NextSDS Logo
Safety Data Sheet EN

Potassium acetate

CAS 127-08-2
EC 204-822-2

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Potassium acetate
Product Code
13449

Regulatory Identifiers

CAS Number
127-08-2 Check regulations →
EC Number
204-822-2 Check regulations →

Identified Uses

SU24 Scientific research and development

Manufacturers & Suppliers

Alfa Aesar / Thermo Fisher Scientific Chemicals, Inc. logo

Alfa Aesar / Thermo Fisher Scientific Chemicals, Inc.

manufacturer

30 Bond Street, Ward Hill, MA 01835-8099

http://www.alfa.com

Emergency Contacts

Alfa Aesar / Thermo Fisher Scientific Chemicals, Inc.

(800) 343-0660

During normal business hours (Monday-Friday, 8am-7pm EST)

Carechem 24

(866) 928-0789

After normal business hours

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

Substances

Chemical Name CAS Number Concentration Hazardous
Potassium acetate 127-08-2 100% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm.

Skin contact

Immediately wash with water and soap and rinse thoroughly.

Eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Ingestion

Seek medical treatment.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

Hands

Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Material of gloves Nitrile rubber, NBR. Penetration time of glove material (in minutes) 480. Glove thickness: 0.11 mm.

Eyes

Safety glasses with side shields / NIOSH (US) or EN 166(EU).

Respiratory

Respirator when high concentrations are present. Use suitable respiratory protective device in case of insufficient ventilation. Recommended filter device for short term use: Use a respirator with type N95 (USA) or P2 (EN 143) cartridges as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. Only use equipment tested and approved under appropriate government standards.

Skin/Body

Protective work clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Bulk Density
---
Colour Intensity
---
Solubility In Water
Not determined
Ph
Not applicable.
Form
---
Kinematic Viscosity
Not applicable.
Upper Explosive Limit
Not determined
Boiling Point
Not determined
Odor
Not determined
Freezing Point
---
Dynamic Viscosity
Not applicable.
Softening Point
---
Colour
---
Flash Point
---
Metal Corrosion
---
Physical State Data
---
Auto Ignition Temperature
Not determined
Vapor Density
Not applicable.
Physical State
---
Cloud Point
---
Relative Density
Not determined.
Properties Status
---
Odor Threshold
Not determined.
Partition Coefficient
Not determined.
Appearance
Crystalline powder
Voc Content
---
Solubility
---
Explosive Limits
---
Crystallisation Point
---
Solidification Point
---
State Under Standard Conditions
---
Melting Point
292 °C (558 °F)
Relative Evaporation Rate
---
Vapor Pressure
Not applicable.
Lower Explosive Limit
Not determined
Flammability
Not determined.
Decomposition Temperature
Not determined
Solubility In Fat
---
Density
1.57 g/cm3 (13.102 lbs/gal)
Evaporation Rate
Not applicable.
Molecular Weight
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

Shipping Name
Not applicable
Transport Class
Not applicable
Packing Group
Not applicable
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Potassium acetate?

The signal word is no signal word.

What is Potassium acetate used for?

SU24 Scientific research and development

What is the melting point of Potassium acetate?

The melting point is 292 °C (558 °F) and the boiling point is Not determined.