NextSDS Logo
Safety Data Sheet EN

2-Chloro-6-(trichloromethyl)pyridine

CAS 1929-82-4
EC 217-682-2

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
2-Chloro-6-(trichloromethyl)pyridine
Product Code
H66418
Chemical Name
2-Chloro-6-(trichloromethyl)pyridine

Regulatory Identifiers

CAS Number
1929-82-4 Check regulations →
EC Number
217-682-2 Check regulations →

Identified Uses

SU24 Scientific research and development

Manufacturers & Suppliers

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc. logo

Alfa Aesar Thermo Fisher Scientific Chemicals, Inc.

manufacturer

30 Bond Street, Ward Hill, MA 01835-8099

800-343-0660

http://www.alfa.com

Emergency Contacts

Emergency Contact

(800) 343-0660

Monday-Friday, 8am-7pm EST

Carechem 24

(866) 928-0789

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Acute Tox. Cat. 4 H302

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H302 Harmful if swallowed.

Precautionary Statements

P264 Wash thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P301+P312 IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.
P330 Rinse mouth.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance

Chemical characterization: Substances

Chemical Name CAS Number Concentration Hazardous
2-Chloro-6-(trichloromethyl)pyridine EC: 217-682-2 1929-82-4 100% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm.

Skin contact

Immediately wash with water and soap and rinse thoroughly.

Eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Ingestion

Seek medical treatment.

Symptoms: Harmful if swallowed.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

Hands

Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Penetration time of glove material (in minutes) Not determined

Eyes

Safety glasses

Respiratory

Use suitable respirator when high concentrations are present. Recommended filter device for short term use: Use a respirator with type P100 (USA) or P3 (EN 143) cartridges as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. 'Only use equipment tested and approved under appropriate government standards.

Skin/Body

Protective work clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Partition Coefficient
---
Decomposition Temperature
Not determined
Odor Threshold
Not determined.
Physical State Data
---
Melting Point
60-65 ℃ (140-149 °F)
Metal Corrosion
---
Colour Intensity
---
Appearance
Powder
Solubility In Fat
---
Vapor Density
Not applicable.
Solubility In Water
0.04-0.06 g/l
Physical State
---
Solidification Point
---
Flash Point
100 °℃ (212 ºF)
Bulk Density
---
Form
---
Odor
Not determined
Properties Status
---
Auto Ignition Temperature
Not determined.
Freezing Point
---
Softening Point
---
Colour
---
Density
Not determined
Kinematic Viscosity
Not applicable.
Crystallisation Point
---
State Under Standard Conditions
---
Relative Evaporation Rate
---
Solubility
---
Voc Content
---
Upper Explosive Limit
Not determined
Ph
Not applicable.
Lower Explosive Limit
Not determined
Dynamic Viscosity
Not determined.
Evaporation Rate
Not applicable.
Cloud Point
---
Explosive Limits
---
Vapor Pressure
Not applicable.
Flammability
Not determined.
Boiling Point
Not determined
Molecular Weight
---
Relative Density
Not determined.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN3077
Shipping Name
Environmentally hazardous substances, solid, n.o.s. (2-Chloro-6-(trichloromethyl) pyridine)
Transport Class
9
Packing Group
III
IMDG

F-A,S-F Warning: Miscellaneous dangerous substances and articles

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for 2-Chloro-6-(trichloromethyl)pyridine?

The signal word is warning.

What is 2-Chloro-6-(trichloromethyl)pyridine used for?

SU24 Scientific research and development

What are the hazard statements for 2-Chloro-6-(trichloromethyl)pyridine?

This substance has 1 hazard statement:

  • H302: Harmful if swallowed.

What is the melting point of 2-Chloro-6-(trichloromethyl)pyridine?

The melting point is 60-65 ℃ (140-149 °F) and the boiling point is Not determined.

Compliance Scanner

Scan your compliance