NextSDS Logo
Safety Data Sheet EN

Diisopropylbenzene (mixture of isomers)

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Diisopropylbenzene (mixture of isomers)
Product Code
D0929

Regulatory Identifiers

CAS Number
N/A

Identified Uses

For laboratory research purposes.

Uses advised against

Not for drug or household use.

Manufacturers & Suppliers

TCI America logo

TCI America

manufacturer

9211 N. Harborgate Street, Portland, OR 97203 U.S.A.

+1-800-423-8616 / +1-503-283-1681

http://www.TCIchemicals.com

Emergency Contacts

TCI America

+1-503-286-7624

8:00am - 5:00pm PST

Chemtrec

+1-800-424-9300

Chemtrec

+1-703-527-3887

TCI America Environmental Health Safety and Security

+1-503-286-7624

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Irrit. Cat. 2
Eye Irrit. Cat. 2B
STOT RE Cat. 2
Flam. Liq. Cat. 4
Aquatic Acute Cat. 1
Aquatic Chronic Cat. 1

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

GHS09 - Environmental hazard

GHS09

Hazard Statements

H227 Combustible liquid
H315 Causes skin irritation
H320 Causes eye irritation
H373 May cause damage to organs: Liver Nervous System through prolonged or repeated exposure.
H400 Very toxic to aquatic life
H410 Very toxic to aquatic life with long lasting effects

Precautionary Statements

P210 Keep away from heat, sparks, open flames or other hot surfaces. - No smoking.
P235 Keep cool.
P261 Do not breathe fume, mist, vapors or spray.
P264 Wash hands and face thoroughly after handling.
P280 Wear protective gloves.
P280 Wear protective gloves, eye protection and face protection.
P305 + P351 + P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P314 Get medical advice or attention if you feel unwell.
P333 + P313 If skin irritation or rash occurs: Get medical advice/attention.
P337 + P313 If eye irritation persists: Get medical advice or attention.
P352 If on skin: Wash with plenty of water.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P370 + P378 In case of fire: Use dry chemical, CO2, water spray or alcohol-resistant foam to extinguish.
P403 Store in well-ventilated place.
P501 Dispose of contents and container in accordance with US EPA guidelines for the classification and determination of hazardous waste listed in 40 CFR 261.3. (See Section 13)

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
Diisopropylbenzene (mixture of isomers) 25321-09-9 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Call emergency medical service. Move victim to fresh air. Give artificial respiration if victim is not breathing. Administer oxygen if breathing is difficult. Keep victim warm and quiet.

Symptoms: Inhalation of vapors or contact with substance will result in contamination and potential harmful effects.

Skin contact

Remove and wash contaminated clothing before re-use. In case of contact with substance, immediately flush skin with running water for at least 20 minutes.

Eye contact

IMMEDIATELY flush eyes with running water for at least 15 minutes, keeping eyelids open. Check for and remove any contact lenses. Move victim to fresh air. Keep victim warm and quiet.

Symptoms: Contact with material may irritate or burn eyes.

Ingestion

Do not induce vomiting without medical advice. If swallowed, seek medical advice immediately and show the container or label. Do not use mouth-to-mouth method if victim ingested the substance; give artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Loosen tight clothing such as a collar, tie, belt or waistband. If a person vomits place them in the recovery position so that vomit will not reenter the mouth and throat. Rinse mouth. Keep victim warm and quiet.

Immediate Medical Attention

If breathing has stopped, perform artificial respiration. Use first aid treatment according to the nature of the injury.

Medical Treatment

Treat symptomatically and supportively.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Dry chemical, CO_{2}, water spray, or alcohol-resistant foam. Consult with local fire authorities before attempting large scale fire fighting operations.

Unsuitable media

Do not use straight streams.

Specific hazards

Closed containers may explode from heat of a fire.

Instructions

Use water spray or fog; do not use straight streams. Dike fire-control water for later disposal; do not scatter the material. CAUTION: All these products have a very low flash point: Use of water spray when fighting fire may be inefficient. Do not use straight streams. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Move containers from fire area if you can do it without risk.

Firefighter Protection

Wear positive pressure self-contained breathing apparatus (SCBA). Structural fire fighters' protective clothing provides limited protection in fire situations ONLY; it may not be effective in spill situations. Wear chemical protective clothing which is specifically recommended by the manufacturer. It may provide little or no thermal protection.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Isolate area until gas has dispersed. Do not clean-up or dispose except under supervision of a specialist. In case of a spill and/or a leak, always shut off any sources of ignition, ventilate the area, and exercise caution. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Warn personnel to move away. Prevent entry into sewers, basements or confined areas; dike if needed.

Environmental

Keep away from living quarters. Environmental hazard. Do not let product enter drains. Prevent further leakage or spillage if safe to do so. Water runoff can cause environmental damage. Prevent entry into sewers, basements or confined areas; dike if needed.

Cleanup methods

Absorb with an inert material and put the spilled material in an appropriate waste disposal container. Use clean non-sparking tools to collect absorbed material.

Materials: Inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Do NOT breath gas, fumes, vapor, or spray. Avoid contact with skin and eyes. Keep away from heat and sources of ignition. Use explosion-proof equipment. Use only non-sparking hand tool when handling this product. Ground all equipment containing material. Take measures to prevent build up of electrostatic charge. Keep container dry. Handle and open container with care. Wear suitable protective clothing, gloves and eye/face protection. When using do not eat, drink, or smoke.

Storage

Keep only in the original container in a cool well-ventilated place. Keep away from sources of ignition. Store and use away from heat, sparks, open flame, or any other ignition source. Keep away from incompatibles. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Avoid prolonged storage periods.

Hygiene

When using do not eat, drink, or smoke.

Fire prevention

Keep away from heat and sources of ignition. Use explosion-proof equipment. Use only non-sparking hand tool when handling this product. Ground all equipment containing material. Take measures to prevent build up of electrostatic charge.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Good general ventilation should be sufficient to control airborne levels. Ventilation is normally required when handling or using this product.

Hands

Wear protective gloves.

Eyes

Splash goggles.

Respiratory

Vapor respirator. Be sure to use a MSHA/NIOSH approved respirator or equivalent.

Skin/Body

Lab coat.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Solubility In Fat
---
Bulk Density
---
Flash Point
77°C (171°F)
Decomposition Temperature
No data available
Lower Explosive Limit
No data available
Relative Density
0.86
Odor Threshold
No data available
Vapor Density
No data available
Partition Coefficient
5.2 (n-octanol/water (log Pow))
Solubility
---
Properties Status
---
Flammability
No data available
Upper Explosive Limit
No data available
Softening Point
---
Crystallisation Point
---
Auto Ignition Temperature
449°C (840°F)
Density
---
Metal Corrosion
---
Voc Content
---
Relative Evaporation Rate
---
Vapor Pressure
No data available
Solubility In Water
---
State Under Standard Conditions
---
Melting Point
No data available
Solidification Point
---
Physical State
Liquid
Evaporation Rate
No data available
Ph
No data available
Dynamic Viscosity
No data available
Form
Clear
Boiling Point
No data available
Appearance
Clear
Freezing Point
---
Cloud Point
---
Colour Intensity
---
Physical State Data
liquid
Explosive Limits
---
Odor
No data available
Molecular Weight
---
Kinematic Viscosity
No data available
Colour
Colorless - Almost colorless
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions. (See Section 7)

Reactivity

Not Available.

Hazardous reactions

In use, may form flammable/explosive vapor-air mixture.

Avoid

Avoid excessive heat and light.

Incompatible

Oxidizing agents

Decomposition

No data available

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Recycle to process if possible. Dissolve or mix material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber system.

Disposal

Recycle to process if possible. It is the generator's responsibility to comply with Federal, State and Local rules and regulations. You may be able to dissolve or mix material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber system.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN3082
Shipping Name
Environmentally hazardous substance, liquid, 9 Miscellaneous hazardous material
Transport Class
9
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Diisopropylbenzene (mixture of isomers)?

The signal word is warning.

What is the physical form of Diisopropylbenzene (mixture of isomers)?

Diisopropylbenzene (mixture of isomers) is a liquid appearing as clear with colorless - almost colorless color. It has no data available odor.

What is Diisopropylbenzene (mixture of isomers) used for?

For laboratory research purposes.

What are the hazard statements for Diisopropylbenzene (mixture of isomers)?

This substance has 6 hazard statements:

  • H227: Combustible liquid
  • H315: Causes skin irritation
  • H320: Causes eye irritation
  • H373: May cause damage to organs: Liver Nervous System through prolonged or repeated exposure.
  • H400: Very toxic to aquatic life
  • H410: Very toxic to aquatic life with long lasting effects

What is the melting point of Diisopropylbenzene (mixture of isomers)?

The melting point is No data available and the boiling point is No data available.