NextSDS Logo
Safety Data Sheet EN

Bromoethane

CAS 74-96-4
EC 200-825-8

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Bromoethane
Chemical Name
Ethyl bromide
Synonyms
Ethyl bromide

Regulatory Identifiers

CAS Number
74-96-4 Check regulations →
EC Number
200-825-8 Check regulations →

Identified Uses

SU24 Scientific research and development

Manufacturers & Suppliers

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc. logo

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc.

manufacturer

30 Bond Street, Ward Hill, MA 01835-8099

800-343-0660

http://www.alfa.com

Emergency Contacts

Emergency Contact

800-343-0660

During normal business hours (Monday-Friday, 8am-7pm EST)

Carechem 24

866-928-0789

After normal business hours

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 2 H225
Carc. Cat. 2 H351
Acute Tox. Cat. 4 H302
Acute Tox. Cat. 4 H332

GHS Pictograms

GHS02 - Flammable

GHS02

GHS08 - Serious health hazard

GHS08

Hazard Statements

H225 Highly flammable liquid and vapor.
H302 + H332 Harmful if swallowed or if inhaled.
H351 Suspected of causing cancer.

Precautionary Statements

P201 Obtain special instructions before use.
P210 Keep away from heat/sparks/open flames/hot surfaces. No smoking.
P261 Avoid breathing dust/fume/gas/mist/vapors/spray
P303 + P361 + P353 If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P405 Store locked up.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

Substances

Chemical Name CAS Number Concentration Hazardous
Ethyl bromide EC: 200-825-8 74-96-4 100% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm.

Symptoms: Harmful if inhaled.

Skin contact

Immediately wash with water and soap and rinse thoroughly.

Eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Ingestion

Seek medical treatment.

Symptoms: Harmful if swallowed.

Immediate Medical Attention

No further relevant information available.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

Hands

Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Material of gloves Fluorocarbon rubber (Viton)

Eyes

Safety glasses with side shields / NIOSH (US) or EN 166(EU)

Respiratory

Use suitable respirator when high concentrations are present. Recommended filter device for short term use: Use a respirator with multi-purpose combination (US) or type AXBEK (EN 14387) as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. Only use equipment tested and approved under appropriate government standards such as NIOSH (USA) or CEN (EU).

Skin/Body

Protective work clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

State Under Standard Conditions
---
Kinematic Viscosity
Not determined.
Decomposition Temperature
Not determined.
Odor
Ether-like
Partition Coefficient
Not determined.
Physical State Data
liquid
Ph
Not determined.
Crystallisation Point
---
Vapor Density
Not determined.
Solubility In Water
9 g/l
Density
1.46 g/cm3 (12.184 lbs/gal)
Odor Threshold
Not determined.
Cloud Point
---
Lower Explosive Limit
6.7 Vol %
Relative Evaporation Rate
---
Explosive Limits
---
Colour
---
Evaporation Rate
Not determined.
Voc Content
---
Auto Ignition Temperature
510 °℃ (950 °F)
Flash Point
-23 °℃ (-9 ºF)
Form
Liquid
Physical State
Liquid
Boiling Point
37-39 ℃ (99-102 °F)
Freezing Point
---
Vapor Pressure
507 hPa (380 mm Hg)
Bulk Density
---
Solubility In Fat
---
Molecular Weight
---
Solubility
Not specified
Solidification Point
---
Dynamic Viscosity
Not determined.
Properties Status
---
Appearance
Not specified
Upper Explosive Limit
11.3 Vol %
Colour Intensity
---
Metal Corrosion
---
Softening Point
---
Flammability
Not determined.
Melting Point
-119 °℃ (-182 °F)
Relative Density
Not determined.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN1891
Shipping Name
Ethyl bromide
Transport Class
6.1
Packing Group
II
ADR

Warning: Toxic substances F-A,S-Ă

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is Bromoethane known by?

Bromoethane is also known as: Ethyl bromide

What is the hazard signal word for Bromoethane?

The signal word is danger.

What is the physical form of Bromoethane?

Bromoethane is a liquid appearing as not specified . It has ether-like odor.

What is the solubility of Bromoethane?

Not specified

What is Bromoethane used for?

SU24 Scientific research and development

What are the hazard statements for Bromoethane?

This substance has 3 hazard statements:

  • H225: Highly flammable liquid and vapor.
  • H302 + H332: Harmful if swallowed or if inhaled.
  • H351: Suspected of causing cancer.

What is the melting point of Bromoethane?

The melting point is -119 °℃ (-182 °F) and the boiling point is 37-39 ℃ (99-102 °F).

Compliance Scanner

Scan your compliance