NextSDS Logo
Safety Data Sheet EN

(+/-)-4-Methyl-2-pentanol

CAS 108-11-2
EC 203-551-7

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
(+/-)-4-Methyl-2-pentanol
Chemical Name
(+/-)-

Regulatory Identifiers

CAS Number
108-11-2 Check regulations →
EC Number
203-551-7 Check regulations →

Identified Uses

SU24 Scientific research and development

Uses advised against

No further relevant information available.

Manufacturers & Suppliers

Alfa Aesar logo

Alfa Aesar

manufacturer

30 Bond Street, Ward Hill, MA 01835-8099

800-343-0660

http://www.alfa.com

Emergency Contacts

Alfa Aesar

800-343-0660

Monday-Friday, 8am-7pm EST

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Flam. Liq. Cat. 3 H226
STOT SE Cat. 3 H335

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

Hazard Statements

H226 Flammable liquid and vapor.
H335 May cause respiratory irritation.

Precautionary Statements

P262 Do not get in eyes, on skin, or on clothing.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
(+/-)- EC: 203-551-7 108-11-2 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm.

Skin contact

Immediately wash with water and soap and rinse thoroughly.

Eye contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Ingestion

Seek medical treatment.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.

Hands

Impervious gloves. Check protective gloves prior to each use for their proper condition. The selection of suitable gloves not only depends on the material, but also on quality. Quality will vary from manufacturer to manufacturer. Penetration time of glove material (in minutes) Not determined

Eyes

Safety glasses with side shields / NIOSH (US) or EN 166(EU)

Respiratory

Use suitable respirator when high concentrations are present. Recommended filter device for short term use: Use a respirator with multi-purpose combination (US) or type ABEK (EN 14387) as a backup to engineering controls. Risk assessment should be performed to determine if air-purifying respirators are appropriate. Only use equipment tested and approved under appropriate government standards such as NIOSH (USA) or CEN (EU).

Skin/Body

Protective work clothing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Not determined.
Colour
---
Colour Intensity
---
Form
Liquid
Odor
Slightly sweetish
Odor Threshold
Not determined.
Ph
Not determined.
Melting Point
-90 °C (-130 °F)
Boiling Point
131-133 °C (268-271 °F)
Flash Point
41 °C (106 °F)
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not determined.
Vapor Pressure
7 hPa (5 mm Hg)
Vapor Density
Not determined.
Relative Density
Not determined.
Bulk Density
---
Density
0.806 g/cm3 (6.726 lbs/gal)
Flammability
Not determined.
Upper Explosive Limit
5.5 Vol %
Lower Explosive Limit
1 Vol %
Explosive Limits
---
Auto Ignition Temperature
Not determined.
Decomposition Temperature
Not determined.
Solubility
---
Partition Coefficient
Not determined.
Solubility In Water
18 g/l
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
5.2 mPas
Kinematic Viscosity
Not determined.
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN2053
Shipping Name
Methyl isobutyl carbinol
Transport Class
8
Packing Group
III
IMDG

EMS Number: F-E,S-Ď

IATA

EMS Number: F-E,S-Ď

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for (+/-)-4-Methyl-2-pentanol?

The signal word is warning.

What is the physical form of (+/-)-4-Methyl-2-pentanol?

(+/-)-4-Methyl-2-pentanol is a liquid appearing as not determined. . It has slightly sweetish odor.

What is (+/-)-4-Methyl-2-pentanol used for?

SU24 Scientific research and development

What are the hazard statements for (+/-)-4-Methyl-2-pentanol?

This substance has 2 hazard statements:

  • H226: Flammable liquid and vapor.
  • H335: May cause respiratory irritation.

What is the melting point of (+/-)-4-Methyl-2-pentanol?

The melting point is -90 °C (-130 °F) and the boiling point is 131-133 °C (268-271 °F).

Compliance Scanner

Scan your compliance