NextSDS Logo
Safety Data Sheet EN

Cyanamide

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Cyanamide
Product Code
10669
Synonyms
None in common use.

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

J

Johnson Matthey Catalog Company Inc.

manufacturer

30 Bond Street, Ward Hill, Massachusetts, 01835-8099

Emergency Contacts

Johnson Matthey Catalog Company Inc.

(978) 521-6300

CHEMTREC

(800) 424-9300

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified na: r-phrases

Hazard Classifications

VERY TOXIC
SEVERE IRRITANT

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
Cyanamide 420-04-2 --- No

Notes

Minor Impurities: Not determined

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air. If breathing is difficult give oxygen and seek medical attention.

Skin contact

Remove contaminated clothing. Wash affected area with soap and water. Rinse thoroughly. If irritation persists or other symptoms are observed, seek medical advice. Show the physician the container details.

Eye contact

Flush with copious amounts of water for at least 15 minutes. If irritation persists, seek medical attention.

Ingestion

Rinse out mouth and drink lots of water. Seek urgent medical attention and show physician the container details.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use carbon dioxide or dry powder.

Unsuitable media

In general, water-based extinguishers should not be used for fires involving organic materials.

Instructions

Use fire fighting measures which suit the environment and take into account other materials which may be involved.

Firefighter Protection

Wear self-contained breathing apparatus and protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Keep unprotected persons away.

Environmental

Take precautions to ensure product does not contaminate the ground or enter the drainage system.

Cleanup methods

Mix with vermiculite or proprietary absorbent material and transfer to sealed containers for disposal.

Materials: vermiculite or proprietary absorbent material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Chemicals should be used only by those trained in handling potentially hazardous materials. Rubber gloves, eye protection and protective clothing should be worn.

Storage

Store in tightly sealed containers in a refrigerator or cold room at 5 degrees centigrade or below. Product is hygroscopic. Take precautions to avoid contact with atmospheric moisture.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Handle in an efficient fume hood or equivalent system.

Hands

Wear rubber gloves.

Eyes

Wear safety spectacles, goggles or, for larger quantities, a full face mask.

Respiratory

Avoid inhalation of product.

Skin/Body

Wear protective clothing and, for larger quantities, full arm, body and face protection.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Colour Intensity
---
Flash Point
>110°
Melting Point
44-46°
Appearance
Moist white crystals
Flammability
---
Vapor Density
---
Relative Density
---
Dynamic Viscosity
---
Partition Coefficient
---
Form
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
---
Metal Corrosion
---
Physical State
Moist white crystals
Solubility In Fat
---
Ph
---
Decomposition Temperature
---
Colour
---
Bulk Density
---
Kinematic Viscosity
---
Odor
---
Softening Point
---
Vapor Pressure
---
Solidification Point
---
Evaporation Rate
---
Odor Threshold
---
Properties Status
---
Upper Explosive Limit
---
Solubility
V sol
Molecular Weight
42.04
Freezing Point
---
Solubility In Water
V sol
State Under Standard Conditions
---
Density
1.282
Cloud Point
---
Boiling Point
---
Physical State Data
solid
Crystallisation Point
---
Voc Content
---
Relative Evaporation Rate
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Incompatible

Bases. Acids. Strong oxidising agents. Strong reducing agents.

Decomposition

Hazardous products of decomposition may include: carbon monoxide, carbon dioxide, oxides of nitrogen, nitric acid, hydrogen cyanide.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

Disposal should be via an approved contractor and should take full account of local regulations.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
2811
Transport Class
6.1
Packing Group
I
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

VERY TOXIC ~ SEVERE IRRITANT

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is Cyanamide known by?

Cyanamide is also known as: None in common use.

What is the hazard signal word for Cyanamide?

The signal word is na: r-phrases.

What is the physical form of Cyanamide?

Cyanamide is a moist white crystals appearing as moist white crystals .

What is the solubility of Cyanamide?

V sol

What is the melting point of Cyanamide?

The melting point is 44-46° .