NextSDS Logo
Safety Data Sheet EN

2,2-Dichloro-1,1-difluoroethyl methyl ether

CAS 76-38-0
EC 200-956-0

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
2,2-Dichloro-1,1-difluoroethyl methyl ether
Product Code
L17285
Chemical Name
2,2-Dichloro-1,1-difluoroethyl methyl ether

Regulatory Identifiers

CAS Number
76-38-0 Check regulations →
EC Number
200-956-0 Check regulations →

Identified Uses

SU24 Scientific research and development

Manufacturers & Suppliers

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc. logo

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc.

manufacturer

30 Bond Street, Ward Hill, MA 01835-8099

800-343-0660

http://www.alfa.com

Emergency Contacts

Emergency Contact

(800) 343-0660

Monday-Friday, 8am-7pm EST

Carechem 24

(866) 928-0789

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Flam. Liq. Cat. 3 H226
Eye Irrit. Cat. 2A H319
Muta. Cat. 2 H341

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H226 Flammable liquid and vapor.
H319 Causes serious eye irritation.
H341 Suspected of causing genetic defects.

Precautionary Statements

P201 Obtain special instructions before use.
P210 Keep away from heat/sparks/open flames/hot surfaces. No smoking.
P303+P361+P353 If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P405 Store locked up.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

Chemical characterization: Substances

Chemical Name CAS Number Concentration Hazardous
2,2-Dichloro-1,1-difluoroethyl methyl ether EC: 200-956-0 76-38-0 100% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm.

Skin contact

Immediately wash with water and soap and rinse thoroughly.

Eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Symptoms: Causes serious eye irritation.

Ingestion

Seek medical treatment.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

Hands

Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer.

Eyes

Safety glasses with side shields / NIOSH (US) or EN 166(EU).

Respiratory

Use suitable respirator when high concentrations are present. Recommended filter device for short term use: Use a respirator with multi-purpose combination (US) or type ABEK (EN 14387) as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. Only use equipment tested and approved under appropriate government standards such as NIOSH (USA) or CEN (EU).

Skin/Body

Protective work clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Boiling Point
105 ℃ (221 °F)
Relative Evaporation Rate
---
Properties Status
---
Voc Content
---
Density
1.44 g/cm3 (12.017 lbs/gal)
Explosive Limits
---
Colour Intensity
---
Upper Explosive Limit
Not determined
Vapor Pressure
Not determined
Solubility
Not miscible or difficult to mix
Bulk Density
---
Flash Point
37 °℃ (99 °F)
Flammability
Not determined.
Metal Corrosion
---
Physical State
Liquid
Solidification Point
---
Partition Coefficient
Not determined.
Auto Ignition Temperature
Not determined.
Melting Point
-36 °℃ (-33 ºF)
Cloud Point
---
Freezing Point
---
Odor
Not determined
Softening Point
---
Evaporation Rate
Not determined.
Appearance
Not determined
Odor Threshold
Not determined.
Solubility In Fat
---
Colour
---
Relative Density
Not determined.
Kinematic Viscosity
Not determined.
Physical State Data
liquid
Ph
Not determined.
Crystallisation Point
---
Lower Explosive Limit
Not determined
Molecular Weight
---
Dynamic Viscosity
Not determined.
State Under Standard Conditions
---
Vapor Density
Not determined.
Solubility In Water
Not miscible or difficult to mix
Decomposition Temperature
Not determined
Form
Liquid
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN3271
Shipping Name
Ethers, n.o.s. (2,2-Dichloro-1,1-difluoroethyl methyl ether)
Transport Class
8
Packing Group
III
ADR

Warning: Flammable liquids F-E,S-Ď A

IMDG

Warning: Flammable liquids F-E,S-Ď A

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for 2,2-Dichloro-1,1-difluoroethyl methyl ether?

The signal word is warning.

What is the physical form of 2,2-Dichloro-1,1-difluoroethyl methyl ether?

2,2-Dichloro-1,1-difluoroethyl methyl ether is a liquid appearing as not determined . It has not determined odor.

What is the solubility of 2,2-Dichloro-1,1-difluoroethyl methyl ether?

Not miscible or difficult to mix

What is 2,2-Dichloro-1,1-difluoroethyl methyl ether used for?

SU24 Scientific research and development

What are the hazard statements for 2,2-Dichloro-1,1-difluoroethyl methyl ether?

This substance has 3 hazard statements:

  • H226: Flammable liquid and vapor.
  • H319: Causes serious eye irritation.
  • H341: Suspected of causing genetic defects.

What is the melting point of 2,2-Dichloro-1,1-difluoroethyl methyl ether?

The melting point is -36 °℃ (-33 ºF) and the boiling point is 105 ℃ (221 °F).

Compliance Scanner

Scan your compliance