Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 2-Methylstyrene
- Product Code
- A12676, L08013
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Alfa Aesar, A Johnson Matthey Company
manufacturer
30 Bond Street, Ward Hill, MA 01835-8099
http://www.alfa.com
Emergency Contacts
Alfa Aesar
(978) 521-6300
CHEMTREC
(800) 424-9300
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2-Methylstyrene EC: 210-256-7 | 611-15-4 | 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air. If required, provide artificial respiration. Keep patient warm.
Immediately wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water.
Immediate Medical Attention
Seek immediate medical advice.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
In case of fire, the following can be released: Carbon monoxide and carbon dioxide
Firefighter Protection
Wear self-contained respirator. Wear fully protective impervious suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away. Ensure adequate ventilation. Keep away from ignition sources.
Do not allow material to be released to the environment without proper governmental permits.
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep container tightly sealed. Ensure good ventilation at the workplace.
Refrigerate. Keep container tightly sealed. Protect from heat.
Keep ignition sources away. Protect against electrostatic charges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.
Check protective gloves prior to each use for their proper condition. Impervious gloves. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer.
Safety glasses
Use suitable respirator when high concentrations are present.
Protective work clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable until: Depletion of inhibitor.
Danger of polymerization. Spontaneous polymerization can be caused in unstabilized product e.g. by ambient heat. Unless inhibited, the product can polymerize resulting in a temperature and pressure increase that may rupture the container.
Heat, Ultraviolet radiation, Free radical initiators, heating
Heat, Ultraviolet radiation, Free radical initiators
Carbon monoxide and carbon dioxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Consult state, local or national regulations to ensure proper disposal.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3295
- Shipping Name
- HYDROCARBONS, LIQUID, N.O.S. (2-Methylstyrene)
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Hazard symbols: Xn Harmful, N Dangerous for the environment. Risk phrases: 20 Harmful by inhalation, 51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Safety phrases: 24 Avoid contact with skin, 61 Avoid release to the environment.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 2-Methylstyrene?
The signal word is warning.
What is the physical form of 2-Methylstyrene?
2-Methylstyrene is a liquid with colorless color. It has pungent odor.
What are the hazard statements for 2-Methylstyrene?
This substance has 3 hazard statements:
- H226: Flammable liquid and vapour.
- H332: Harmful if inhaled.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of 2-Methylstyrene?
The melting point is -69°C (-92°F) and the boiling point is 170-172°C (338-342°F).