NextSDS Logo
Safety Data Sheet EN

2,2'-Bipyridine

CAS 366-18-7
EC 206-674-4

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
2,2'-Bipyridine
Product Code
36655

Regulatory Identifiers

CAS Number
366-18-7 Check regulations →
EC Number
206-674-4 Check regulations →

Identified Uses

SU24 Scientific research and development

Manufacturers & Suppliers

Alfa Aesar, Thermo Fisher Scientific Chemicals, Inc. logo

Alfa Aesar, Thermo Fisher Scientific Chemicals, Inc.

manufacturer

30 Bond Street, Ward Hill, MA 01835-8099

800-343-0660

http://www.alfa.com

Emergency Contacts

Emergency Contact

(800) 343-0660

Monday-Friday, 8am-7pm EST

Carechem 24

(866) 928-0789

After normal business hours

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Acute Tox. Cat. 3 H301
Acute Tox. Cat. 4 H312

GHS Pictograms

GHS06 - Acute toxicity

GHS06

GHS07 - Health hazard

GHS07

Hazard Statements

H301 Toxic if swallowed.
H312 Harmful in contact with skin.

Precautionary Statements

P280 Wear protective gloves / protective clothing.
P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER/ doctor.
P312 Call a POISON CENTER/doctor if you feel unwell.
P321 Specific treatment (see on this label).
P405 Store locked up.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

Chemical characterization: Substances

Chemical Name CAS Number Concentration Hazardous
2,2'-Bipyridine EC: 206-674-4 366-18-7 100% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm. Seek immediate medical advice.

Symptoms: Irregular breathing or respiratory arrest.

Skin contact

Immediately wash with water and soap and rinse thoroughly. Seek immediate medical advice.

Symptoms: Harmful in contact with skin.

Eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Ingestion

Do not induce vomiting; immediately call for medical help.

Symptoms: Toxic if swallowed.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

Hands

Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Material of gloves Nitrile rubber, NBR. Penetration time of glove material (in minutes) Not determined.

Eyes

Safety glasses with side shields / NIOSH (US) or EN 166(EU).

Respiratory

Use suitable respirator when high concentrations are present. Recommended filter device for short term use: Use a respirator with type P100 (USA) or P3 (EN 143) cartridges as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. 'Only use equipment tested and approved under appropriate government standards.

Skin/Body

Protective work clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Lower Explosive Limit
Not determined
Cloud Point
---
Physical State Data
solid
Solidification Point
---
Vapor Density
Not applicable.
Properties Status
---
Evaporation Rate
Not applicable.
Decomposition Temperature
Not determined
Ph
Not applicable.
Appearance
---
Flammability
Not determined.
Colour
---
Solubility
---
Kinematic Viscosity
Not applicable.
Dynamic Viscosity
Not applicable.
Solubility In Fat
---
Crystallisation Point
---
Flash Point
121 °C (250 °F)
Density
Not determined
Voc Content
---
Melting Point
70 °C (158 °F)
Form
Crystalline
Colour Intensity
---
Physical State
---
Solubility In Water
Not determined
Boiling Point
272-273 °C (522-523 °F)
Molecular Weight
---
Partition Coefficient
Not determined.
Upper Explosive Limit
Not determined
Relative Density
Not determined.
State Under Standard Conditions
---
Metal Corrosion
---
Vapor Pressure
Not applicable.
Relative Evaporation Rate
---
Freezing Point
---
Odor
Not determined
Explosive Limits
---
Softening Point
---
Odor Threshold
Not determined.
Auto Ignition Temperature
Not determined.
Bulk Density
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN2811
Shipping Name
Toxic solids, organic, n.o.s. (2,2'-Bipyridine)
Transport Class
6.1
Packing Group
III
ADR

Warning: Toxic substances

IMDG

Warning: Toxic substances

IATA

Warning: Toxic substances

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for 2,2'-Bipyridine?

The signal word is danger.

What is 2,2'-Bipyridine used for?

SU24 Scientific research and development

What are the hazard statements for 2,2'-Bipyridine?

This substance has 2 hazard statements:

  • H301: Toxic if swallowed.
  • H312: Harmful in contact with skin.

What is the melting point of 2,2'-Bipyridine?

The melting point is 70 °C (158 °F) and the boiling point is 272-273 °C (522-523 °F).