NextSDS Logo
Safety Data Sheet EN

Chromium(II) chloride, anhydrous

CAS 10049-05-5
EC 233-163-3

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Chromium(II) chloride, anhydrous
Product Code
12335
Chemical Name
Chromium(II) chloride, anhydrous

Regulatory Identifiers

CAS Number
10049-05-5 Check regulations →
EC Number
233-163-3 Check regulations →

Identified Uses

SU24 Scientific research and development

Manufacturers & Suppliers

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc. logo

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc.

manufacturer

30 Bond Street Ward Hill, MA 01835-8099

www.alfa.com

Emergency Contacts

Alfa Aesar / Thermo Fisher Scientific Chemicals, Inc.

(800) 343-0660

Monday-Friday, 8am-7pm EST

Carechem 24

(866) 928-0789

After normal business hours

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Corr. Cat. 1B H314
Eye Dam. Cat. 1 H318
Acute Tox. Cat. 4 H302

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS05 - Corrosive

GHS05

Hazard Statements

H302 Harmful if swallowed.
H314 Causes severe skin burns and eye damage.
H318 Causes serious eye damage.

Precautionary Statements

P260 Do not breathe dusts or mists.
P301+P330+P331 If swallowed: Rinse mouth. Do NOT induce vomiting.
P303+P361+P353 If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P405 Store locked up.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

Substances

Chemical Name CAS Number Concentration Hazardous
N/A --- --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm. Seek immediate medical advice.

Skin contact

Immediately wash with water and soap and rinse thoroughly. Seek immediate medical advice.

Eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Ingestion

Seek medical treatment.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

Hands

Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Material of gloves Nitrile rubber, NBR. Penetration time of glove material (in minutes) 480. Glove thickness: 0.11 mm

Eyes

Tightly sealed goggles. Full face protection. Safety glasses with side shields / NIOSH (US) or EN 166(EU)

Respiratory

Use suitable respirator when high concentrations are present. Recommended filter device for short term use: Use a respirator with type N95 (USA) or PE (EN 143) cartridges as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. Only use equipment tested and approved under appropriate government standards.

Skin/Body

Protective work clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Freezing Point
---
Boiling Point
Not determined
Dynamic Viscosity
Not applicable.
Solubility In Water
Not determined
Colour Intensity
---
Molecular Weight
---
Appearance
---
Flammability
Not determined.
Kinematic Viscosity
Not applicable.
Flash Point
---
Metal Corrosion
---
Solubility
---
Solidification Point
---
Odor
Odorless
Form
Powder
Voc Content
---
Lower Explosive Limit
Not determined
State Under Standard Conditions
---
Melting Point
824 °C (1515 °F)
Evaporation Rate
Not applicable.
Density
2.878 g/cm3 (24.017 lbs/gal)
Crystallisation Point
---
Vapor Pressure
Not applicable.
Upper Explosive Limit
Not determined
Partition Coefficient
Not determined.
Decomposition Temperature
Not determined
Bulk Density
---
Auto Ignition Temperature
Not determined.
Colour
---
Solubility In Fat
---
Odor Threshold
Not determined.
Relative Evaporation Rate
---
Ph
Not applicable.
Physical State Data
solid
Softening Point
---
Cloud Point
---
Vapor Density
Not applicable.
Physical State
---
Relative Density
Not determined.
Explosive Limits
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN3260
Shipping Name
Corrosive solid, acidic, inorganic, n.o.s. (Chromium(II) chloride)
Transport Class
8
Packing Group
III
IMDG

Warning: Corrosive substances

IATA

Warning: Corrosive substances

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Chromium(II) chloride, anhydrous?

The signal word is danger.

What is Chromium(II) chloride, anhydrous used for?

SU24 Scientific research and development

What are the hazard statements for Chromium(II) chloride, anhydrous?

This substance has 3 hazard statements:

  • H302: Harmful if swallowed.
  • H314: Causes severe skin burns and eye damage.
  • H318: Causes serious eye damage.

What is the melting point of Chromium(II) chloride, anhydrous?

The melting point is 824 °C (1515 °F) and the boiling point is Not determined.

Compliance Scanner

Scan your compliance