NextSDS Logo
Safety Data Sheet EN

Perchloric acid, 70%

CAS 7601-90-3
EC 231-512-4

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Perchloric acid, 70%
Product Code
10983
Chemical Name
Perchloric acid

Regulatory Identifiers

CAS Number
7601-90-3 Check regulations →
EC Number
231-512-4 Check regulations →

Identified Uses

SU24 Scientific research and development

Manufacturers & Suppliers

Alfa Aesar logo

Alfa Aesar

manufacturer

30 Bond Street, Ward Hill, MA 01835-8099

http://www.alfa.com

T

Thermo Fisher Scientific Chemicals, Inc.

manufacturer

30 Bond Street, Ward Hill, MA 01835-8099

Emergency Contacts

Alfa Aesar

(800) 343-0660

Monday-Friday, 8am-7pm EST

Carechem 24

(866) 928-0789

After normal business hours

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Ox. Liq. Cat. 1 H271
Skin Corr. Cat. 1A H314

GHS Pictograms

GHS03 - Oxidizing

GHS03

GHS05 - Corrosive

GHS05

Hazard Statements

H271 May cause fire or explosion; strong oxidizer.
H314 Causes severe skin burns and eye damage.

Precautionary Statements

P221 Take any precaution to avoid mixing with combustibles.
P283 Wear fire/flame resistant/retardant clothing.
P303+P361+P353 If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P405 Store locked up.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

Substances

Chemical Name CAS Number Concentration Hazardous
Perchloric acid EC: 231-512-4 7601-90-3 --- Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm. Seek immediate medical advice.

Skin contact

Immediately wash with water and soap and rinse thoroughly. Seek immediate medical advice.

Eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Ingestion

Seek medical treatment.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

Hands

Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Material of gloves Butyl rubber, BR. Penetration time of glove material (in minutes) >480. Glove thickness: 0.3 mm

Eyes

Tightly sealed goggles. Full face protection. Safety glasses with side shields / NIOSH (US) or EN 166(EU)

Respiratory

Use suitable respirator when high concentrations are present. Recommended filter device for short term use: Use a respirator with multi-purpose combination (US) or type ABEK (EN 14387) as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. Only use equipment tested and approved under appropriate government standards such as NIOSH (USA) or CEN (EU).

Skin/Body

Protective work clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Vapor Pressure
Not determined
Voc Content
---
Density
1.67 g/cm3 (13.936 lbs/gal)
Bulk Density
---
Solidification Point
---
Partition Coefficient
Not determined.
Appearance
Liquid
Colour
---
Explosive Limits
---
Dynamic Viscosity
Not determined.
Lower Explosive Limit
Not determined
Physical State
Liquid
Vapor Density
Not determined.
Flash Point
113 ℃ (235 °F)
Solubility
---
Auto Ignition Temperature
Not determined.
State Under Standard Conditions
---
Metal Corrosion
---
Flammability
Not determined.
Colour Intensity
---
Physical State Data
liquid
Melting Point
-18 °℃ (-0 ºF)
Solubility In Water
Fully miscible
Evaporation Rate
Not determined.
Cloud Point
---
Decomposition Temperature
Not determined
Properties Status
---
Kinematic Viscosity
Not determined.
Softening Point
---
Boiling Point
203 ℃ (397 'ºF)
Relative Evaporation Rate
---
Relative Density
Not determined.
Freezing Point
---
Form
Liquid
Odor
Odorless
Odor Threshold
Not determined.
Crystallisation Point
---
Ph
Not determined.
Upper Explosive Limit
Not determined
Solubility In Fat
---
Molecular Weight
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN1873
Shipping Name
Perchloric acid
Transport Class
5.1 Oxidizing substances
Packing Group
I
ADR

Warning: Oxidizing substances

IMDG

Warning: Oxidizing substances

IATA

Warning: Oxidizing substances

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Perchloric acid, 70%?

The signal word is danger.

What is the physical form of Perchloric acid, 70%?

Perchloric acid, 70% is a liquid appearing as liquid . It has odorless odor.

What is Perchloric acid, 70% used for?

SU24 Scientific research and development

What are the hazard statements for Perchloric acid, 70%?

This substance has 2 hazard statements:

  • H271: May cause fire or explosion; strong oxidizer.
  • H314: Causes severe skin burns and eye damage.

What is the melting point of Perchloric acid, 70%?

The melting point is -18 °℃ (-0 ºF) and the boiling point is 203 ℃ (397 'ºF).