Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- WARFARIN PESTANAL (4-HYDROXY-3-(3-OXO-1-PHENYLBUTYL) COUMARINE), 250 MG
- Product Code
- 45706
- Chemical Name
- 4-HYDROXY-3-(3-OXO-1-PHENYLBUTYL) COUMARINE
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Sigma-Aldrich
manufacturer
3050 Spruce Street, SAINT LOUIS MO 63103 US
800-325-5832
Emergency Contacts
Emergency Contact
314-776-6555
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 3-(A-ACETONYLBENZYL) 4-HYDROXYCOUMAR IN | 81-81-2 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, remove to fresh air. If not breathing give artificial respiration. If breathing is difficult, give oxygen.
In case of skin contact, flush with copious amounts of water for at least 15 minutes. Remove contaminated clothing and shoes. Call a physician.
In case of contact with eyes, flush with copious amounts of water for at least 15 minutes. Assure adequate flushing by separating the eyelids with fingers. Call a physician.
If swallowed, wash out mouth with water provided person is conscious. Call a physician immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide, dry chemical powder, or appropriate foam.
Emits toxic fumes under fire conditions.
Firefighter Protection
Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate area.
Sweep up, place in a bag and hold for waste disposal.
Materials: bag
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
User Exposure: Do not breathe dust. Do not get in eyes, on skin, on clothing. Avoid prolonged or repeated exposure.
Keep tightly closed.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Safety shower and eye bath. Use only in a chemical fume hood.
Compatible chemical-resistant gloves.
Chemical safety goggles.
Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Where risk assessment shows air-purifying respirators are appropriate use a full-face particle respirator type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable
Will not occur
Strong oxidizing agents, Strong acids, Strong bases
Carbon monoxide, Carbon dioxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contact a licensed professional waste disposal service to dispose of this material.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2811
- Shipping Name
- Toxic solids, organic, n.o.s.
- Transport Class
- 6.1
- Packing Group
- I
Regulatory Information
Chemical regulations, safety assessments, and compliance status
EU: Toxic (T). US: Highly Toxic (USA), Toxic (EU). Product subject to SARA section 313 reporting requirements. Contains substances known to the state of California to cause developmental toxicity.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for WARFARIN PESTANAL (4-HYDROXY-3-(3-OXO-1-PHENYLBUTYL) COUMARINE), 250 MG?
The signal word is warning.
What is the physical form of WARFARIN PESTANAL (4-HYDROXY-3-(3-OXO-1-PHENYLBUTYL) COUMARINE), 250 MG?
WARFARIN PESTANAL (4-HYDROXY-3-(3-OXO-1-PHENYLBUTYL) COUMARINE), 250 MG is a solid appearing as physical state: solid .
What is the solubility of WARFARIN PESTANAL (4-HYDROXY-3-(3-OXO-1-PHENYLBUTYL) COUMARINE), 250 MG?
Solubility in Water:Insoluble. Solvent: 50 mg/ml dioxane 50 mg/ml, Acetone Ether
What are the hazard statements for WARFARIN PESTANAL (4-HYDROXY-3-(3-OXO-1-PHENYLBUTYL) COUMARINE), 250 MG?
This substance has 5 hazard statements:
- H312: Harmful in contact with skin.
- May cause harm to the unborn child.
- Very toxic if swallowed.
- Toxic: danger of serious damage to health by prolonged exposure if swallowed.
- Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
What is the melting point of WARFARIN PESTANAL (4-HYDROXY-3-(3-OXO-1-PHENYLBUTYL) COUMARINE), 250 MG?
The melting point is 162.0 - 164.0 °C .