)
Flash Point
152 C (306 F)
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not applicable.
Vapor Pressure
20 hPa (15 mm Hg) at 145 C (293 F)
Vapor Density
Not applicable.
Relative Density
Not determined.
Bulk Density
---
Density
Not determined
Flammability
Not determined.
Upper Explosive Limit
Not determined
Lower Explosive Limit
Not determined
Explosive Limits
---
Auto Ignition Temperature
Not determined.
Decomposition Temperature
Not determined
Solubility
---
Partition Coefficient
Not determined.
Solubility In Water
Not determined
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
Not applicable.
Kinematic Viscosity
Not applicable.
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN2716
Shipping Name
1,4-Butynediol
Transport Class
6.1 Toxic substances.
Packing Group
III
IMDG

Warning: Toxic substances

IATA

Warning: Toxic substances

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is 2-Butyne-1,4-diol known by?

2-Butyne-1,4-diol is also known as: 1,4-Dihydroxy-2-butyne

What is the hazard signal word for 2-Butyne-1,4-diol?

The signal word is danger.

What is 2-Butyne-1,4-diol used for?

SU24 Scientific research and development

What are the hazard statements for 2-Butyne-1,4-diol?

This substance has 5 hazard statements:

  • H301 + H331: Toxic if swallowed or if inhaled.
  • H312: Harmful in contact with skin.
  • H314: Causes severe skin burns and eye damage.
  • H317: May cause an allergic skin reaction.
  • H373: May cause damage to the liver and the blood through prolonged or repeated exposure. Route of exposure: Oral and Inhalative.

What is the melting point of 2-Butyne-1,4-diol?

The melting point is 54-58 C (129-136 F) and the boiling point is 194 C (381 F) (100mm Hg).

Compliance Scanner

Scan your compliance