NextSDS Logo
Safety Data Sheet EN

Tri-n-butyl phosphate

CAS 126-73-8
EC 204-800-2

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Tri-n-butyl phosphate
Chemical Name
Tri-n-butyl phosphate

Regulatory Identifiers

CAS Number
126-73-8 Check regulations →
EC Number
204-800-2 Check regulations →

Identified Uses

SU24 Scientific research and development

Manufacturers & Suppliers

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc. logo

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc.

manufacturer

30 Bond Street, Ward Hill, MA 01835-8099

800-343-0660

http://www.alfa.com

Emergency Contacts

Emergency Contact

800-343-0660

Monday-Friday, 8am-7pm EST

Carechem 24

866-928-0789

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Carc. Cat. 2 H351
Acute Tox. Cat. 4 H302
Skin Irrit. Cat. 2 H315

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H302 Harmful if swallowed.
H315 Causes skin irritation.
H351 Suspected of causing cancer.

Precautionary Statements

P280 Wear protective gloves / protective clothing.
P301+P310 IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.
P315 Get immediate medical advice/attention.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

Chemical characterization: Substances

Chemical Name CAS Number Concentration Hazardous
Tri-n-butyl phosphate EC: 204-800-2 126-73-8 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm.

Skin contact

Immediately wash with water and soap and rinse thoroughly. Seek immediate medical advice.

Symptoms: Causes skin irritation.

Eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Ingestion

Seek medical treatment.

Symptoms: Harmful if swallowed.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

Hands

Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Penetration time of glove material (in minutes) Not determined.

Eyes

Safety glasses.

Respiratory

Use suitable respirator when high concentrations are present. Recommended filter device for short term use: Use a respirator with multi-purpose combination (US) or type ABEK (EN 14387) as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. Only use equipment tested and approved under appropriate government standards such as NIOSH (USA) or CEN (EU).

Skin/Body

Protective work clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Liquid
Colour
---
Colour Intensity
---
Form
Liquid
Odor
Odorless
Odor Threshold
Not determined.
Ph
Not determined.
Melting Point
-80 ℃ (-112 °F)
Boiling Point
155-156 °℃ (311-313 ºF) (10mm)
Flash Point
152 °C (306 °F)
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not determined.
Vapor Pressure
0.008 hPa
Vapor Density
Not determined.
Relative Density
Not determined.
Bulk Density
---
Density
0.977 g/cm3 (8.153 lbs/gal)
Flammability
Not determined.
Upper Explosive Limit
Not determined.
Lower Explosive Limit
Not determined.
Explosive Limits
---
Auto Ignition Temperature
>400 °℃ (>752 °F)
Decomposition Temperature
Not determined
Solubility
6 g/l
Partition Coefficient
Not determined.
Solubility In Water
6 g/l
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
3.5-4.0 mPas
Kinematic Viscosity
Not determined.
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

Shipping Name
Not applicable
Transport Class
Not applicable
Packing Group
Not applicable
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Tri-n-butyl phosphate?

The signal word is warning.

What is the physical form of Tri-n-butyl phosphate?

Tri-n-butyl phosphate is a liquid appearing as liquid . It has odorless odor.

What is the solubility of Tri-n-butyl phosphate?

6 g/l

What is Tri-n-butyl phosphate used for?

SU24 Scientific research and development

What are the hazard statements for Tri-n-butyl phosphate?

This substance has 3 hazard statements:

  • H302: Harmful if swallowed.
  • H315: Causes skin irritation.
  • H351: Suspected of causing cancer.

What is the melting point of Tri-n-butyl phosphate?

The melting point is -80 ℃ (-112 °F) and the boiling point is 155-156 °℃ (311-313 ºF) (10mm).

Compliance Scanner

Scan your compliance