Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Thiophosphoryl chloride
- Product Code
- 65108
Regulatory Identifiers
- CAS Number
- 3982-91-0 Check regulations →
- EC Number
- 223-622-6 Check regulations →
Identified Uses
SU24 Scientific research and development
Manufacturers & Suppliers
Alfa Aesar / Thermo Fisher Scientific Chemicals, Inc.
manufacturer
30 Bond Street, Ward Hill, MA 01835-8099
800-343-0660
http://www.alfa.com
Emergency Contacts
Emergency Contact
(800) 343-0660
Monday-Friday, 8am-7pm EST
Carechem 24
(866) 928-0789
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS06
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Thiophosphoryl chloride EC: 223-622-6 | 3982-91-0 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air. If required, provide artificial respiration. Keep patient warm. Seek immediate medical advice.
Immediately wash with water and soap and rinse thoroughly. Seek immediate medical advice.
Rinse opened eye for several minutes under running water. Then consult a doctor.
Seek medical treatment.
Immediate Medical Attention
Seek immediate medical advice.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Product is not flammable. Use fire-fighting measures that suit the surrounding fire.
If this product is involved in a fire, the following can be released: Sulfur oxides (SOx), Phosphorus oxides, Hydrogen chloride (HCl)
Firefighter Protection
Wear self-contained respirator. Wear fully protective impervious suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away. Ensure adequate ventilation.
Do not allow material to be released to the environment without proper governmental permits.
Absorb with liquid-binding material. Use neutralizing agent.
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Thionyl chloride
CAS: 7719-09-7
p-Phthaloyl chloride
CAS: 100-20-9
Tris(2-chloroethyl) phosphate
CAS: 115-96-8
Terephthaloyl chloride
CAS: 100-20-9
Chromyl chloride
CAS: 14977-61-8
Phosphorus(III) chloride
CAS: 7719-12-2
Triphenyl phosphate
CAS: 115-86-6
Triphenylphosphite
CAS: 101-02-0
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle under dry protective gas. Keep container tightly sealed. Ensure good ventilation at the workplace.
Store in cool, dry place in tightly closed containers. Store under dry inert gas. Store in cool, dry conditions in well sealed containers.
The product is not flammable
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.
Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer.
Tightly sealed goggles. Full face protection.
Use suitable respirator when high concentrations are present.
Protective work clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
No information known.
No dangerous reactions known
No further relevant information available.
Oxidizing agents, Water/moisture
Sulfur oxides (SOx), Phosphorus oxides (e.g. P2O5), Hydrogen chloride (HCl)
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Consult state, local or national regulations to ensure proper disposal.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1837
- Shipping Name
- Thiophosphoryl chloride
- Transport Class
- 8
- Packing Group
- II
Warning: Corrosive substances
Warning: Corrosive substances
Warning: Corrosive substances
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Thiophosphoryl chloride?
The signal word is danger.
What is the physical form of Thiophosphoryl chloride?
Thiophosphoryl chloride is a liquid appearing as not determined . It has not determined odor.
What is Thiophosphoryl chloride used for?
SU24 Scientific research and development
What are the hazard statements for Thiophosphoryl chloride?
This substance has 3 hazard statements:
- H301 + H311: Toxic if swallowed or in contact with skin.
- H314: Causes severe skin burns and eye damage.
- H332: Harmful if inhaled.
What is the melting point of Thiophosphoryl chloride?
The melting point is Not determined and the boiling point is 122-124 °C (252-255 °F).