NextSDS Logo
Safety Data Sheet EN

2-Bromo-2-nitropropane-1,3-diol

CAS 52-51-7
EC 200-143-0

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
2-Bromo-2-nitropropane-1,3-diol
Product Code
A11639, L06465
Chemical Name
2-Bromo-2-nitropropane-1,3-diol

Regulatory Identifiers

CAS Number
52-51-7 Check regulations →
EC Number
200-143-0 Check regulations →

Identified Uses

SU24 Scientific research and development

Manufacturers & Suppliers

Alfa Aesar logo

Alfa Aesar

manufacturer

Thermo Fisher Scientific Chemicals, Inc. 30 Bond Street Ward Hill, MA 01835-8099

800-343-0660

http://www.alfa.com

Emergency Contacts

Emergency Contact

(800) 343-0660

Monday-Friday, 8am-7pm EST

Carechem 24

(866) 928-0789

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Sol. Cat. 2 H228
Acute Tox. Cat. 3 H301
Acute Tox. Cat. 3 H331
Eye Dam. Cat. 1 H318
Acute Tox. Cat. 4 H312
Skin Irrit. Cat. 2 H315
STOT SE Cat. 3 H335

GHS Pictograms

GHS02 - Flammable

GHS02

GHS05 - Corrosive

GHS05

GHS06 - Acute toxicity

GHS06

GHS07 - Health hazard

GHS07

Hazard Statements

H228 Flammable solid.
H301 + H331 Toxic if swallowed or if inhaled.
H312 Harmful in contact with skin.
H315 Causes skin irritation.
H318 Causes serious eye damage.
H335 May cause respiratory irritation.

Precautionary Statements

P210 Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
P240 Ground/bond container and receiving equipment.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P304 + P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER/doctor.
P362 Take off contaminated clothing and wash before reuse.
P405 Store locked up.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

Chemical characterization: Substances

Chemical Name CAS Number Concentration Hazardous
2-Bromo-2-nitropropane-1,3-diol EC: 200-143-0 52-51-7 100% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm. Seek immediate medical advice.

Symptoms: Toxic if inhaled. May cause respiratory irritation.

Skin contact

Immediately wash with water and soap and rinse thoroughly. Seek immediate medical advice.

Symptoms: Causes skin irritation. Harmful in contact with skin.

Eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Symptoms: Causes serious eye damage.

Ingestion

Do not induce vomiting; immediately call for medical help.

Symptoms: Toxic if swallowed.

Immediate Medical Attention

Seek immediate medical advice.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Carbon dioxide, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

Specific hazards

If this product is involved in a fire, the following can be released: Carbon monoxide and carbon dioxide Nitrogen oxides (NOx) Hydrogen bromide (HBr)

Firefighter Protection

Wear self-contained respirator. Wear fully protective impervious suit.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Wear protective equipment. Keep unprotected persons away. Ensure adequate ventilation. Keep away from ignition sources

Environmental

Do not allow product to reach sewage system or any water course.

Cleanup methods

Dispose of contaminated material as waste according to

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Keep container tightly sealed. Store in cool, dry place in tightly closed containers. Ensure good ventilation at the workplace. Open and handle container with care.

Storage

Store in a cool location. Keep container tightly sealed. Store in cool, dry conditions in well sealed containers.

Fire prevention

Protect against electrostatic charges.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Material of gloves: Nitrile rubber, NBR. Penetration time of glove material (in minutes): 480. Glove thickness: 0.11 mm.

Eyes

Tightly sealed goggles

Respiratory

Use self-contained respiratory protective device in emergency situations. Recommended filter device for short term use: Use a respirator with type P100 (USA) or P3 (EN 143) cartridges as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. Only use equipment tested and approved under appropriate government standards.

Skin/Body

Protective work clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Language Code
---
Physical State
solid
Physical State Data
solid
State Under Standard Conditions
---
Appearance
---
Colour
---
Colour Intensity
---
Form
Crystalline
Odor
Not determined
Odor Threshold
Not determined.
Ph
5-7 (10 g/l) at 20 °C (68 °F)
Melting Point
ca 122-132 °C (ca 252-270 °F)
Boiling Point
Not determined
Flash Point
---
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not applicable.
Vapor Pressure
Not applicable.
Vapor Density
Not applicable.
Relative Density
Not determined.
Bulk Density
---
Density
Not determined
Flammability
Highly flammable.
Upper Explosive Limit
Not determined
Lower Explosive Limit
Not determined
Explosive Limits
---
Auto Ignition Temperature
Not determined
Decomposition Temperature
Not determined
Solubility
---
Partition Coefficient
Not determined.
Solubility In Water
280 g/l at 20 °C (68 °F)
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
Not applicable.
Kinematic Viscosity
Not applicable.
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Reactivity

No information known.

Hazardous reactions

Reacts with strong oxidizing agents

Avoid

Decomposition will not occur if used and stored according to specifications.

Incompatible

Oxidizing agents

Decomposition

Carbon monoxide and carbon dioxide, Nitrogen oxides, Hydrogen bromide

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.4 Mobility in soil

Mobility in soil: No further relevant information available.

12.5 Results of PBT and vPvB assessment

PBT: Not applicable. vPvB: Not applicable.

12.6 Endocrine disrupting properties

No information provided.

12.7 Other adverse effects

No further relevant information available.

12.1 Toxicity

Aquatic toxicity: No further relevant information available. Ecotoxical effects: Remark: Very toxic for aquatic organisms. Also poisonous for fish and plankton in water bodies.

The substance is considered very toxic for aquatic organisms and is poisonous for fish and plankton in water bodies.

12.2 Persistence and degradability

Persistence and degradability: No further relevant information available.

12.3 Bioaccumulative potential

Bioaccumulative potential: No further relevant information available.
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Consult state, local or national regulations to ensure proper disposal.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN3241
Shipping Name
2-Bromo-2-nitropropane-1,3-diol
Transport Class
4.1
Packing Group
III
ADR

Warning: Flammable solids, self-reactive substances and solid desensitised explosives

IMDG

Warning: Flammable solids, self-reactive substances and solid desensitised explosives

IATA

Warning: Flammable solids, self-reactive substances and solid desensitised explosives

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The product is classified and labeled in accordance with 29 CFR 1910 (OSHA HCS).

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for 2-Bromo-2-nitropropane-1,3-diol?

The signal word is danger.

What is the physical form of 2-Bromo-2-nitropropane-1,3-diol?

2-Bromo-2-nitropropane-1,3-diol is a solid . It has not determined odor.

What is 2-Bromo-2-nitropropane-1,3-diol used for?

SU24 Scientific research and development

What are the hazard statements for 2-Bromo-2-nitropropane-1,3-diol?

This substance has 6 hazard statements:

  • H228: Flammable solid.
  • H301 + H331: Toxic if swallowed or if inhaled.
  • H312: Harmful in contact with skin.
  • H315: Causes skin irritation.
  • H318: Causes serious eye damage.
  • H335: May cause respiratory irritation.

What is the melting point of 2-Bromo-2-nitropropane-1,3-diol?

The melting point is ca 122-132 °C (ca 252-270 °F) and the boiling point is Not determined.